Easy RealMedia ProducerV1.94 [Archive] - Page 7

View Full Version : Easy RealMedia ProducerV1.94

Pages : 1 2 3 4 5 6 [7]

martre

18th October 2007, 16:59

How do you use this to automatically encode one file after another...or does that process need to be done manually?

just select all with mouse then hit start

as the source file you simply add an avs.

Thanks a lot!

saluts

mankey

13th December 2007, 17:59

Sorry for being such a newbie now but... I always seem to get this kind of error immediately after starting my encode. Have tried with different files but all seem to be the same (except for a .rmvb file which started fine).

Error SDK Encoding 2007/12/08 19:39:14 0 Unable to set up encode. Your input source may contain an unsupported color format.

What is needed for encoding in this program?

I have XP2, CCCP codec pack, xvid, divx, avisynth... I've tried a lot of things. Have I missed anything cruicial? The files play fine in every media player I try. Plain AVI/xvid and such.

I've also tried encoding .rmvb with RealAnime5 but it won't work there either.

Thanks for any help : )

dvdfever

4th February 2008, 05:28

HI redcheek,

what do you suggest to convert rmvb files to avi/mpg. thanks

dvdfever

4th February 2008, 05:32

HI redcheek,

what software (preferably freewere) do you suggest to convert rmvb files to avi/mpg. thanks:)

Adub

4th February 2008, 07:30

Well, which is it?

Your title says convert to rmvb, but your post says convert to avi/mpg (which are very different, in case you didn't know).

The general rule of thumb is to use Avisynth with DirectshowSource and a RealVideo decoder, like Real Alternative. (http://www.videohelp.com/tools/Real_Alternative)

Then load the script into your favorite avi encoder (such as VirtualDub or MeGUI) or mpg encoder (such as HCenc) and press start!

piecemealcranky

12th February 2008, 06:03

Err.... Excuse me if I may but, anyone with the good saved settings for encoding a 25 minute anime episode with the best quality from an avi source file uploads theirs somewhere?

I'm just not getting too much idea on most of the settings even after using this for a whole years+...

Please assist. Thanks.

arjunas31

16th February 2008, 13:30

I am not able to convert .99GB VOB files... Everything else works fine

sosaited

21st March 2008, 07:05

Hi.
Thanks for the great software which makes encoding to rmvb so much easier.
I will be glad if someone could help me out with two problems I am having:

1. The brightness/Contrast of all the encoded rmvb files (I have tried 8,9,10) comes dark compared to the original one. In some scene's, it is unbearably dark. I played with the Colour settings to increase the values (even as high as 22) and Black level correction, but nothing fixes it, either just the brightness increases or both brightness and contrast are lower than original one. How can I fix it?

2. Whenever I try to encode a file larger than around 600 mb (from xvid), it just creates a 800kb file and finishes. Any suggestions to avoid this?

Thanks alot

karl_lillevold

21st March 2008, 16:58

sosaited

21st March 2008, 21:00

Hmm, the codec should preserve brightness / contrast. This sounds like an issue with playback. Perhaps the player you are using affects how the encoded video looks. It could be an overly issue on Windows. Which player are you using? Have you compared how it looks in different players?

I do not know what the filesize problem could be. Real (Helix) Producer should not have any problems with large input files on Windows. The output RMVB filesize is limited to 2GB.

Karl.

I've tried it on RealOne Player, Windows Media Player and Media player classic (RMVB files don't run on VLC on my computer, even though I've installed Real Alternative codec.) The effect is almost the same in all players.

And I haven't encoded with Helix Producer. Should I try with that? Is it free btw? I've tried to find tutorial or manuals for terms and settings for RMVB encodings, but couldn't find any. And FYI, I am encoding from XVID files.

Thanks

karl_lillevold

21st March 2008, 21:08

I am sorry I can not help much further. The codec does not change the brightness or contrast.

Either these are changed in the input path to the encoder, maybe another MPEG-4 DirectShow filter is being used to read/decode the file to Producer. The alternative is that brightness/contrast is changed at playback time of the resulting file.

You could always try one of the other free GUI frontends mentioned in this thread (http://forum.doom9.org/showthread.php?t=82042).

dvdfever

5th April 2008, 19:37

Hello Merlin7777,

Thanks for the direction to convert rmvb to avi/mpg. I haven't been able to frameserve a rmvb as a avs using AviSynth in FAVC . I keep getting the error message re:Couldn't find in E:\Docs and Settings\user\.......

JITDebugging using FAVC-v.1.06
-<configuration>
<system.windows form jit Debugging=true"/>
</configuration>

Please show me how do I go about using these command.Thanks:confused:

terradune

15th April 2008, 08:27

Hi there, got a prob with ERMP that I'm hoping someone can help me with.

When I hit the 'Start' button to convert files (.avi - haven't tried any other file type so far) it starts playing the audio of the file. At the end, the .rmvb output file is audioless. Also, if my video is 60 minutes long, that's how long it takes to convert it as well.

