BluRip - BLURAY -> MKV (CONVERTER/REMUXER) [Archive] - Page 4

toathis

20th February 2010, 00:51

@Multitask

Replace MediaInfo.dll with what? where is the other file to replace it of the same name?

also, how do I save the pathways to the programs? Everytime I restart they disappear.

and now the thing doesn't work at all I hit "Get stream info" a few seconds later I get this

[2/19/2010 5:58:05 PM] Getting playlist info...
[2/19/2010 5:58:05 PM]
[2/19/2010 5:58:05 PM] Command: C:\Documents and Settings\Administrator\Desktop\eac3to.exe"H:\THE DARK KNIGHT"
[2/19/2010 5:58:05 PM]
[2/19/2010 5:58:05 PM] Done.

thanks

MuLTiTaSK

20th February 2010, 01:05

@toathis

try lastest release -> http://blurip.googlecode.com/files/blurip045.zip

toathis

20th February 2010, 01:15

@toathis

try lastest release -> http://blurip.googlecode.com/files/blurip045.zip

I did, same problem :(

MuLTiTaSK

20th February 2010, 01:21

@toathis

extract the .zip into a new folder run it point BluRip to all needed apps exit then open to see what happens;)

toathis

20th February 2010, 01:35

@toathis

extract the .zip into a new folder run it point BluRip to all needed apps exit then open to see what happens;)

Thank you for the fast replys. I have a lot of time on my hands tonight to get this working. I did what you said, created a new folder and extracted the files from the .zip. ONE PROBLEM SOLVED the settings did save. Unfortunately, I still get this error when I hit "Stream Infos"

[2/19/2010 6:32:30 PM] Getting playlist info...
[2/19/2010 6:32:30 PM]
[2/19/2010 6:32:30 PM] Command: C:\Documents and Settings\Administrator\Desktop\eac3to.exe"H:\THE DARK KNIGHT"
[2/19/2010 6:32:30 PM]
[2/19/2010 6:32:30 PM] Done.

Is there anything I need to do with AVIsynth? Do I still need to replace that media.dll file with something? and also Does it matter if any of the folders are not on the boot drive, are externals ok?

thanks again ;)

toathis

20th February 2010, 01:45

Update. I got the Get Stream infos to work! I will update and let you know how it goes. I needed to re-install eac3to

ron spencer

20th February 2010, 01:53

thanks for this...I did try interlaced source and framerate is picked up fine!!!

I noticed that in the General Settings page is an option to delete source files after mux...should this not be Working Files instead? AA user may not want bluray folders deleted.

toathis

20th February 2010, 04:33

So I got it to "Get Stream Infos" but shortly after encoding starts I get this error

[2/19/2010 9:28:43 PM] G:\Work\_002_video.mkv.ffindex already exits
[2/19/2010 9:28:43 PM] Starting AutoCrop...
[2/19/2010 9:28:46 PM] Exception: Script error: there is no function named "FFVideoSource"
(G:\Work\_cropTemp.avs, line 1)

MuLTiTaSK

20th February 2010, 04:37

@toathis

did you download and set the paths to the required tools?

MuLTiTaSK

20th February 2010, 04:43

@toathis

download -> ffmpegsource (bit.ly/dcrlOs)

ffmsindex.exe -> set file path in BluRip
ffms2.dll -> copy to your AviSynth plugins folder

_hawk_

20th February 2010, 09:43

_hawk_

20th February 2010, 09:43

@toathis

download -> ffmpegsource (bit.ly/dcrlOs)

ffmsindex.exe -> set file path in BluRip
ffms2.dll -> copy to your AviSynth plugins folder

Nice support :)
Maybe you are interested in writing a manual?

ron spencer

20th February 2010, 17:27

Is it possible to add an option to NOT remember the last project (paths, etc.)?

MuLTiTaSK

20th February 2010, 20:51

@_hawk_

i just try to help with what i know never forget we all start knowing zip;)

mackworth

20th February 2010, 21:53

Are people interested in FLAC support for eac3to? I just modified the code to allow the conversion to flac using the registered arcsoft decoders like ripbot.

If so I can clean it up and send a patch to hawk.

M3n747

20th February 2010, 22:05

I gotta say, this is a really neat piece of software. However, there are a few things that I feel would make it even better:

- freely resizeable window
- selecting streams with a checkbox
- ability to determine the output file size - a pulldown menu with the selection of 1/2 DVD5|DVD5|DVD9|Unrestricted Size would be sufficient

Especially that last one would be nice to have,seeing how 24 hours of encoding left me with a file too big to fit on a DVD. But nonetheless, good work! :)

MuLTiTaSK

20th February 2010, 22:06

@mackworth

please add flac support good stuff how about adding .ogg, .m4a conversion as-well using eac3to stdout?

