BENCOS - Windows and Linux batch encoder GUI [Archive] - Page 9

jofori89

23rd February 2010, 14:44

what is a "graining audio function" ?

Sorry i wrong, regain audio, like amplydb() filter in avisynth

Sirber

23rd February 2010, 14:52

Sorry i wrong, regain audio, like amplydb() filter in avisynth

There is a "DRC" filter in HandBrake:

Apply extra dynamic range compression to the audio, making soft sounds louder.

Would that do it? I didn't try it yet.

exorcistas

11th May 2010, 03:39

Hi Sirber and was the only way to talk to the forum ticle is my first time and I'm dizatualizado about the information just to tell I wonder when will tar ready the new version of the Realanime Realanime7 that version 6 ja ta giving problem in almost all the videos from which fansub by ta dizatulizado when you will launch your website Detritus Software? And a site I used google to translate from Portuguese into English so that ja ta in English only to warn

Sirber

11th May 2010, 12:32

ok... I barely understood but I'm not currently working actively on bencos and realanime.
best to post here what issues you're having as it may not be the softwares but the sources themselves or your system.

exorcistas

11th May 2010, 16:28

The Sirber ta so is not having problem when I encode with realanime6 softsub videos with subtitles and I think so entrenched with hardsub videos in not getting so right ends encode encode video and leave all bad sound out of sync with the video and other problems and the size is also 50 mb out there is not why the fansub of them have updated their programs and realanime6 dizatualizado ta? one of the fansub that I can not encode the right is just to Anime no Sekai and before you know it was one that did not give me any trouble and realanime6 know when I encode the bar is like the% purcentos is get down on all issues 2, 3 sec every hour until the end of the encoder and I can only encode those videos with realanime6 now so after a time in the MeGUI encode! These are my problems. and I used the program to translate on google and you will not make a version of realanime7 not know when it will be ready?

Sirber

11th May 2010, 16:54

please, the translation through google is barely readable and gives me headaches. :(

this thread is about bencos, not realanime 6. you aren't supposed to get delays using the old realanime 6 or bencos. what is your source? in Bencos 20100130, load the problematic source in the "Files" tab, right click on it, select "Info", then paste here the content of the Info popup.

exorcistas

11th May 2010, 23:39

General
Complete name : F:\Videos de Fansubb\[#AnimeNSK]_Kiss_X_Sis_TV_-_05_[848x480_H264+AAC]_(03142E54).mkv
Format : Matroska
File size : 134 MiB
Duration : 24mn 27s
Overall bit rate : 765 Kbps
Encoded date : UTC 2010-05-10 18:59:06
Writing application : mkvmerge v2.9.8 ('C'est le bon') built on Aug 13 2009 12:49:06
Writing library : libebml v0.7.7 + libmatroska v0.8.1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 8 frames
Muxing mode : Container profile=Unknown@3.1
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 25s
Width : 848 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Progressive
Writing library : x264 core 94 r1583 7608d73
Encoding settings : cabac=1 / ref=8 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=9 / psy=1 / psy_rd=0.00:0.00 / mixed_ref=1 / me_range=8 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / weightp=2 / keyint=300 / keyint_min=30 / scenecut=40 / intra_refresh=0 / rc_lookahead=80 / rc=crf / mbtree=1 / crf=19.0 / qcomp=0.80 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:0.00
Language : English
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : Yes
Format settings, PS : No
Codec ID : A_AAC
Duration : 24mn 27s
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz
Menu
00:00:00.097 : en:00:00:00.097

exorcistas

11th May 2010, 23:43

It was this source that you always tava contends that the error in audio with Benco else cool comes out and I'll tell you how I clean the configuration of Benco audio, 32 + sterio | Full Flitering, resize 848x480, IVTC and everything High, 44kHz, | Qualiti Video: High, bitrate 380,
General: anime / toons, Container MPEG-4 Video Codec MPEG4 AVC Audio Codec AAC HE + PS
And it also happens with videos softsub and scored once encode law so that it had no sound and I do not use Track ID: Benco's got a problem and sorry for using the google translator it should not cause trouble and thanks for helping me e ai mostra como foi o video quando deu erro

C:\Arquivos de programas\Bencos\mplayer.exe "F:\Videos de Fansubb\[#AnimeNSK]_Kiss_X_Sis_TV_-_05_[848x480_H264+AAC]_(03142E54).mkv" -ass -font "C:\Arquivos de programas\Bencos\Arial.ttf" -subfont-text-scale 5

MPlayer Sherpya-SVN-r30075-4.2.5 (C) 2000-2009 MPlayer Team
getch2: 6 can't get number of input events [disabling console input]

Playing F:\Videos de Fansubb\[#AnimeNSK]_Kiss_X_Sis_TV_-_05_[848x480_H264+AAC]_(03142E54).mkv.
Matroska file format detected.
VIDEO: [avc1] 848x480 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Fontconfig error: Cannot load default config file
Unsupported PixelFormat -1
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
FAAD: compressed input bitrate missing, assuming 128kbit/s!
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [dsound] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO: [directx] 848x480 => 848x480 Planar YV12
Fontconfig failed to select a font. Trying without fontconfig...
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
Fontconfig failed to select a font. Trying without fontconfig...
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.

