DG NV tools

[Guest]

Your stream is corrupted at that point, as you can easily see by playing it in MPC-HC.

[MOS-Marauder]

Your stream is corrupted at that point, as you can easily see by playing it in MPC-HC.


Now that u say it... i also see it :(.

So if i want to use it i have to cut that part out ?

Seems a Decoding Glitch from Sky.

If i use it like it is, i can create the DGI but on Encoding later it stops at that point.

Chris

[Guest]

So if i want to use it i have to cut that part out ? Obviously yes, but don't ask how in this thread as it would be off topic.

Seems a Decoding Glitch from Sky. More likely a dropout in your reception.

[hejhopp]

2012 fix my problem. thx neuron2!
:)

[MOS-Marauder]

Obviously yes, but don't ask how in this thread as it would be off topic.

More likely a dropout in your reception.

Of course i wont ;)

Thx Neuron.. and sorry for wasting Your Time on this one...


Chris

[rack04]

I have completed two encodes using the x64 binaries. No bugs to report. Thanks for the great work!

[tormento]

Using x64 build with MEGUI_x64. Everything works fine!

Thanks Neuron!

P.S: About auto crop - Usually it is better to avoid horizontal cropping to avoid resizing on full hd LCD. Should you put a feature in mod buttons such as 1st press horizontal crop, 2nd press vertical crop, 3rd both?

[Guest]

I don't understand the point. Anyway, use manual cropping for that.

[rajs]

Couple of feature requests:

1. Add a debug option (like 'info=1' in DGMPGDec).

2. Have an option to auto-resize pixels based on the aspect ratio info in the video stream (if present), i.e.
aspect_ratio_information in a MPEG2 stream
apect_ratio_idc parameter in a H.264 stream
ASPECT_RATIO syntax element in VC-1.

[tormento]

I don't understand the point. Anyway, use manual cropping for that.
The point is that sometimes only a few pixels lack to reach 1080 (i.e. they are black) and DGIndex crops them. Usually it is better to keep them not to get the video resized when playing.

[GZZ]

The point is that sometimes only a few pixels lack to reach 1080 (i.e. they are black) and DGIndex crops them. Usually it is better to keep them not to get the video resized when playing.


I havent seen a bluray where DGIndex have cut the video at less say 1920x1072 and then you have to resize it to 1080. I have seen DGIndex cut a few pixels off when it report the video as 1088, so we dont have to resize the video back to 1080 (making the AR at little bit off)..

[rica]

İ'm sorry guys, i've been away from this thread for some time.
Is there any way to apply Spline36 resizing with CUDA?

Edit:

Or is that the right recipe ?

LoadPlugin("C:\DGNV\DGMultiDecodeNV.dll")

DGMultiSource("C:\DGNV\Test\test_out.dgi")

Spline36Resize(720,576)

[Guest]

CUVID can only do bilinear at this time, which is typically fine for downsizing.

Your recipe is correct if you do not want bilinear.

[Guest]

I'm about to cut over to my new generation security:

* Asymmetric key encryption using RSA to kill serial gens.
* Various anti exe-cracking strategems.

When the cutover occurs, the license generator will generate only licenses for version 2013 and greater, which will be released at the same time. I will reset all license counts to 0 so that you can get licensed for versions going forward.

The license generator will be disabled for a short period during the cutover.

My previous "security" was laughably weak.

[rica]

CUVID can only do bilinear at this time, which is typically fine for downsizing.

Your recipe is correct if you do not want bilinear.

thanks Don. But what do you suggest for upsampling?

[Guest]

thanks Don. But what do you suggest for upsampling? You mean for CUVID? You can only use bilinear.

You mean for Avisynth? Hey, you tell me, I don't do upsampling. :p Anyway, your example above appears to be downsampling.

It's a topic for the Avisynth Usage forum.

