New eac3to GUI: HD-DVD/Blu-Ray Stream Extractor

[Sharc]

Still about the same.
Seems to depend on the disk - some BD folders work fine, for others the error pops up.
When clicking on an mpls the error may be like
<System.ArgumentOutOfRangeException>

[Greif]

Ok. Could you create a new issue and attach the log file?

Thanks.

[Sharc]

Here the log.
Actually when I click the error message away [continue], I can retry by clicking Feature(s) again, and everything works as expected.

[20:52:18] Retrieving features

[20:52:18] Arguments: "C:\Users\kok\Movies\BD BODY OF LIES"

[20:52:18] Feature Retrieval Completed

[20:52:18] Retrieving streams

[20:52:18] Arguments: "C:\Users\kok\Movies\BD BODY OF LIES" 1) -progressnumbers

[20:52:20] Stream Retrieval Completed

[Greif]

Open a command prompt and run the following:

[Path to eac3to] "C:\Users\kok\Movies\BD BODY OF LIES" 1) -progressnumbers

Could you copy what is shown in the command window and show it here?

Thanks.

[Sharc]

Translated into English, the response is:
The command ""C:\Users\kok\Movies\BD BODY OF LIES"" is either misspelled or could not be found.

[Greif]

Ok, here's how to do it:

1 - open up a command window by clicking Start and selecting Run. type cmd and press ENTER. A command window should now appear.

2 - go to your rip directory: cd "C:\Users\kok\Movies\BD BODY OF LIES" You should now be in that directory.

3 - retrieve the feature listing from that directory: C:\path\to\eac3to.exe .

4 - retrieve the stream listing from the first feature: C:\path\to\eac3to.exe . 1)

Copy the entire results and paste them here.

You must replace C:\path\to\eac3to.exe with the full path to wherever you have eac3to located.

Hope this helps.

[Sharc]

Sorry, my bad.
I guess this is what you are asking for:

1) 00100.mpls, 00000.m2ts, 2:08:18
- Chapters, 33 chapters
- VC-1, 1080p24 /1.001 (16:9)
- AC3, English, multi-channel, 48khz
- TrueHD, English, multi-channel, 48khz
- AC3, English, stereo, 48khz
- AC3, German, multi-channel, 48khz
- AC3, Italian, multi-channel, 48khz
- AC3, Spanish, multi-channel, 48khz
- AC3, English, stereo, 48khz


M2TS, 1 video track, 7 audio tracks, 14 subtitle tracks, 2:08:18, 24p /1.001
1: Chapters, 33 chapters
2: VC-1, 1080p24 /1.001 (16:9)
3: AC3, English, 5.1 channels, 640kbps, 48khz, dialnorm: -27dB
4: TrueHD/AC3, English, 5.1 channels, 48khz, dialnorm: -27dB
(embedded: AC3, 5.1 channels, 640kbps, 48khz, dialnorm: -27dB)
5: AC3 Surround, English, 2.0 channels, 192kbps, 48khz, dialnorm: -27dB
6: AC3, German, 5.1 channels, 448kbps, 48khz, dialnorm: -27dB
7: AC3, Italian, 5.1 channels, 448kbps, 48khz, dialnorm: -27dB
8: AC3, Spanish, 5.1 channels, 448kbps, 48khz, dialnorm: -27dB
9: AC3 Surround, English, 2.0 channels, 192kbps, 48khz, dialnorm: -27dB
10: Subtitle (PGS), English
11: Subtitle (PGS), German
12: Subtitle (PGS), German
13: Subtitle (PGS), Italian
14: Subtitle (PGS), Italian
15: Subtitle (PGS), Spanish
16: Subtitle (PGS), Dutch
17: Subtitle (PGS), Danish
18: Subtitle (PGS), Finnish
19: Subtitle (PGS), Norwegian
20: Subtitle (PGS), Swedish
21: Subtitle (PGS), German
22: Subtitle (PGS), Italian
23: Subtitle (PGS), Spanish