Exiting... (Quit)

Alex_080

12th May 2010, 00:58

Hi Sirber can you tell us when you release Bencos 2 and Realanime 7 ...please

Guest

12th May 2010, 01:18

@exorcistas

No fansubbing files allowed here. Read and follow our forum rules or strikes will follow. If you must reply do not do it in this thread; send me a PM.

@all

Do not respond to this issue.

Sirber

12th May 2010, 12:20

Hi Sirber can you tell us when you release Bencos 2 and Realanime 7 ...please

I can't say... I haven't played with Bencos2 for months (and longer for RA7). There's a lot going in my personal life and now the summer is here! :)

exorcistas

13th May 2010, 19:21

Sirber Hi I am having problem to encode the Benco and you told me to use the latest version of Bence 20100130 I put the version I was using was from 2009 but I switched and am having trouble to encode after analyzing the part of encode the error dis me the settings to encode in 2010 Benco what I have to change to get good quality equal to the realanime6 and you will not launch this year's version realanime to 7?

exorcistas

21st May 2010, 04:54

Sirber Hi I was wondering how to do one thing at Benco, I'm not getting that when I encode a video with subtitles softsub entrenched it encode the video and fas vicar in hardsub I wanted him to so encode the video and not also the captions to put together After the video the captions you know how I do it?

Sirber

21st May 2010, 12:34

per moderator request, I cannot help you with these issues. sorry.

exorcistas

21st May 2010, 19:37

Sirber Hi I was wondering one thing you will continue the program and make Realanime version 7 this year yet??

Sirber

21st May 2010, 21:35

Sirber Hi I was wondering one thing you will continue the program and make Realanime version 7 this year yet??

Bencos 2 will be ready before RealAnime 7, but since I'm not actively working on them....

exorcistas

22nd May 2010, 02:20

and what is this Benco two that will tar ta realanime7 ready before that I'm not very apar this? ...

exorcistas

22nd May 2010, 22:44

When will tar the ready in two Benco Sirber

exorcistas

23rd May 2010, 09:58

And I really like the program realanime so I was wondering when the new version comes out in July I found very useful the realanime Benco but I did not like very few have problems with the video in softsub that transforms the caption with the video and changes the shape of encode with subtitles when it will be for video and softsub why my operating systems and Windons in Sirber and it seems that is not the same picture quality when it leaves the video encode compared to realanime or print it so? I use the version of Benco 2010 would not have this problem if I USACE 2009 version of the problem together encode the caption if softsub a video?

exorcistas

24th May 2010, 02:55

Sirber Hi I was wondering when the Realanime version will be ready in July will tar tar that will ready this year though I have not got on with the Benco please answer my question of when the program Realanime Version 7 will tar prompt that I found realanime6 very useful to me! Please Respond

Sirber

24th May 2010, 03:01

jeez..............

MajorX

24th May 2010, 11:45

Yes Realanime 6 Bencos are best encoders so please Sirber .............:)

Shiznadnaz

29th May 2010, 05:41

Hey Sirber

I've been using Bencos for a while now but I'm having a strange problem now, it encodes the file but the output file is not there I searched my whole drive and couldnt find the encoded files anywhere, any ideas why this is?

flebber

30th May 2010, 06:37

I received an error when muxing to mp4. Video encoding and audio encoding were complete. This is the log, what else could I give to help you figure out error.

C:\Program Files\Bencos\MP4Box.exe -tmp "C:\DOCUME~1\Family\LOCALS~1\Temp/bencos/" -add C:\DOCUME~1\Family\LOCALS~1\Temp/bencos/video.264 -fps 3) -new ":\Rip\Produced\dvdout.mp4" -add "C:\DOCUME~1\Family\LOCALS~1\Temp/bencos/audio.mp4"

AVC-H264 import - frame size 640 x 480 at 3.000 FPS
Importing AVC-H264: | | Due to 99% completion there was no final file output either.

Fidelix

31st May 2010, 22:32

Well Sirber, i tried sending you an e-mail, but it seems your e-mail at detritus does not exist. Anyway, i'll just paste it here:

Hello Stéphane.

