Easy RealMedia ProducerV1.94

[killerhex]

anyone know good setting to encode with ERMP for a filesize of 70mb-85mb

[Liisachan]

New Rate Control (RC) aka "Elysian" would be the safest. Key points include:

- Video Codec = RealVideo 10
- Click [RV10/9 Settings...] and:
- Check "Use New Rate Control"
- Check "Use Two Pass" and Select "1st & 2nd"
- Check "Target Video Size" and input the number in KB
- Set "Source fps * 1000" as it should be (eg 23976)

Also, from my experience, I'd check "encodeAllFrames"
B Frames=3 should be ok

[posix]

as far as i know using the new rc automatically means "encode all frames", no?
just making sure.

[Liisachan]

as far as i know using the new rc automatically means "encode all frames", no?
just making sure.

karl_lillevold? :)

Honestly I'm not sure. While ago I got a bad result (frames dropped when they shouldnt be), and the movie got jumpy, without <encodeAllFrames type="bool">true</encodeAllFrames> but it might have been the DropDupe thing (which I now disabled too).

[Seraphic-]

Hi,

What is the difference between the audio code "RA 10 Plus" and "RealAudio 10"?

[Sirber]

encodeAllFrames only work with the old rate control. the new rc does not drop frames. the use of dropdupe is not recommended with both rate control, since with the old one, you can miss subtil mouth moves and it's useless with the new one.

[killerhex]

Hi,

What is the difference between the audio code "RA 10 Plus" and "RealAudio 10"?


its has a plus oh yea and good sound quality[AAC+]

[Seraphic-]

Ah, I see. Thanks for the reply

I have one other question. Does using the deinterlacing filter in this program degrade the overall quality of the video?

Thanks

[Sirber]

Does using the deinterlacing filter in this program degrade the overall quality of the video?
Yes, it does. it removes half the horizontal lines and makes the image blurier. Best use AVISynth for that, not producer.

[Seraphic-]

When you say use "AVISynth" do you mean in use it in "Easy RealMedia ProducerV1.94"?

[Sirber]

I have no clue about ERMP, I have clues about producer and avisynth ;)

[grss1982]

Hey I was just wondering would it be OK to install ERMP along with XP Codec Pack (http://www.xpcodecpack.com/).

Which should I install first ERMP then XP or the other way around.

BTW, I have ERMP 1.85 here. ;)

Thanks for any help, people. :D

EDIT:

I wanted to add that I'm currently using windows 98. If I had WinXP I would be thinking about codecs I would have installed the Detritus Player Pack in a heartbeat. :lol:

[fight2win]

is there any guide to help me with dvd to rmvb encoding?i wish to create an rmvb movie out of a dvd which is fully compatible with real player, can anyone help me?

[karl_lillevold]

Check out AutoRV10 in this thread:
http://forum.doom9.org/showthread.php?t=82042
It points to a guide for AutoRV10:
http://dark.pluridis.org/autorv10_guide/AutoRv10.htm

[banggendi]

hello!

im using ERMP v1.94 on win98 se P3 700 mhgz w/ 256 sdram
im almost re-encoded an anime episode for an hour an its good to me.

however when i try it to install to my new pc celeron d processor with 2.4 mhgz w/ 256 ddram with the same configuration i've got a faster re-encoding for just 10 minutes and the output is only audio and no video the audio last only for 10 minutes total file is mostly 10 mb.

anyone please help?

[banggendi]

forgot my OS is XP SP1

[Lemonadez]

Is there a mirror link :(? Site doesnt work for me...also when i dl it i only get 9bytes transfer....

[Seraphic-]

-----

[Seraphic-]

What is the difference between "New Rate Control" checked and undefined/grey checked?

[karl_lillevold]

checked: use New Rate Control (recommended)
undefined: default = Old Rate Control

[Seraphic-]

Hi karl,

One thing I found is that when it's "undefined" it uses a higher bitrate then if it's "checked". Most of the time, this seems to make the end video have higher quality.