MuLTiTaSK

20th February 2010, 22:09

@M3n747

_hawk_ said he plans on adding a bit-rate calculator soon;)

toathis

20th February 2010, 22:40

@Multitask

So the process ran for awhile and everything seem to be going smooth unfortunaitly I ran into a hiccup at the end

[2/20/2010 3:33:45 AM] Starting to demux...
[2/20/2010 3:33:45 AM]
[2/20/2010 3:33:45 AM] Command: C:\Documents and Settings\Administrator\Desktop\eac3to\eac3to.exe"H:\2001_SPACE_ODYSSEY" 1: "G:\Work\_001_chapter.txt" 2: "G:\Work\_002_video.mkv" 3: "G:\Work\_003_audio_ac3_English.ac3" 11: "G:\Work\_011_subtitle_English.sup" 12: "G:\Work\_012_subtitle_English.sup" 14: "G:\Work\_014_subtitle_German.sup" 15: "G:\Work\_015_subtitle_German.sup"
[2/20/2010 3:33:52 AM]
[2/20/2010 3:33:52 AM] Done.
[2/20/2010 3:33:53 AM] Error getting framerate

mackworth

20th February 2010, 23:48

@mackworth

please add flac support good stuff how about adding .ogg, .m4a conversion as-well using eac3to stdout?

I will add a checkbox to encode to FLAC when possible, that way when people don't have the Arcsoft DTS decoder, atleast TrueHD will be encoded.

I will also write something to test to see if the Arcsoft decoder is installed.

In regard to the other .ogg and acc, hawk what do you think? SHould I try to add that? If so, I would probably modify that whole audio section to better handle this.

ron spencer

21st February 2010, 00:16

MuLTiTaSK

21st February 2010, 02:28

@toathis & ron spencer

the error happens right after demuxing?

what os are you guys running (win7?) any decoders installed on your pc's (ffdshow?)

MuLTiTaSK

21st February 2010, 02:59

@toathis & ron spencer

i was able to demux a Blu-ray with a VC-1 stream successfully
what version of Haali Splitter you guys have installed?

install this version of Haali Splitter and see if it fixes the VC-1 framerate issue -> http://www.videohelp.com/download/MatroskaSplitter110109.exe

toathis

21st February 2010, 10:34

@MuLTiTaSK

I use Win XP x32

I already have that version of Matsplit. How does that program have any effect on the process, since you do not set a pathway to it?

_hawk_

21st February 2010, 11:07

@MuLTiTaSK

I use Win XP x32

I already have that version of Matsplit. How does that program have any effect on the process, since you do not set a pathway to it?

MediaInfo uses the splitter to access the videostream. Try to reinstall haali and avisynth - maybe this helps. Also make sure that visual c++ 2008 runtime is installed.

ron spencer

21st February 2010, 18:37

@toathis & ron spencer

the error happens right after demuxing?

what os are you guys running (win7?) any decoders installed on your pc's (ffdshow?)

I am using XP Pro XP3 all up-to-date
Using latest Haalit
Using ffshow...the one recommended for DVD Rebuilder
Happens after demux

I did get a VC-1 to work later though.

Not sure why such an error would occur...All you are doing is demuxing and remuxing streams to mkv. I wonder if it has to do with the fact that mediainfo is somehow involved and some VC-1 streams may be "problematic." I do not get these errors using Clown_BD and then mkvmergeGUI to mux. Strange. Maybe you should add an option for the user to manually enter the framerate...or you have an option to ALWAYS pass 24000/1.001, as 99% of Blu Rays are this anyway. Then user can override for some wacky interlaced stuff. This may be a good idea, just in case.

ron spencer

21st February 2010, 18:38

I noticed:

[2/20/2010 8:56:52 PM] Command: C:\Program Files\BluRip\mkvmerge.exe--title "test" -o "M:\MKV Final\test.mkv" --chapters "C:\temp\_001_chapter.txt" "C:\temp\_002_video.mkv" --language 0:en --default-track 0 "C:\temp\_003_audio_ac3_English.ac3"

you can also make chapters and audio specified as a language as well...can you set this to default as english or grab from user, or grab from what user has chosen?

_hawk_

21st February 2010, 18:47

I am using XP Pro XP3 all up-to-date
Using latest Haalit
Using ffshow...the one recommended for DVD Rebuilder
Happens after demux

I did get a VC-1 to work later though.

Not sure why such an error would occur...All you are doing is demuxing and remuxing streams to mkv. I wonder if it has to do with the fact that mediainfo is somehow involved and some VC-1 streams may be "problematic." I do not get these errors using Clown_BD and then mkvmergeGUI to mux. Strange. Maybe you should add an option for the user to manually enter the framerate...or you have an option to ALWAYS pass 24000/1.001, as 99% of Blu Rays are this anyway. Then user can override for some wacky interlaced stuff. This may be a good idea, just in case.