[rica]

So you give me only this chance ? :)

LoadPlugin("C:\DGNV\DGMultiDecodeNV.dll")

DGMultiSource("C:\DGNV\Test\test_out.dgi",resize_w=720, resize_h=576)

[Guest]

Well you can crop first if you like (use the Cropping dialog in DGIndexNV). :)

[Audionut]

So you give me only this chance ?

Yes, bilinear is all there is. And it's due to being the only resizer available in the nvidia api.

I'm sure if nvidia adds more resizing methods to the api, neuron2 will implement them into dgdecnv.

[rica]

Yes, bilinear is all there is. And it's due to being the only resizer available in the nvidia api.

I'm sure if nvidia adds more resizing methods to the api, neuron2 will implement them into dgdecnv.

Thx, yes i'm awared of that. :)

[rica]

Well you can crop first if you like (use the Cropping dialog in DGIndexNV). :)

Yes, this is really one of the amazing features.
My friend welldone. And thx again.

[Guest]

Yes, this is really one of the amazing features. I remind the assembled multitudes that you were the person that proposed that, IIRC.

[rica]

I remind the assembled multitudes that you were the person that proposed that, IIRC.

I must have forgotten, i'm an old guy :) Sorry :p
:thanks:

[Karyudo]

I've got a Win7 64-bit system running OTA HD in Windows Media Center, and it would be really cool if DGIndexNV x64 could handle the DVR-MS and WTV HD files that Windows 7 Media Center (7MC) produces.

An old thread suggested there is/was a GraphEdit solution, and I know that VideoRedo handles one or both of these formats, but it would be so much more elegant if it were possible to make only one stop at DGIndexNV and be ready to process and encode.

And neither existing workflow works as a 64-bit native process, does it?

Neuron2, could you be convinced to revisit adding this functionality, now that a 64-bit decoding/indexing/serving app is needed for these formats?

[7ekno]

I'm about to cut over to my new generation security:


Nice!

Any pointers on what we need to do to get 2013 working fine with previous donations (although am happy to re-donate since I haven't in a while now!!)

Tek

[tormento]

I havent seen a bluray where DGIndex have cut the video at less say 1920x1072
You are are not a film eater like I am, perhaps.

I buy about 3 BD per week (and usually sell them after a month if not good enough) and look most of them on laptop during train travels. There are a lot of BD that get resized to strange resolutions from autocrop, both DGIndex and other encoding GUI's.

I forgot most of those, the next one I'll report you. They usually get some strange horizontal resolution as some lateral pixels are black or very dark grey.

[tormento]

neuron:

1) If I have two nvidia card, how should I address nvtools to the wanted one?
2) How is the mpls parser going? ;)

[MOS-Marauder]

I'm about to cut over to my new generation security:

...

My previous "security" was laughably weak.

Of course.. it was about Time... Too mich ppl used Keygens.

Chris

[Guest]

Neuron2, could you be convinced to revisit adding this functionality, now that a 64-bit decoding/indexing/serving app is needed for these formats? Adding to the to-do list.

[Guest]

Any pointers on what we need to do to get 2013 working fine with previous donations (although am happy to re-donate since I haven't in a while now!!) You just go to the old licensing page and start over for your new license.

It's all in place now. You can download 2013 and generate your license. Let me know if it works. :)

The page is:

http://neuron2.net/licensing.html

[Guest]

1) If I have two nvidia card, how should I address nvtools to the wanted one? It always uses the first one.
2) How is the mpls parser going? It is still on my to-do list. I wanted to get my new security in place before adding the elite features. Addition of said features will then obsolete the older versions.

[rack04]

So far so good with the new security.

[MOS-Marauder]

You just go to the old licensing page and start over for your new license.

It's all in place now. You can download 2013 and generate your license. Let me know if it works. :)

The page is:

http://neuron2.net/licensing.html


For me its not... my User is not found.

Chris

[Guest]

All queries about licensing need to go to me vial email. I won't discuss it further here. When contacting me, you'll need to use the same email you used to register originally and tell me your user id.