[hxall]

doesn't work for me, when loading an m2ts file, I get the following:

[17:14:30] Retrieving features
[17:14:30] Arguments: "C:\Movies\27 Dresses.m2ts"
[17:14:36] Feature Retrieval Completed
[17:23:46] Extracting streams
[17:23:46] Arguments: "C:\Movies\27 Dresses.m2ts" 1) 2:"C:\Movies\1_2_audio.ac3" -progressnumbers
[17:23:46] Error: HD DVD / Blu-Ray disc structure not found.
[17:23:46] Stream Extraction Completed

seems to still want the m2ts to be in a blu-ray disc structure, the above attempted to extract the DTS track from the m2ts file and convert it to AC3

[kurt]

same here:

[23:36:17] Retrieving features
[23:36:17] Arguments: "D:\Incoming\xxx_OF_SOLACE_F1\BDMV\STREAM\00013.m2ts"
[23:36:30] Feature Retrieval Completed
[23:36:49] Extracting streams
[23:36:49] Arguments: "D:\Incoming\xxx_OF_SOLACE_F1\BDMV\STREAM\00013.m2ts"
1) 3:"D:\Incoming\xxx_OF_SOLACE_F1\BDMV\STREAM\1_3_audio.dts" -core -progressnumbers
[23:36:51] Error: HD DVD / Blu-Ray disc structure not found.
[23:36:51] Stream Extraction Completed

[Greif]

Ok new svn build... try that...

I'm done for today. Time to go celebrate St Patty's Day ;)

[kurt]

retrieving features with new svn not working...

[09:00:12] Retrieving features
[09:00:12] Arguments: "D:\Incoming\xxx_OF_SOLACE_F1\BDMV\STREAM\00013.m2ts"
[09:00:12] Das Gerät ist nicht bereit (translation: device not ready)
[09:00:12] Feature Retrieval Completed

[Kurtnoise]

It's because Greif has forgotten to disable one line in the code...:)

> binary (http://www.mediafire.com/?njmyjhzzgwm)
> patch (http://pastebin.com/fa1093eb)

[tebasuna51]

Thanks Kurtnoise, now work with mkv files.
But audio file recode still don't work, only open the file but we can output nothing.

[Greif]

@tebasuna51: Right now, the tool is focused mostly on video containers (EVO, VOB, M2TS, MKV, etc). But I'll see about adding audio files as well.

wrt the last bug: doh! ;) I've uploaded a new version with the fix.

[Sharc]

Works fine now here. Thanks.

[hxall]

Works fine now here. Thanks.

same here, have tested it with both m2ts and mkv containers and was able to demux and convert DTS to AC3 without problems...

Greif, good job, thanks

[Greif]

If there are not objections I will be moving my branched code back into the trunk. So there will be stable release of 0.6 made available soon.

[hxall]

If there are not objections I will be moving my branched code back into the trunk. So there will be stable release of 0.6 made available soon.

no objections from me, but just a couple of suggestions for options (if you are looking for suggestions):

1) Link eac3to to tsMuxeR thru your GUI, that is, take for example a bluray rip with a True-HD soundtrack which I would want to convert to DTS, it would be great if you could demux the THD and convert to DTS (eac3to) and then remux back all thru your interface, and cleanup intermediate files as necessary

2) Same as above but linking eac3to to mkvmergeGUI, demux / convert / remux to mkv

[Greif]

@hxall: I don't see that happening with this tool. It's an extraction (and at most transcoding) tool.

Perhaps it could be chained through MeGui. That's where I would concentrate that effort.

[Furiousflea]

I'm getting this error....

[18:59:27] Retrieving features
[18:59:27] Arguments: "D:\Bluray\300____"
[18:59:27] Controls created on one thread cannot be parented to a control on a different thread.
[18:59:27] Feature Retrieval Completed

when opening ANY bluray source. Never used to get it with old versions.