I have K-Lite Mega Codec Pack installed. However, when I tried uninstalling it ERMP wouldn't even work at all. The file it created (Kim Possible, 175MB) stopped at 3000KB.

I'm completely out of ideas, and running out of space on my HD. This is getting to be really annoying. Failing everything else, does anyone have an older version of ERMP? I don't recall the last one I had but it always worked fine before 1.94.

Thanks to anyone who can help!

L30N

5th May 2009, 09:10

I've been using ERMP v1.94 for a about 6 months now and I must say that this is one of the best realmedia producer. Sometimes there are a few videos (some .wmv) that won't convert but it rarely happens. Most video converters (commercial and freeware) consumes a lot of memory but what I like the most about ERMP is that its not a memory hogger :)

Hi there, got a prob with ERMP that I'm hoping someone can help me with.

When I hit the 'Start' button to convert files (.avi - haven't tried any other file type so far) it starts playing the audio of the file. At the end, the .rmvb output file is audioless. Also, if my video is 60 minutes long, that's how long it takes to convert it as well.

I have K-Lite Mega Codec Pack installed. However, when I tried uninstalling it ERMP wouldn't even work at all. The file it created (Kim Possible, 175MB) stopped at 3000KB.

I'm completely out of ideas, and running out of space on my HD. This is getting to be really annoying. Failing everything else, does anyone have an older version of ERMP? I don't recall the last one I had but it always worked fine before 1.94.

Thanks to anyone who can help!
@terradune: I encountered this before and I've found solution :)

1. Go to Start > Programs > K-Lite Codec Pack > Configuration > ffdshow audio decoder > DirectShow control

2. Check "Don't use ffdshow in:" and click "Edit..."

3. Click "Add", Browse to ERMP installation folder and select "Easy RealMedia Tools.exe"

4. Click all the "Ok" buttons and you're done :D

-------------
P.S. I know its an old thread but the software still works ;)

Ghitulescu

29th May 2009, 13:36

I do not know what makes people to encode in a rather unsupported format. There is only one player (Real Player) which is buggy, contains adware and ***** your system, because the competition is so weak.

But leaving this for a while, is it somehow, somewhere, anywhere, a RM decoder other than RealPlayerGold? Or plans?

29th May 2009, 15:16

But leaving this for a while, is it somehow, somewhere, anywhere, a RM decoder other than RealPlayerGold? Or plans?
FFmpeg/libavcodec has a RealVideo 9/10 (RV40) decoder (http://codecs.multimedia.cx/?cat=11) and it should also handle most of the RealAudio formats. So, try the latest MPlayer SVN or some other libavcodec-based player. Use SMPlayer if you need a GUI for MPlayer. Maybe ffdshow works too.

cholla

5th November 2010, 16:42

I know this is an old thread but it looked like the best place to get some information.
I can't get Easy RealMedia ProducerV1.94 to convert the Audio to vorbis . It works with all the other formats (that it is supposed to).
I have done the install with the programs own ogg decoder .This didn't work but interfered with the ogg codec from Xiph.Org
so I reinstalled that one.
So how do I get this program to convert the Audio to vorbis ?
My second problem is with Easy RealMedia EditorV1.73 .
When I try to combine the .rm files created from a full set of movie .vobs it fails.
The 6 .rm files average 85MB.
If I just do a couple of short clips from the same .vobs & convert these to .rm
with the same settings as the large .rm files were converted with the editor successfully combines them.
The only thing I can figure is there is a file size limit in the editor.
Any help for either will be appreciated.

Midzuki

5th November 2010, 17:41

^ @ cholla:

Just a "wild guess", but maybe the problem is "outside of ERMP" ? (on the operating system, for example --- aren't you running Windows Vista or Windows Seven ???)

OTOH, you might as well encode the audio to Vorbis with oggenc2, and later mux with MKVtoolnix (afaik, the RealMedia container does not support Vorbis).

karl_lillevold

5th November 2010, 17:47

When I try to combine the .rm files created from a full set of movie .vobs it fails.
The 6 .rm files average 85MB.

There should not be any problems with those file sizes (individual or combined). When the RM editor fails to combine RM files, it's almost always because they have somehow been encoded with incompatible parameters, or streams. It's rather difficult to figure out which, since it does not report what the problematic parameters are. Sorry I can not be of more help.

dadix

26th January 2012, 11:41

Hi, all. Please tell me how to use AviSynth and ERP together. What are the steps to follow?

aether

11th March 2012, 22:26

Hi there, first of all thanks for the software. I was wondering if anybody could help me with using ermp, I tried converting some avi files which it did but the quality is horrible regardless of the bitrate in the avi file or output settings, also everytime I try to covert another file type like vob it says error and stops converting. What am I doing wrong?

dadix

22nd June 2012, 07:28