NuMenu4u.2.0.25

[TJeR]

I already had the 0.24 ver. but since I got it a long time ago and I don't know if ther were any diffference/improvment between the realese and mine I've downloaded it again and installed and I just got this error opening it


Procedure Name: SearchForFiles
Module Name: Folders_Types

Error Number: 6
Error Description: Overflow
Error Source: Project1
Error Line: 54
Call Stack:
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
TrimNull --> Folders_Types
SearchForFiles --> Folders_Types
GetFileCount --> Folders_Types
CheckLocation --> ReplacementFile
combo1_Click --> MainForm
sListAllDrives --> GlobalFunctions
Form_Activate --> MainForm



an iso image is loaded in the virtual drive "G:\", it is the same with the original disk. It starts right without any disc insrted, but crash as soon as I insert this one (original and / or iso image )the movie is "Scary Movie 3", and there is already a directory "D:\Scary_Movie_3", it doesnt happen with a another "fresh" disc, it is the same if I change the default path and numenu recreate the directory "Scary_Movie_3" for example in "C:\"

Regards

[wfn1]

What cce/muxman versions are we talking about?

I'm using cce 2.70.0.2 and muxman .17pr6. I switched to NM4U 2.0.24 and lowered the max bitrate to 7000 but still I get the same error (excessive bitrate/something went wrong) on the 7th asset so I'm thinking my source is damaged.

[Zeul]

@HolyChain
I need the mxp files please & numenu log file

[Angelus]

This isn't really a big problem but when the NuMenu4u update is downloaded from the website, the installation still says its for v. 2.0.23 instead of 2.0.24.

[Zeul]

Thanks Angelus - Corrected Now

[Digga]

also, as a sidenote, the hompage http://www.numenu4u.com/ still says the latest version is 2.0.22 and the latest entry is from 08/09/05 (a refresh didn't showed anything new). maybe a page update wouldn't hurt :)

[Zeul]

Page shows OK with me - latest version of 2.0.24

[Digga]

Page shows OK with me - latest version of 2.0.24I beg your pardon... there was an issue with my ISP. without proxy the page is just fine.

[SlipGun]

On a particular DVD during the RevPulldown process, the dvd2avi window simply stays open. This has happened on the same stream everytime I've tried. No encoding takes place if I close the window. What could be the problem?

[nickluck]

I have a problem: the entire re-encoding process doesn't start.
The log is unuseful. This is error report:

Procedure Name: BeginRoutines
Module Name: MainForm

Error Number: 13
Error Description: Type mismatch
Error Source: Project1
Error Line: 45
Call Stack:
DisplayVerInfo --> GlobalFunctions
BeginRoutines --> MainForm
ciax
Nico

[TuRiSOft]

I also get errors when trying to work within a folder rip (PGCDemux 1.2.0.5 used). It never reaches the end of demuxing. No issues working from ISO or Disc directly. If I go back to 2.0.23 no issues at all. No significant infos in .log . Would you like me to send collected info's ?

[wfn1]

@Zeul, Influenza:

The initial assumption that assets in vobid#7 are damaged is not correct. I tried multiplexing the original demuxed assets with muxman and they work just fine while the ones I encoded with CCE would error out every time. In my attemps to find the culprit I installed an older CCE version- 2.66.01.07 which exhibited the same behavior as CCE 2.70 and also Procoder 2.04/eclPro .52 which I could not make to work at all.

To make the long story short, the problem only occurs when multipass VBR is used in CCE. If I use OPV or CBR the whole process goes through smoothly. I'm happy with the fact that I can reduce a 700MB menu down to 250MB but I'm still curious as to what it is that gets broken in multipass... Anyone heard of anything alike?

[Zeul]

@nickluck
It appears that dvd decrypter is not installed - i parse the version to confirm that dvddec version installed will work - however, if the version = "" due to dvd dec not being there i can see where the error would have occured. Corrected now.

@slipgun
That normally occurs when numenu has told dvd2avi to open a file - but it doesn't exist. I thought i had covered every contingency - guess not :( Shoot me the logfile please.

@Turisoft
Is this on one particular disc or on several?

@wfn1
Never heard of that before. After double checking the ecl file you sent me the max is correct. All i can think is that numenu didn't recognise the cce version correctly and as such some paramaters in the ecl were incorrect for your version. To confirm this open up one of the ecl files manually in cce and then check what has been written as max bitrate. You could always save and then compare the 2 ecl files.