I use mediainfo to get the framerate to pass to bdsup2sub. I think it's a good idea to add a "choose framerate dialog" if mediainfo fails for some reason.

_hawk_

21st February 2010, 18:49

I noticed:

you can also make chapters and audio specified as a language as well...can you set this to default as english or grab from user, or grab from what user has chosen?

Yep I'll take a look at this.

mohamad_ir

24th February 2010, 20:39

all links deleted,please upload again.
excusme for english bad write.me cannot good speak english.
tanks.

willisurf

24th February 2010, 21:46

all links deleted,please upload again.
excusme for english bad write.me cannot good speak english.
tanks.Hi,
no problem. Are you looking for the download link for blurip?
This should work http://code.google.com/p/blurip/downloads/list
For Installation you may look here http://forum.doom9.org/showpost.php?p=1367545&postcount=21

MuLTiTaSK

25th February 2010, 01:00

@mohamad_ir

what links were deleted?

MuLTiTaSK

25th February 2010, 01:05

http://blurip.googlecode.com/files/blurip045.zip

mohamad_ir

26th February 2010, 22:48

all links deleted,please upload again(massege:http/1.1 403 forbidden).
please upload to mediafire.com or site suport resume.
dont upload in rapidshare and...

mohamad_ir

26th February 2010, 22:53

excuseme.
links open with ultra surf.
tank you.

willisurf

27th February 2010, 09:11

all links deleted,please upload again(massege:http/1.1 403 forbidden).

I just testet the links, everthing is working. Maybe you like to try another browser or even check from a different computer if avaiable. Are there some filters or restrictions in your country?

mohamad_ir

28th February 2010, 01:18

I just testet the links, everthing is working. Maybe you like to try another browser or even check from a different computer if avaiable. Are there some filters or restrictions in your country?

yes.
and open link with ultra surf 9.4.

willisurf

28th February 2010, 08:08

I just testet the links, everthing is working. Are there some filters or restrictions in your country?yes. and open link with ultra surf 9.4.
@MuLTiTaSK Is it possible to establish some alternative download, like mediafire?

MuLTiTaSK

28th February 2010, 08:23

BluRip v0.4.5 -> MediaFire Download Link (bit.ly/8Ysvei)

MuLTiTaSK

28th February 2010, 08:37

first post updated with MediaFire links;)

MuLTiTaSK

1st March 2010, 21:08

AddictiveTips Review:) -> BluRip: Bluray To MKV Converter (bit.ly/adKu2Q)

ron spencer

1st March 2010, 22:43

nice!!!

congrats on review...you have made a nice proggy

:thanks::thanks:

But hey...give us another version LOL!!!!

Kurtnoise

1st March 2010, 22:58

This GUI doesn't abide to the GPL license...don't use it.

setarip_old

1st March 2010, 23:09

Regarding the "Addictive Tips Review" - And yet once again, you fail to make it clear that most who would want to use this GUI/program with their purchased, commercial BluRay discs would first have to resort to a commercial (or soon to be commercial) program such as DVDFab, MakeMKV, or AnyDVDHD to eliminate protection...

Guest

1st March 2010, 23:22

This GUI doesn't abide to the GPL license...don't use it. Please explain further. If true the thread will be deleted if the situation is not corrected.

Kurtnoise

1st March 2010, 23:27

Please explain further. If true the thread will be deleted if the situation is not corrected.
This GUI uses some code from MeGUI (AvisynthWrapper.cs) but the original header from this file which contains the license has been removed & the GPL license file itself doesn't exist in the tree sources...

Guest

2nd March 2010, 00:50

@MuLTiTaSK

Please comment on this GPL situation and your plans to correct it. If you prefer PM that is fine.

mackworth

2nd March 2010, 01:24

I can add the license if needed (if we can't wait for hawk).

In regard to the source file header being removed, which file? I took a very quick the source avsynth wrapper stuff in blurip's google code and none of headers in the MeGUI repository look any different.

[edit]
And btw, I am pretty sure this is an oversight. I know people don't like stolen code and everything, but a an email to the google code could have gotten this corrected pretty easily, no need to say stuff like "don't use it".

Kurtnoise

2nd March 2010, 06:58

In regard to the source file header being removed, which file?
I've already mentioned the name of the file...

And btw, I am pretty sure this is an oversight. I know people don't like stolen code and everything, but a an email to the google code could have gotten this corrected pretty easily, no need to say stuff like "don't use it".
I don't care about that.I'm not involved in the MeGUI development anymore...It's just that you have to obey to the GPL. That's all.

MuLTiTaSK

2nd March 2010, 07:26

@neuron2

_hawk_ (bit.ly/8EVyuA) is the creator of BluRip;)

the issue raised by Kurt i'am sure can be resolved very easily if some kind of effort to communicate with him is made

BluRip Source Code -> Google Code (bit.ly/b5AXnA)