Also, how will Real Video 11 compare to DivX, XviD, MPEG-2, MPEG-4, H.264, and X264 AVC? And is there any chance it will be optimized for video game encodes?

Last, I have a lot of highly complex raw avi's (deinterlaced correctly) that i've been testing with. If you ever what any of them to test with let me know. And I would be happy to use them to help test RealVideo 11 beta or something.

Thanks

[bananacreamandpeca]

I use ERM-Producer 194 and I got some questions



1.If I check the option 'shapest image' will this sharpen the source-video?
Or will it just try to maintain the sharpness of the source video (no additional shrpening will occur)?

2. If I wanted to sharpen the source-video using the avisynth feature
(if even nessecary if 'sharpest image' will aslo work)
What do I have to type in that avisynth-box under avisynth/more?

3. What does that option DropDup do?
Shall I leave it on when converting avis to rmvb or not?

4. I encoded some avis to rmvb and they seem to have very nice quality.
But now I have no sound???
I used ra10 96 stereo, but neither bsplayer or any other player plays back the sound..
I do have realaudio dlls installed (maybe they are old?)

5. What is the difference between choosing video: RealVideo 10 + EHQ mode,
and RealVideo 9 + EHQ mode?

Thanks for any helpfull comments ;)

It is great software, this ermp package. Very easy to use.
I just need to understand some of the settings thats all ;)
RMVB is pleasing to my eyes.

Keep it up redcheek!

[Lemonadez]

Also what is the command line of your AviSynth for Subtitle? I try putting a command line on avisynth but it does not even work at all -.- I left the computer for a night after that its still on 0% -.-

[killerhex]

lemonadez whats settings do you use for ERMP

[Lemonadez]

lemonadez whats settings do you use for ERMP

the default one? I just try this cuz it seems to be better quality for real media than realanime. I havent touch anything on settings except for avisynth. Since Easy RealMedia is build with it. But it does not even work at all :(

The command line with this seems to be different than the one I used for RealAnime.

[killerhex]

you use 2-pass right can you give me the settings you have for the RV10/9settings option

[tezeah]

there is something wrong with my ERMP (easy realmedia producer) v.1.94. when i do a conversion i only get the sound and the entire file comes out to only be about 11MB. i have already tried everything myself, to no avail. is there a way to fix this, i would appreciate any help. thanks for taking the time to read this message and any help you may provide. My operating system is XP, with 256Mb RAM, 2.0GHz and a 128Mb VGA card. This is the message in the producer log.


***********************************************************
*** 2006-11-17 19:35:15 New Session Start. Jobs:1 ***
---2006-11-17 19:35:15 Start Encode Job 1, (E:\D\- Bleach -\Anime\Bleach - 79.avi)->(E:\D\- Bleach -\Anime\Bleach - 79.rmvb)!
Warning File Reader 2006/11/17 19:35:19 8107 Neither uncompressed audio or video was available in DirectShow Reader
2006-11-17 19:35:28 Start Encode
Warning Audio Pre-filters 2006/11/17 19:35:29 3167 Stereo signal out-of-phase since 10 seconds.
2006-11-17 19:36:56 Encode Finished!
---2006-11-17 19:36:56 Job Encode Successed(E:\D\- Bleach -\Anime\Bleach - 79.rmvb)!
*** 2006-11-17 19:36:56 Session Finished. Finished:1,Success:1,Fail:0.
****************************************************

[killerhex]

see if the decoders are configured correctly or install or broken

[tezeah]

see if the decoders are configured correctly or install or broken

where do i check the decoders and how do i know if they are configured correctly or installed or broken. thanks for the reply i'm new to the program and need alot of help. again thanks for taking the time to read my message and replying. i really appreciate it.

[Tekoo]

At last i am able to post here!!

Okay i have been using ERMP for nearly over a month now... and advertising your software on quite some anime forums (not forgetting to give all credit to you guys)... i have even made a tutorial of how to use it. But you see most of the people using it at these forums are noobs to video conversion, including me when it comes to rmvb... I have some questions that needs to be answered, some are mind and some are from other members there! Quite some people are relying on my post!