[Greif]

interesting.... That's a new error, I'll have to inspect the code.

what OS & version of .net do you have installed?

[~bT~]

^ that error is in the unpatched build. try the svn (http://hdbrstreamextractor.googlecode.com/files/HdBrStreamExtractor_svn.zip)build.

[swaaye]

Why does it want to extract MPEG2 streams into MKV only? Can M2V or MPG be an option here?

edit: nevermind me. I was using an old version.

[saint-francis]

Small bug. If you keep the tool open and run several operations in a row, eventually the drop down boxes start to list the options multiple times.

http://i182.photobucket.com/albums/x270/saint-francis-photos/Untitled-4.jpg

[Greif]

@saint-francis: that's an easy fix. thanks for letting me know

I'll update the code and release a new version soon.

[Furiousflea]

interesting.... That's a new error, I'll have to inspect the code.

what OS & version of .net do you have installed?

Vista x64\.Net Framework 3.5 SP1

Cheers, :)

[lifespeed]

I love your interface to eac3to! It makes playing Blu-ray on PCs only a few mouse clicks. Without the MKV format (or a special soundcard) we don't get the good sound.

[kurt]

feature retrieving with *.ts files does not work. no stream list appear ...

[21:31:56] Retrieving features

[21:31:56] Arguments: "C:\Marc\casino_royale_sample.ts"

[21:32:23] TS, 1 video track, 1 audio track, 1 subtitle track, 0:00:59, 24p /1.001

[21:32:23] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index

[21:32:23] mscorlib

[21:32:23] bei System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)

[21:32:23] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index

[21:32:23] mscorlib

[21:32:23] bei System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)

[21:32:23] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index

[21:32:23] mscorlib

[21:32:23] bei System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)

[21:32:23] Feature Retrieval Completed


no problems with mkv files...

[kikker]

Thanks for your work on this project. There isn't a more elegant simple way to break up and save the streams on BD that I can find at least.

Is there a way in the options for the SUP streams to output the language as the name of the file, i.e. ENGLISH.sup, FRENCH.sup, etc.? Thanks!

[Greif]

Yes, I can add the language to the filename. I'll put it on the list.

[ACrowley]

Your Gui wont work anymore here

I get this Error too on some Files/Folders. Sometimes it works, sometimes not..

[10:10:18] Retrieving features
[10:10:19] Arguments: "C:\AV Tools\T E S T SAMPLES\Mpeg2_AVC TS\Eminem.TS.Mpeg2.Sample.ts"
[10:10:37] TS, 1 video track, 1 audio track, 1 subtitle track, 0:00:50, 60i /1.001
[10:10:37] "Eminem Live From New York City", Showtime 1 (ST1)
[10:10:37] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index
[10:10:38] mscorlib
[10:10:38] bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)
[10:10:38] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index
[10:10:38] mscorlib
[10:10:38] bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)
[10:10:38] Der Index lag außerhalb des Bereichs. Er muss nicht negativ und kleiner als die Auflistung sein.
Parametername: index
[10:10:38] mscorlib
[10:10:38] bei System.ThrowHelper.ThrowArgumentOutOfRangeException()
bei System.Collections.Generic.List`1.get_Item(Int32 index)
bei eac3toGUI.HdBrStreamExtractor.backgroundWorker_OutputDataReceived(Object sender, DataReceivedEventArgs e)
[10:10:39] Feature Retrieval Completed


I use Vista x64 SP1 with latest Updates /latest eac3to

Your Gui still cant use demuxed Audio Tracks ? i can load them correct and the eac3to Infos will appear, but your gui doesnt offer any conversion/option in the Features Window ?

[Greif]

Which type of files are you working with? The GUI doesn;t support audio files only video/container files.

