TsRemux v0.21.2: Transport Stream De/Re-muxer

[dade49]

I don't know if I am in the right forum for this, but I know some of you will be able to answer this for me: I have some blu ray rips that are DTS HD Master Audio and my Tvix 4100 media streamer can't recognize it, and the only other audio options aren't in english. What do I do to convert that DTS HD Master Audio to Dolby Digital? I am not an expert, but I am guessing I have to use some kind of demuxer to get the audio out, then convert the audio, and then remux everything. I don't know what to use. Any help would be great. Thanks.

Let me guess..... It's the Flyboys BD?

This is referenced in some earlier posts in this thread, but here's a quick synopsis.

1) Demux the DTS-HD Master track with TSremux. Open the m2ts file, right click on the DTS-HD track and extract elementary stream. Name it dts-hd.dts

2) Run DTScore.exe dts-hd.dts core.dts - This extracts the basic (normal) DTS stream from the HD DTS stream.

3) Run Tranzcode_0.4beta and extract 6 wav's from the core.dts file.

4) Use BeSweet (newest beta) to merge the 6 wav's into an AC3 or flac file. You choose your output.

I was able to create a 640k AC3 stream from the DTS-HD Master stream. All of these utilities can by found by searching the Doom9 forums. Good luck to you.

[maya]

Let me guess..... It's the Flyboys BD?

This is referenced in some earlier posts in this thread, but here's a quick synopsis.

1) Demux the DTS-HD Master track with TSremux. Open the m2ts file, right click on the DTS-HD track and extract elementary stream. Name it dts-hd.dts

2) Run DTScore.exe dts-hd.dts core.dts - This extracts the basic (normal) DTS stream from the HD DTS stream.

3) Run Tranzcode_0.4beta and extract 6 wav's from the core.dts file.

4) Use BeSweet (newest beta) to merge the 6 wav's into an AC3 or flac file. You choose your output.

I was able to create a 640k AC3 stream from the DTS-HD Master stream. All of these utilities can by found by searching the Doom9 forums. Good luck to you.

Dade49,
Thanks. I will give it a shot, though this might all be over my head. By the way, it isn't just flyboys, it's every Fox title I think-I have about 6 and all of them have this problem.

[enjoyer]

what does the option *use async I/O* in tsremux mean?

[maya]

Let me guess..... It's the Flyboys BD?

This is referenced in some earlier posts in this thread, but here's a quick synopsis.

1) Demux the DTS-HD Master track with TSremux. Open the m2ts file, right click on the DTS-HD track and extract elementary stream. Name it dts-hd.dts

2) Run DTScore.exe dts-hd.dts core.dts - This extracts the basic (normal) DTS stream from the HD DTS stream.

3) Run Tranzcode_0.4beta and extract 6 wav's from the core.dts file.

4) Use BeSweet (newest beta) to merge the 6 wav's into an AC3 or flac file. You choose your output.

I was able to create a 640k AC3 stream from the DTS-HD Master stream. All of these utilities can by found by searching the Doom9 forums. Good luck to you.

Ok, I pulled out the DTS-HD Master stream with tsremux, and now I get an error with DTScore.exe when I use it:
Autoit Error
Error: Unable to execute the external program
The system cannot find the file specified

Also, assuming you can help me out with that error, a couple more questions
1) How exactly do I use Tranzcode and BeSweet? It appears that I need to open up a command prompt window, and I am not too familiar with those. What should I type in for each of those programs?

[Alkasar]

if you dont like command line, you could use this litt tool to convert DTS to AC3 (it uses tranzcode+aften. Aften is better than besweet/ffmpeg ac3enc engine)

http://alkasar.online.fr/Softs/dts2ac3 v0.3.rar

edit : oops... i realize the readme and tool is in french.
Just extract and copy everything somewhere on your pc and double click the .hta file.
Usage should be selfexplanatory.

[maya]

if you dont like command line, you could use this litt tool to convert DTS to AC3 (it uses tranzcode+aften. Aften is better than besweet/ffmpeg ac3enc engine)

http://alkasar.online.fr/Softs/dts2ac3 v0.3.rar

edit : oops... i realize the readme and tool is in french.
Just extract and copy everything somewhere on your pc and double click the .hta file.
Usage should be selfexplanatory.