1. What is better to use CBR or VBR, like which one will give out a better quality (i use CBR because i have total control on the output file size)?

2. Can i use this software to convert directly from MKV/OGM to RMVB, without having to convert it to AVI? (I normally use VDMod to convert to AVI then use ERMP to convert ro RMVB, which is tiring and endless)

3. I see that Vobsub comes with the software... is it possible to add external subs to the RMVB? If it is a command line... can you tell me what to write and where to write...

4. I have a 3.00GHz P4 and 512MB of RAM and it takes me 35 to 40 mins to convert a 25min ep... is it normal? can i reduce that conversion time. (settings used are around 375Kbps CBR, Sharpest Image, RealVideo 10 and the rest default)

I am really noob and i would really like some detailed info... thank you for helping me. Also best rmvb conversion software ever. RMVB has never been so pleasent to watch... 95% close to AVI quality... :D

[tezeah]

see if the decoders are configured correctly or install or broken

i dont understand, could you spell out the instructions because i'm still new to this programm and PC's in general. thanks.

[tezeah]

At last i am able to post here!!

Okay i have been using ERMP for nearly over a month now... and advertising your software on quite some anime forums (not forgetting to give all credit to you guys)... i have even made a tutorial of how to use it. But you see most of the people using it at these forums are noobs to video conversion, including me when it comes to rmvb... I have some questions that needs to be answered, some are mind and some are from other members there! Quite some people are relying on my post!

1. What is better to use CBR or VBR, like which one will give out a better quality (i use CBR because i have total control on the output file size)?

2. Can i use this software to convert directly from MKV/OGM to RMVB, without having to convert it to AVI? (I normally use VDMod to convert to AVI then use ERMP to convert ro RMVB, which is tiring and endless)

3. I see that Vobsub comes with the software... is it possible to add external subs to the RMVB? If it is a command line... can you tell me what to write and where to write...

4. I have a 3.00GHz P4 and 512MB of RAM and it takes me 35 to 40 mins to convert a 25min ep... is it normal? can i reduce that conversion time. (settings used are around 375Kbps CBR, Sharpest Image, RealVideo 10 and the rest default)

I am really noob and i would really like some detailed info... thank you for helping me. Also best rmvb conversion software ever. RMVB has never been so pleasent to watch... 95% close to AVI quality... :D

how did you get yours to work?
mine wont convert the pic and i only get 11mb of sound.

[joseph5]

i dont understand, could you spell out the instructions because i'm still new to this programm and PC's in general. thanks.

Render the files in GSpot.

[Tekoo]

can someone answer my questions please!? if it was already discussed somewhere or if there is a tut in the forum which would help me out, please give the link i'll do the rest... I already did my own search but couldn't find answers to my questions...

Please and thankz!
Sorry if all of my questions were already asked before...!

[tezeah]

thank you everyone for the assist. i finally got it working. now what settings would make it faster and give good quality?

[IceFiend]

Is there anyway to pause the encode rather than just aborting it all together?

[killerhex]

i believe this app has a pause button when you start encoding it becomes available

[karian]

People, I call Karian Santos ' and this is my first post in this forum, forgives which wants confusion that I have caused.

use the ERMP has a good time, but now I am only trying to go for the part most advanced of software, as I am Brazilian - yes, I love soccer - I still do not have a good English.

I wait to help in that it will be able to help galera here of the forum and since already I want to thank vocês for the attention.

I have two questions

Plugin has some to improve encoder of the ERMP

Where I can find a tutorial manual or that says the meanings to me of the options of button "RV10/9 setting…" a small description of each one of the options already is enough.

obs:the majority of link for pages, post, turorial, plugins of this topic stops backwards is broken.

Tekoo

[ cote]1.What is to better you uses CBR or VBR, like which one will give out to better quality (i uses CBR because i have total control on the output file size)[/quotes ]
I use the VBR because it better divides the size of the frames, preventing that a frame is with more kbps that the necessary one.