[Guest]

The user management part was not changed, if you had a functioning user ID it should still work. My point is I don't want to manage users here but if the key generation has problems then I will address that here.

I have not received a email from you.

[MOS-Marauder]

I sent u now a PM here.... (Former Mail went to neuron2@comcast.net)

Edit: Now it worked and Created License works fine with 2013.

Chris

[Guest]

OK, thanks. Glad you are up and running.

[tormento]

It always uses the first one.
The first one is needed from Autocad. Please, please, please add a feature to select card.
I wanted to get my new security in place before adding the elite features.
You were right. First of all you have to be paid for your efforts. :thanks:

[tormento]

2013 is not working for me. Tried to load a m2ts (as usual) both in x86 and in x64 but the window does not "resize" such as in previous versions and when trying to preview a "no video frame found" pops up.

The same m2ts works perfectly in 2012, both x86 and x64.

[MOS-Marauder]

2013 is not working for me. Tried to load a m2ts (as usual) both in x86 and in x64 but the window does not "resize" such as in previous versions and when trying to preview a "no video frame found" pops up.

The same m2ts works perfectly in 2012, both x86 and x64.


Iam currently Encoding a .ts file (720p/h264).

This is working fine... I could open and preview it.. Marked Cut Points and saved Project File. (64Bit Version)

Atm its encoding pass 1....

Chris

[tormento]

iam currently encoding a .ts file (720p/h264).
ts<>m2ts...

[Guest]

2013 is not working for me. Tried to load a m2ts (as usual) both in x86 and in x64 but the window does not "resize" such as in previous versions and when trying to preview a "no video frame found" pops up.

The same m2ts works perfectly in 2012, both x86 and x64. Read the release notes. That's what you get with an invalid license. Did you renew your license?

[Guest]

The first one is needed from Autocad. Please, please, please add a feature to select card. Added to the to-do list. Can you tell Autocad to use the second?

[Karyudo]

Adding [handling of DVR-MS and WTV HD streams from Windows Media Center] to the to-do list.

Whoo-hoo! Thanks. If only some of the other crap 'professional' software I am forced to use (mostly at work) was as so relentlessly improved in response to user input....

In my experience, there are few 'amateur' software projects that are as bulletproof or rigorously supported and updated as DGIndex, and I find it surprising and frankly disappointing that people still won't pay even a modest sum to support you in your efforts to give them the best possible experience.

[tormento]

Read the release notes. That's what you get with an invalid license. Did you renew your license?

Yes, I used the code you sent me in email the last time you changed the licence method. Is a new one necessary?

[tormento]

Added to the to-do list. Can you tell Autocad to use the second?
The second is a 8something I use for Physx. The first is a Quadro. Do you think I should use the second for Autocad? ;)

[tormento]

Ok, license problem solved. My knowledge of english is good enough to confuse licence with license.

[Guest]

In my experience, there are few 'amateur' software projects that are as bulletproof or rigorously supported and updated as DGIndex Thanks for the kind words. I'm glad you put amateur in quotes, because I am not an amateur. I've been a professional developer for 35 years. :)

[talen9]

Don, thanks for all the work you put into this project!

Just wanted to point it out that some parts of DGDecNV home page are obsolete...

Please be aware that until the system is automated I can process activations only twice a day, in the morning and evening, so be patient if your activation seems delayed.

Fact is, the process is now automated :p but the real problem is that from the home page there's no way to reach the online license generator (none that i was able to find, anyway) ... I only got there thanks to the link you posted here today in the v2013 announce.

[Karyudo]

Thanks for the kind words. I'm glad you put amateur in quotes, because I am not am amateur. I've been a professional developer for 35 years. :)

I didn't know for sure that you were a professional developer, nor for how long, but it's certainly clear that your work on DGIndex is 'amateur' only in the purest sense -- that you do it as something other than your main job, because you love it.

You don't know the countless times I've been frustrated by flaky operation of some piece of software or other and thought to myself, "Why couldn't there be a Donald Graft equivalent involved in this project?!"