I tried this and th same error comes up:
"The system can't find the file specified"

Anyone have any ideas?

[kvoss]

I found this (http://www.schudy.de/dts/dts2ac3.htm), but in german.

kvoss

[Selur]

@kvoss: there's also englisch version of the side: http://www.schudy.de/dts/dts2ac3-e.htm

[dmz01]

what does the option *use async I/O* in tsremux mean?

Reads and writes from/to disk are asynchronous. This requires additional buffering and on some systems gives you errors. By unchecking the box you force the reads/writes to be synchronous to make it more compatible with various systems at a slight performance expense.

[oldpainless]

Reads and writes from/to disk are asynchronous. This requires additional buffering and on some systems gives you errors. By unchecking the box you force the reads/writes to be synchronous to make it more compatible with various systems at a slight performance expense.

Hi dmz01, was that MKV sample I sent you the link for any use? (and yes, that was an indirect question about you know what....lol)

Kevin

[dmz01]

Hi dmz01, was that MKV sample I sent you the link for any use? (and yes, that was an indirect question about you know what....lol)

Kevin

Yes thank you, and yes, please wait a little longer. ;)

[ACrowley]

Ive Problem with TSRemux

Whne i load a .evo or m2ts i get a Error "Not enough System Ressources to run the Service"

?

[colinhunt]

Ive Problem with TSRemux

Whne i load a .evo or m2ts i get a Error "Not enough System Ressources to run the Service"
The answer is in this very thread - several times.

[dorati]

OK. Managed to finally burn a BDMV created with version 12. Disc plays fine in PS3, I can see a picture but there's no sound. Exactly the same results as with the previous version; PS3 reports nothing about audio etc.

Panny BD10 again recognizes the disc as BD and tries to play it. After a couple of seconds of black screen player display reads STOP and playback stops.

I seem to remember that PC-burned BD-REs used to work on the Panny, but that was before I updated its firmware to v2.0. Maybe that disabled non-AACS BD-RE support?

There are any news?
Now I have a Panasonic BDP-10 Player. -))
But I have trouble with the Remuxed Streams - the won't play.
For example:
- When I remux to Blu-Ray and burn, the Panasonic recognized the Disk, will play, but later 1 Sec stops playing.

Then I found out this:
-I have one other BDMV-Directory on Harddisk. When I burn this,
the Panasonic says BD-Video and plays fine.
When I remux the m2ts-Stream of this Direcotry (h.264 + AC3) I get one new m2ts-Stream withe the same Audio and Video. Then I only replace the m2ts-Stream in the BDMV-Directory and burn again.
The Panasonic don't play. (He will beginn, but later one Second he Stops). I think, now he don't like something in the new m2ts-Stream.

[dd03pehe]

Has123 and enjoyer,
This method that dorati wrote (the post from 30th of june) works for me, my PS3 recognizes it as AVCHD and its playing with AC3 sound.

--->
Start Nerovision and create a AVCHD Projekt.
Add some valid Videoclips (30 Sek. or so) and burn the Projekt on a DVD-RW. It is importand to burn and not to cancel. If cancel, all Tempdata are erased. Later Burn DON'T close the aplikation

Now, in Dokumente und Einstellungen\User\Lokale Einstellungen\Temp\NeroHDDVDxxxxxx (on German XP) you found a BDMV-Folder.
Nero generated a 00000.m2ts.
I change this with the 00001.m2ts from TSRemux (renamed).
Then I change in CLIPINF the 00000.clpi with the one of TSRemux (renamed). And at last in PLAYLIST the 00000.mpls. But in this 00000.mpls I changed with a HexEditor the 00001.m2ts in 00000.m2ts (For Play the right file).

Now you say in NeroVision Burn again and Nero is burning the updated Data.

All is playing fine on my PS3. Subtitle, AC3-Output.

[enjoyer]

when I try to insert a *.m2ts in nero vision (make dvd..-->AVCHD-->Add Video Files..) I always get an error report.

I have v.4.9.7.2....maybe it is the wrong version?

[dd03pehe]

when I try to insert a *.m2ts in nero vision (make dvd..-->AVCHD-->Add Video Files..) I always get an error report.