[kikker]

Version 0.5 doesn't seem to parse the features of several m2ts files I have with the latest eac3to, but the latest SVN works perfectly.

[Greif]

I've been meaning to promote the svn release to 0.6. I'll do that soon. :D

[ACrowley]

Which type of files are you working with? The GUI doesn;t support audio files only video/container files.

TS /M2TS

will the Gui support Audio Files ? I mean this is imho a essential basic Feature of eacto to process single Audio Tracks :) ?

[Greif]

The focus of this GUI is for extracting streams from HD-DVD and Blue-Ray discs. I can look into adding audio file support but I can't promise anything.

[tedybear]

15:32:35] a02 The ArcSoft and Sonic decoders don't seem to work, will use libav instead.

how to use arcsoft decoder?

[~bT~]

^ :search:

[tedybear]

"making the ArcSoft DTS decoder work in eac3to:

Sometimes the ArcSoft DTS decoder doesn't work even after you've installed the full retail software. This can usually be fixed by manually adding the ArcSoft "Bin" folder (e.g. "C:\Program Files\Common Files\ArcSoft\Bin") to your environment path. If you don't know how to do this, google "environment path"."

can anyone please explain?

[rack04]

"making the ArcSoft DTS decoder work in eac3to:

Sometimes the ArcSoft DTS decoder doesn't work even after you've installed the full retail software. This can usually be fixed by manually adding the ArcSoft "Bin" folder (e.g. "C:\Program Files\Common Files\ArcSoft\Bin") to your environment path. If you don't know how to do this, google "environment path"."

can anyone please explain?

Explain what? How to install the full retail software? How to do a Google search?

[tedybear]

i did try google.....just arcsoft decoder.....

[kikker]

Just a question regarding the extraction of the chapter index for muxing into an MKV. It seems MKVmerge accepts only OGM or XML formatted chapter indexes. Would it be possible to have the chapter in one of these formats, or is this entirely reliant on eac3to's inability to do this?

I'm pretty sure that MKVmerge can take the text file created from your tool into the chapter editor and be saved, but it would save a step I think. Thanks...

[Greif]

Yeah, it's all eac3to. I'm just the pretty face ;)

[Mark_A_W]

"making the ArcSoft DTS decoder work in eac3to:

Sometimes the ArcSoft DTS decoder doesn't work even after you've installed the full retail software. This can usually be fixed by manually adding the ArcSoft "Bin" folder (e.g. "C:\Program Files\Common Files\ArcSoft\Bin") to your environment path. If you don't know how to do this, google "environment path"."

can anyone please explain?


If that doesn't work, then you need to register the Arcsoft HD audio decoder.

The easiest way is to install Radlight Filter Manager, hit Register, and fish through the Arcsoft folder in Program Files and find the decoder (.ax file).

The demo version works with eac3to and therefore stream extractor.

[rat_killer]

I run the stand alone version of your GUI and it works pretty darn well for extraction from mkv files. Is there any way to update the version of your GUI called by MeGUI so that it also can work with mkv files?

[Greif]

The MeGUI version should accept MKVs as well. When browsing for the file, the MKV file-type is not a selectable type but you can type *.mkv in the file name box and the MKV files should appear. I just tested it and it seems to work.

[rat_killer]

Cool! thanks for the tip!

[deado]

I seem to be having a problem with HDBrStreamExtractor (both SVN and old version), when trying to extract the main video to mkv, it extracts all the way to 100% but then has the error noise and there is no completed extracted file. It only works if I choose to extract it as h264 or VC-1 instead of mkv.

I've only had this problem recently, anyone else getting this? Maybe it's because of a recent AnyDVD update? That's the only thing I can think of.

[Greif]

Anything in the log file?

[deado]

Didn't see anything in the log for eac3to 3.15, rolled back to 3.14 and I then saw a Haali error. Did eac3to test, seems Haali splitter wasn't installed, something must have uninstalled it because it was installed, anyway all working now :)