[ cote]2.Can i uses this software you convert directly from MKV/OGM you the RMVB, without having you convert it you the AVI(I normally uses VDMod you convert you the AVI then uses ERMP you convert ro RMVB, which is tiring and endless)[/cote ]

I do not know if it reads this extenção, but you can simulate false avi using the Avi-Wrapper.

[ cote]3. I see that Vobsub you eat with the software… is it possible you add eXternal subs you the RMVBIf it is command line… can you tell me what you the write and where you the write… [/cote ]

yes it can, the legends has to the same have name of the video for this.

[ cote]4.I have 3.00GHz P4 and 512MB of RAM and it takes me 35 you the 40 mins you convert 25min ep… is it normalcan i reduce that conversion teams (settings used ploughs around 375Kbps CBR, Sharpest Image, RealVideo 10 and the rest default) [/quotes ]

the quality of the archive is proportional to the quality, this says that you are placing much quality in the archive.
I go to pass two archives one with sufficient quality and another one that wheel rapid - it has led - in the PC, is enough to load using the button load.
http://rapidshare.com/files/5668636/70.85mb.emp.html

http://rapidshare.com/files/5669064/anime.emp.html

http://rapidshare.com/files/6541948/ed__PDD-Raw_GOD_SPEED_LOVE_SAMPLE_.rmvb.html
where I can obtain ones script to improve the quality of the colors in encoder

It would like that the excessively using ERMP cometasem it on these configurations.

[Tekoo]

ok thankz karian for answering all these question... you helped me for most but i still don't understand how to add external subs to my conversions?

Please can you explain it to me... i am totally noob to command line stuffs. Tell me the procedures to follow please and what has to be written... thankz... it's been over a month that i am trying to solve this problem...

Please please please, give me a solution.

[killerhex]

has further development of this app stopped

[posix]

seems so, unfortunately :(

i get a weird problem as of late.
encoding processes freeze at 99.9% and i have to manually kill the process :(

anyone else experience this? have solutions?

[reyak]

Hello, I just downloaded the new DivX version and now only one out of 20 or so movies will convert to RMVB. I didnt change anything else. There is no specific error, but all of the movies turn pink.

Any Ideas?

[Guzto-Jr]

Hello Doom9 Friends...

I'm Brazilian, new here and have questions about ERMP...

My English is not very good, but i hope you understand :-)

I don't get encoder vob to rmvb in ERMP. The software import the files, but dont encode, the progress bar stay stop in 0% and it doesn't go straight ahead. Exist updating for solve this?
What other software encode vob to rmvb with quality?

Thaks All

[tbj2doom]

Can i add or mix subtitle permanently in rmvb? How? Can ERM producer do it? If can How? Pls advice......TQ
:confused:

[mgh]

For subtitling rmvb (http://forum.doom9.org/showthread.php?s=&threadid=70829)

[tbj2doom]

im using realplayer to view my rmvb. I have a rmvb movie file and its subtitle. So my question is, how can i mix/add the subtitle file in the rmvb movie, so that, i can watch the movie without the subtitle file (when i delete it)?
Hope that that u understand. Pls advise....thks

[vipertongn]

How do you use this to automatically encode one file after another...or does that process need to be done manually?

[martre]

Hello,

This is the first open threat of realMedia Producer that ive found in a language that i can understand... keep good job doom9


my question is, how do i load avisynth script on ERMP? cant make it to work

is there a way of loadin a .AVS file so i dont have to type them on ERMP?




Thanks a lot for readin and hopefuly for answering
Saluts

[mgh]

im using realplayer to view my rmvb. I have a rmvb movie file and its subtitle. So my question is, how can i mix/add the subtitle file in the rmvb movie, so that, i can watch the movie without the subtitle file (when i delete it)?
Hope that that u understand. Pls advise....thks

see link in my post above yours:p

[posix]

how do i load avisynth script on ERMP?
as the source file you simply add an avs.