@HolyChain
I still haven't received the files.

[wfn1]

@zeul,
right now i'm only using cce 2.70.01.02 to avoid any unnecessary complications. all parameters are identical for that particular vobid and the max is always 9544. i think we have a cce related issue here so it's safe to say that not much can be done on your end.

[Zeul]

@wfn1
Thanks for the feedback.

[Master Yoda]

I was wondering if theres any plans for a asset removal option for scenarist users.

[TuRiSOft]

@Zeul
It happened with Batman Begins R2 Pal - with this title I also experienced this :
-w 2.0.24 and a folder rip it demuxes the same cell for all Vid/Cid , 2.0.23 works flawlessly (I took a look into the "DEMUXED" folder and found the same file with name changed for every cell of the menu) .

[SlipGun]

Sent the logfile, Zeul.

[Zeul]

@MasterYoda
Possibly in the future.

@Turisoft
OK i will review te code and see what i changed :D

@SlipGun
Reviewing now

[Zeul]

New Update released

[ron spencer]

if I donate $15 how long does it take to get a serial for VIP? Going away for weekend and just wanted to know.

Also, why for HC encoder does it look for HCbatch_15A only? V 16 is out should it not just look for HC_batch?

[D3s7]

normally it's the same day or next day however, Zeul is out of town for a few days.

Probably would not be till next week

[Diego2002]

Hi!

I have a problem with MenuIfoUpdate: the error message is Run-time error '53' - File not found.

First, there was a problem, with Scenarist script file, somehow one of the menu video track, has been imported as a slide show. When I tried to compile, Scenarist sad that the bitrate for a slide show (still picture) is too high. I corrected the script, so Scenarist imported now the video track correct, and the compile was successfull.

But after that, I run the UpdateMenuIfo, which gave back the error message above. This is the bat file:

"C:\Program Files\NuMenu4U\MenuIfoUpdate.exe" -batch_1 -input_I:\Tiesto\DVD_1\VIDEO_TS.IFO -root_I:\Menu
"C:\Program Files\NuMenu4U\MenuIfoUpdate.exe" -batch_1 -input_I:\Tiesto\DVD_1\VTS_01_0.IFO -root_I:\Menu

These ifo-s are there, as they had been decrypted by Decrypter in file mode. And my Working directory is I:\Menu, this contains now the following directories:

I:\Menu\Batch_1
I:\Menu\Batch_1\0\
I:\Menu\Batch_1\0\AUDIO_TS\
I:\Menu\Batch_1\0\VIDEO_TS\with Scenarist made ifos, bups, vobs
I:\Menu\Batch_1\mux_data\
I:\Menu\Batch_1\ScenaristScript30_1 Cache\
I:\Menu\Batch_1\ScenaristScript30_1 Cache\Encoded Files\
I:\Menu\D_VIDEO_TS\with many directories which made by Numenu of course
I:\Menu\D_VTS_01_0\
I:\Menu\VIDEO_TS\ this is empty

So I would like to know, which file or directory isn't on his place? How can I achive, that MenuIfoUpdate do one's work.

Very interesting, that if I choose numenu4u to work (I wanted to try), with original m2v (so without encoding), and leave scenarist to import then compile the menu, update_menu_ifo.bat gives no error, everything goes right. Of course, when numenu writes, that Creating scenarist script, after that i overwrite this script with my own, which is corrected (because of the fault of wrong import).

Sorry for my english, i learned it long-ago.

[Zeul]

The only reason for that error would be either the original ifos are not in the location specified or that the new scenarist files do not exist.

Th files that should exist are video_ts.ifo & video_ts.vob & vts_01_0.ifo & vts_01_0.vob in both directories.

[Diego2002]

What is the location, which MenuIfoUpdate check for the new scenarist files?

In this case, when my Update_Menu_Ifo.bat is?

"C:\Program Files\NuMenu4U\MenuIfoUpdate.exe" -batch_1 -input_I:\Tiesto\DVD_1\VIDEO_TS.IFO -root_I:\Menu
"C:\Program Files\NuMenu4U\MenuIfoUpdate.exe" -batch_1 -input_I:\Tiesto\DVD_1\VTS_01_0.IFO -root_I:\Menu

I have the new scenarist files in I:\Menu\Batch_1\0\VIDEO_TS\ dir.
The original files have not been moved or anithing else...