I have v.4.9.7.2....maybe it is the wrong version?


Try to pick one of the h264 samples from http://x264.nl/h.264.samples they work fine for me.
When you have burned your project, do the steps mentioned above, and choose burn again. :)

[AFSS]

Hi dmz01, sorry for being so anxious..., but are you making good progress on the MKV support ? If you want candidates to test beta releases, please you can count me in !!

[Has123]

Has123 and enjoyer,
This method that dorati wrote (the post from 30th of june) works for me, my PS3 recognizes it as AVCHD and its playing with AC3 sound.

--->
Start Nerovision and create a AVCHD Projekt.
Add some valid Videoclips (30 Sek. or so) and burn the Projekt on a DVD-RW. It is importand to burn and not to cancel. If cancel, all Tempdata are erased. Later Burn DON'T close the aplikation

Now, in Dokumente und Einstellungen\User\Lokale Einstellungen\Temp\NeroHDDVDxxxxxx (on German XP) you found a BDMV-Folder.
Nero generated a 00000.m2ts.
I change this with the 00001.m2ts from TSRemux (renamed).
Then I change in CLIPINF the 00000.clpi with the one of TSRemux (renamed). And at last in PLAYLIST the 00000.mpls. But in this 00000.mpls I changed with a HexEditor the 00001.m2ts in 00000.m2ts (For Play the right file).

Now you say in NeroVision Burn again and Nero is burning the updated Data.

All is playing fine on my PS3. Subtitle, AC3-Output.

Thanks for the reply. I did try this but for some reason it did not work. PS3 recognize it as AVCHD but a short empty clip plays. I did all the steps including replacing the CLIPINF file and hexediting mpls file. I'll really appreciate it if you can explain the steps again to see exactly what I am doing wrong. By the way, what firmware do you have?
Thanks,

[dd03pehe]

Thanks for the reply. I did try this but for some reason it did not work. PS3 recognize it as AVCHD but a short empty clip plays. I did all the steps including replacing the CLIPINF file and hexediting mpls file. I'll really appreciate it if you can explain the steps again to see exactly what I am doing wrong. By the way, what firmware do you have?
Thanks,

I'm on firmware 1.82. Try to change the level on the .h264 file to 4.1 in h264info.
Btw. Are you trying this on demuxed .mkv's that you muxed using ffmpeg or xmuxer? Because I don't think anyone has got that to work yet. The file i used was a .m2ts from a bluray disc that I ran in tsremux with bluray setting.

Can't wait for mkv support in tsremux.. ;)

[Has123]

Thanks. My source is 1080i mpeg ac3 ts file from a moded dish receiver and muxed with TSRemux Bluray.

[InorganicMatter]

Excuse me for an extremely stupid question, but how do you demux something with this program? I see the options to rebuild an M2TS, TS, or BD Rip, but I don't see the option to just dump each stream to separate files.

I know, go ahead and make fun of me. :p

[eas4uk]

Right click on the stream - that will give you the options you need

[InorganicMatter]

Right click on the stream - that will give you the options you need

I knew it was something stupidly simple like that. :rolleyes: :thanks:

[oldpainless]

DMZ01...how's the MKV thing comming on?

K

[mark_in_2k]

DMZ01...how's the MKV thing comming on?

K+1
Don't want to rush you or anything though. I'm sure we all appreciate the effort you're putting in. I certainly do. :thanks:

[oldpainless]

:):):):):thanks:

[hollydoc]

Originally Posted by dorati
@dmz01: When I use your TsRemux and select for output;Blu-Ray - you generated a file 00001.m2ts. You can change this to 00000.m2ts?? Why? I found this great solution, but I must rename some files and use a Hexeditor:

I don't have a Blu-Ray Burner.
I write the generated BDMV-Folder to DVD in all different formats, but my PS3 never wan't to play this DVD (Mini-BluRay).

But you can create HighDefinition DVD's using the AVCHD-Format.
The only Programm I found witch can write this format was NeroVision 4.
But always - you create a Projekt, the Video is Transcoding and it is not Possible for 23,975fps (only 25fps and 29,97).

But how to burn without transcoding?