I am Fidelix from doom9 forums.
I would like to give you my complements about Realanime. It is my favorite x264 GUI.

Now the problem: I have a weekly necessity of encoding anime, and realanime uses old versions of available decoders and encoders, and this is generating some problems for some modern files for me.
mencoder and enhAacPlusEnc crashes some times, so i'm trying to create simple batch process for encoding my own files.

Favor:

Please, could you show me the command line settings that RealAnime uses for enhAacPlusEnc, mencoder and mplayer?
To be more specific, i would like to achieve the perfect quality RealAnime delivers, but i was never able using other GUIs, i guess this is my fault, but anyway...

I am sorry for asking you this in this manner, but i found no other way of contacting you.
I thank you already for reading this message, and i will respect if you decide not to show me the mencoder settings.

Regards,
Felipe Fidelix

exorcistas

3rd June 2010, 22:35

Sirber Hi I was wondering if you'll cast realanime July this year yet? I think the program realanime an encoder to encode very good anime please place this year yet

Eretria-chan

3rd June 2010, 22:38

It will be out when, and only when, Sirber decides to release it. Your nagging will only serve to annoy.
I think Sirber will tell us if he plans to release a new version. Until then, be patient. Nagging is bad practice on many forums.

exorcistas

7th June 2010, 01:57

Sirber Hi I was wondering if you have a forecast for the launch of Realanime7?

Eretria-chan

7th June 2010, 11:45

What did I just tell you? If Sirber has any information about a release he wants to divulge, he will do so. You replying here with all these infernal questions about when it will be released will only serve to annoy him.
Cut it out. Sirber will tell you/us when he feels like announcing something.

flebber

8th June 2010, 14:13

I can't say... I haven't played with Bencos2 for months (and longer for RA7). There's a lot going in my personal life and now the summer is here! :)

exorcistas! sirber has recently posted the above comment about development and progress, what more do you want?!

gambit7

12th June 2010, 08:22

I seem to be not able to encode any kind of video file

C:\DOCUME~1\H\LOCALS~1\Temp/bencos/video.264 -x264encopts deblock=0,0:bframes=2:frameref=2:threads=auto:b_pyramid=normal:nofast_pskip:nopsnr:bitrate=512:pass=1:turbo=2 -vf harddup

MEncoder dev-SVN-rUNKNOWN-4.1.1 (C) 2000-2006 MPlayer Team
CPU: AMD Sempron(tm) Processor 2600+ (Family: 15, Model: 44, Stepping: 2)
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Option x264encopts: Bad argument b_pyramid=normal
success: format: 0 data: 0x0 - 0xe067676
AVI file format detected.
VIDEO: [xvid] 640x480 24bpp 29.970 fps 1200.7 kbps (146.6 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [harddup]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar I420 as output csp (no 1)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
FATAL: Cannot initialize video driver.
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar I420 as output csp (no 1)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
FATAL: Cannot initialize video driver.

Exiting...

exorcistas

5th July 2010, 01:25

I was wondering when the Realanime7 will tar prompt that version 6 is not working anymore ta ta disatualizada and that can not encode more right? And I do not say is that your life is busy now that I know it must tar busy with life's problems and everything else but fans already almost 1 year that you did not launch the new version that you started doing it not ready divia tar Realanime that is an awesome program to encode anime why I'm insisting

exorcistas

13th July 2010, 02:48

Oi Sirber o Realanime6 quase não funciona mais da para tu fazer a versão 7 logo!! Onegaishimasu

Sirber

28th July 2010, 22:16

I received an error when muxing to mp4. Video encoding and audio encoding were complete. This is the log, what else could I give to help you figure out error.

Due to 99% completion there was no final file output either.

could be a MP4Box error/crash. What does bencos's log say?

Sirber

28th July 2010, 22:21

I seem to be not able to encode any kind of video file

C:\DOCUME~1\H\LOCALS~1\Temp/bencos/video.264 -x264encopts deblock=0,0:bframes=2:frameref=2:threads=auto:b_pyramid=normal:nofast_pskip:nopsnr:bitrate=512:pass=1:turbo=2 -vf harddup

MEncoder dev-SVN-rUNKNOWN-4.1.1 (C) 2000-2006 MPlayer Team
CPU: AMD Sempron(tm) Processor 2600+ (Family: 15, Model: 44, Stepping: 2)
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Option x264encopts: Bad argument b_pyramid=normal
success: format: 0 data: 0x0 - 0xe067676
AVI file format detected.
VIDEO: [xvid] 640x480 24bpp 29.970 fps 1200.7 kbps (146.6 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
Opening video filter: [harddup]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar I420 as output csp (no 1)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
FATAL: Cannot initialize video driver.
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar I420 as output csp (no 1)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
FATAL: Cannot initialize video driver.