I resolved the problem actually, and with another dvd there isn't problem. But it is a bit weird.

I begun anyway to translate the language file to hungarian. It's so 40% ready :)

[Zeul]

I begun anyway to translate the language file to hungarian. It's so 40% ready :)

:thanks:

[rmtaibo]

BTW if you need some SPANISH HELP contact me!
I'd like to help...

[Zeul]

cool - the more language files the better

[Sir Didymus]

Hi Zeul...

I am not using your beautiful application on a systematic way, so forgive me if I am missing something obvious...

Anyway, when using NuMenu4u, I have been always happy with your last build 2.0.25...

...Until now, when facing with Spiderman R2 (the title was released something about 1 year ago or more...).

NuMenu launches Scenarist, which arrives up to the complete import of the menu scenario, after a while; then as soon as the muxing phase start, Scenarist stops with a brute error due to some too short timing among some highlights...

By doing some little search I realised that you did some specific improvement in NuMenu, exactely for coping with the complex usage of the highlights in this title...

So I suppose you have the title available to carry out some checks...

Please consider the issue is not urgent at all, and I would not steal your time from the beautiful development work you are doing with DvdPlanner...

Anyway, tell me if you need further information on the subject...

Cheers,
SD

[Zeul]

SD
check your e-mail :D

[Sir Didymus]

:thanks:

I will report back on the out comings...

SD

Edit: everything seems OK!!! I mean, the usage of multiple mxp scripts allows to properly rehauthor the title... I have to say the life, as a new VIP member of NuMenu4U, is much, much easier now... Your application, with the support of PgcDemux and MuxMan is now completely integrated with my set of DVD tools...

OK! I am really happy with this situation, so let me stop this bla, bla... It's time for me to push the "donate" button: even being late, I see your work need to be rewarded...

Bye!
:)

[salkku]

Hello and thanks for this great app ;)

Anyway, I noticed little bug that crashes the program..
If the default destination drive points to a non-existant partition, the prog will give an error and exit immediately...

[crys0000]

When I start numenu4u I immediately get this error:

Procedure Name: sListAllDrives
Module Name: GlobalFunctions

Error Number: 380
Error Description: Invalid property value
Error Source: Project1
Error Line: 42
Call Stack:
sListAllDrives --> GlobalFunctions
Form_Activate --> MainForm


When I click OK the program closes itself.

[D3s7]

zeul i believe is out of town for a few days.....

is there any numenu log file generated? If so it be helpful if you could post it

[AmbientMike]

Going back over my NTSC<->PAL guide
http://forum.doom9.org/showthread.php?p=672641
to try and refine it a bit I noticed that if a menu PGC is a dummy and also has a menu attribute to it such as Angle, PTT, Subpicture or Audio then when it compiles the DVD the PGC's go out of order which really messes up the navigation on the DVD. This seems to be because no actual dummy track is asigned to the PGC.

This is fixed manually by giving the PGC a dummy track and then remuxing it.

Any chance that dummy menu PGC's can be assigned dummy tracks automatically???


AmbientMike

[Zeul]

Empty PGCs with just a commandtable is perfectly legal so there is no need to add a dummy track

[AmbientMike]

Where it may be perfectly within DVD spec my point is that scenarist doesn't seem to recompile the project correctly (although it looks fine in the scenario editor) as the menus go out of order because their Cell ID's seem to get swapped if a dummy track isn't assigned to the empty PGC which is labelled as Angle, PTT, Subpicture or Audio.

If the menu cell ID's change then you can end up with a non-working menu system.

My test DVD for this was The Hills Have Eyes R1 NTSC

Unfortunately I no longer have the source DVD to post some screens of what happens...

[[Tobi]]

Is there a chance (not right now) to use also the CCE SP2 with NuMenu?

[Zeul]

perhaps 1 day

[[Tobi]]

I have noticed your post, but I didn't want to disturb you.
Before I buy the CCE SP2.....any news?

[Zeul]

At the moment i am fully commited to DVDPlanner and Numenu is on the backburner - so don't expect any updates any time soon.

[[Tobi]]

No problem, I can wait or smash also another way. ;)
By the way, the forum of the DVDPlanner was apparently hacked!!!

[effort_ac]

Full install inc 2.0.3 corrected now.