I found a way, that is a little tricky - but it works --))

Start Nerovision and create a AVCHD Projekt.
Add some valid Videoclips (30 Sek. or so) and burn the Projekt on a DVD-RW. It is importand to burn and not to cancel. If cancel, all Tempdata are erased. Later Burn DON'T close the aplikation

Now, in Dokumente und Einstellungen\User\Lokale Einstellungen\Temp\NeroHDDVDxxxxxx (on German XP) you found a BDMV-Folder.
Nero generated a 00000.m2ts.
I change this with the 00001.m2ts from TSRemux (renamed).
Then I change in CLIPINF the 00000.clpi with the one of TSRemux (renamed). And at last in PLAYLIST the 00000.mpls. But in this 00000.mpls I changed with a HexEditor the 00001.m2ts in 00000.m2ts (For Play the right file).

Now you say in NeroVision Burn again and Nero is burning the updated Data.

All is playing fine on my PS3. Subtitle, AC3-Output.



The methode works fine. Also with VC-1 and MPEG2 video codec. I have create any AVCHD´s


My Metode:

m2tsfron Blu-ray -> VC-1 + ac3 -> TSmux -> to m2ts
m2ts -> HDBDSplitGUI -> part1-3.m2ts
part1.m2ts -> TSRemux -> Bluray

And then your method with Nero ans AVCHD. All 3 Discs are playin on PS3 VC1 Video and AC3 Sound, without any Problems

I have also tested MPEG2 + DTS, PS3 with Firmware 1.81 , mo Problem.

:thanks:dorati

Hollydoc

[enjoyer]

is there any tool which can remux mkv to ts????

...I found a tool *mkv2ts*(http://alkasar.online.fr/mkv2ts.html) which can remux mkv to ts....but after remux the ts to blu ray with tsremux, the file grew and blew up the dvd5 limit :(

but i will test a sample tomorrow


ok...I tested a sample but i didnt work! I guess the problem is that tsremux doesnt create a clipinf when the source is a 720p ts file :(

[Alkasar]

is there any tool which can remux mkv to ts????

...I found a tool *mkv2ts*(http://alkasar.online.fr/mkv2ts.html) which can remux mkv to ts....but after remux the ts to blu ray with tsremux, the file grew and blew up the dvd5 limit :(

but i will test a sample tomorrow


ok...I tested a sample but i didnt work! I guess the problem is that tsremux doesnt create a clipinf when the source is a 720p ts file :(
hello enjoyer, glad that you found the tool ;)
the aim of mkv2ts is to convert without transcoding MKV(h264+ac3) to TS to make them playable on devices using SMP8634 chip such as the freebox -a set top box popular in France- or the Tvix players.
The tool has evolved quite a lot over time and we're still trying various methods (actually Directshow graphs) depending on the version of the tool. 186 pages on the forum thread ! mkv2ts uses the mainconcept directshow filter to mux the TS.

The the latest version 0.86 is quite stable.
Still looking to improve the method and tool to make it work on all movies for our purpose, wich is not universal.

I am looking forward to see TSRemux support for mkv...

[moshmothma]

I am having some strange issue converting an EVO to TS. The EVO is from King Kong.

1. Does TSREmux not handle the DD+ when converting? I see several posts hinting at that but am still not sure.
2. I am trying to use the trim editor. I choose a 5 minute clip however, the resulting file is nearly as large as the original. (it does start in the right place at least but does not do the end trim it looks like.)

I am using TSremux 0.16.

Thanks

[survivant]

Can I extract the h264 stream from a mkv or an mp4 and put it into TSRemux ?

[Xfab29]

Does someone know why tsremux refuse to make the whole bluray structure (clip.inf, playlist not created) with a m2ts file (mp4 avc + ac3)?


the m2ts resulting is playing fine in the PS3 except the ac3 sound (normal!)

thanks

[enjoyer]

with the *ffmpeg* method and tsremux we can remux our mkv files to .*m2ts.

A AVCHD structure output in tsremux would be very nice :D

[gigo979]

with the *ffmpeg* method and tsremux we can remux our mkv files to .*m2ts.

A AVCHD structure output in tsremux would be very nice :D

you can please describe the complete procedure?

Sorry for my English, I am Italian

Thanks

Bye

[hollydoc]

I have optmized the method from dorati to create a AVCHD:

1.Start Nerovision and create a AVCHD Projekt.
Add some valid Videoclips (30 Sek. or so) and burn the Projekt on a DVD-RW. It is importand to burn and not to cancel. If cancel, all Tempdata are erased. Later Burn DON'T close the aplikation

Now, in Dokumente und Einstellungen\User\Lokale Einstellungen\Temp\NeroHDDVDxxxxxx (on German XP) you found a BDMV-Folder.

2. Copy the comlete folder NeroHDDVDxxxxxx form the temporary directoy to another place on our Harddisc and rename to AVCHD_empty. You can Use This "empty" Folder also all future projects

3. open TSRemux, geneteta a BluRay

4. copy the folders Stream, Clipinf and Playlist fromTSRemux /BDMV-Folder to AVCHD_emty/BDMV-Folder( overwrite the Exising Folders)

5. Don`t rename 00001.m2ts and 00001.clpi and don`t change the 00000.mpls with a HexEditor , it is not nessesary.

6. Open Nero Burning Rom > DVD-ROM UDF 2,50

7. burn the comlete BDMV-Folder frpm AVCHD_emty on a DVD

8. The PS§(FW1.81) says AVCHD and the Disk plays fine with 24p videoplayback and AC3 or DTS 5.1 sound.

Hollydoc

[gigo979]

thanks hollydoc, this evening I try :thanks:

[enjoyer]

very nice hollydoc!!!! :D

the problem is I dont get a clipinf when I use 720p files :(

[hollydoc]

I think this is a problem of our 720 p stream, i have a HDTV cap from the last Genesis concert in Germany MPEG2 720/50p AC3 5.1 448kbps. I have splitted the TS stram in Three parts, the AVCHD`s are playing perfect on PS3, my Sony Pearl shows 720P 50Hz.

Hollydoc

[jagaskywalker]

6. Open Nero Burning Rom > DVD-ROM UDF 2,50


I always had to burn it using UDF 2.6. When using 2.5 the disk appeared as data disk in the PS3 (I have fw 1.5). Did not tried this method yet, but I would suggest to use 2.6

Being so simple, would it be possible to dmz01 to add this AVCHD disk structure as an output option ?

Thank you

[survivant]

I try to put h264 into a .ts but I'm not able to play it on the PS3.

the .ts will play only, if I put mpeg-2 into it.

Is it me ?

[enjoyer]

I always had to burn it using UDF 2.6. When using 2.5 the disk appeared as data disk in the PS3 (I have fw 1.5). Did not tried this method yet, but I would suggest to use 2.6

Being so simple, would it be possible to dmz01 to add this AVCHD disk structure as an output option ?

Thank you

I am on fw 1.90 and UDF 2.50 works fine !!

and yes AVCHD structure output in tsremux would be nice :)

[Xfab29]

hello

why do i get the error "audio stream of type 4 is not supported by bluray" when i want to remux a ts (avc + ac3) to bluray structure?

thank you

[jagaskywalker]

New PS3 firmware 1.9 adds further support for AVCHD within Memory stick and Harddisk (within an AVCHD camcorder). Maybe if the AVCHD disk structure is replicated within an external Harddisk we could get ac3 5.1 instead of downmixed 2.0 without the need of burning a DVD...

Just an idea...

[Has123]

You'll still be limited with the 4gb FAT32 limit.

[enjoyer]

http://forum.doom9.org/showthread.php?p=906946

maybe my english sucks too hard lol but is this a method to remux mkv to ts???

[AFSS]

I also saw that post but could not get the right version of VLC that is indicated... I am anxoiusly waiting for TSremux but it looks like dmzo1 has disappeared for a while....

[gigo979]

a question:
the file *.m2ts must be by force 1280x720p or goes well also
1280x528 or 1280x544 for being accepted like disc dvd avchd?

P.S.: sorry for my english

Thanks

Bye

Gigo979

[hidef_rec]

1.Start Nerovision and create a AVCHD Projekt.
How do you do this? I don't see the option to do so. Thanks.

[zeropc]

why do i never get any audio and video display in vlc after remxuing a video with tsremux (0.0.16)?

i have no problem playing the newe files with powerdvd but since vlc is my main player, this kinda bugs me.