Exiting...

MEncoder dev-SVN-rUNKNOWN-4.1.1 (C) 2000-2006 MPlayer Team

are you using the latest version of bencos?

Sirber

28th July 2010, 22:21

Hey Sirber

I've been using Bencos for a while now but I'm having a strange problem now, it encodes the file but the output file is not there I searched my whole drive and couldnt find the encoded files anywhere, any ideas why this is?

Was the output folder set correctly?

Sirber

28th July 2010, 22:26

jeez..............

and what is this Benco two that will tar ta realanime7 ready before that I'm not very apar this? ...

When will tar the ready in two Benco Sirber

Sirber Hi I was wondering when the Realanime version will be ready in July will tar tar that will ready this year though I have not got on with the Benco please answer my question of when the program Realanime Version 7 will tar prompt that I found realanime6 very useful to me! Please Respond

Sirber Hi I was wondering if you have a forecast for the launch of Realanime7?

I was wondering when the Realanime7 will tar prompt that version 6 is not working anymore ta ta disatualizada and that can not encode more right? And I do not say is that your life is busy now that I know it must tar busy with life's problems and everything else but fans already almost 1 year that you did not launch the new version that you started doing it not ready divia tar Realanime that is an awesome program to encode anime why I'm insisting

Oi Sirber o Realanime6 quase não funciona mais da para tu fazer a versão 7 logo!! Onegaishimasu

I reported you and now I'm blocking you. :mad:

Sirber

28th July 2010, 22:30

Well Sirber, i tried sending you an e-mail, but it seems your e-mail at detritus does not exist. Anyway, i'll just paste it here:

it does exists, maybe it got in spam and I didn't notice it.

RealAnime 6 is outdated. Please use the latest bencos.

as seen on http://www.detritus.qc.ca/:
Status:
Latest release is almost 2 years old and probably outdated. Updating mencoder will break RealAnime 6 since x264 flags changed in recent mencoder releases. I strongly suggest you use Bencos instead. The next version, RealAnime 7, is currently in early development.

... make it 3 years :)

you can get the current latest build of bencos here:
http://code.google.com/p/bencos/downloads/detail?name=BENCOS_20100130-2.exe

ckmox

30th July 2010, 03:23

@Sirber

will you update bencos? can you make a compress archive (zip/7-zip) only for portability purposes? because dont want much to install software now a days
and if possible please dont use .Net base programming on this because true compiled languages are the real win :)

EDIT:

i downloaded the source file http://code.google.com/p/bencos/downloads/detail?name=bencos_src_20100130.7z
i made a very minor tweak on the settings of bencos on psy-rd and aq-strength i set them both to 0.6
here is where i change the code

// Profiles (slow!)
case cboVQuality.ItemIndex of
0: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=hex:partitions=all:subq=7:psy_rd=0.6,0.0:aq-strength=0.6 ';
1: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=umh:partitions=all:subq=8:trellis=1:psy_rd=0.6,0.0:aq-strength=0.6 ';
2: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=umh:partitions=all:subq=9:trellis=2:psy_rd=0.6,0.0:aq-strength=0.6 ';
end;

also i changed the resolution (Resize) item lists to 512x384 for 4:3 and 640x360 for 16:9 and made the Resize checbox checked property to true

im totally noob in programming and commandline of encoding i just want to atleast tweak this settings for anime intention
but i got a problem on that source file of bencos and that i cant encode audio with it so can i ask you
is their some missing code on the audio section of that source file of bencos?

this is the tweak bencos
http://www.mediafire.com/?kxazdum6hxms95d

Sirber

30th July 2010, 12:49

@Sirber

will you update bencos? can you make a compress archive (zip/7-zip) only for portability purposes? because dont want much to install software now a days
and if possible please dont use .Net base programming on this because true compiled languages are the real win :)

it's in FreePascal, using the Lazarus IDE. I'm in the process of creating the v2, changing mencoder to handbrake. I used 7z because google site doesn't like .exe. Bencos is released as an installer. if you don't want to install it, you can extract it with 7zip (the nsis installer).

EDIT:

i downloaded the source file http://code.google.com/p/bencos/downloads/detail?name=bencos_src_20100130.7z
i made a very minor tweak on the settings of bencos on psy-rd and aq-strength i set them both to 0.6
here is where i change the code

// Profiles (slow!)
case cboVQuality.ItemIndex of
0: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=hex:partitions=all:subq=7:psy_rd=0.6,0.0:aq-strength=0.6 ';
1: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=umh:partitions=all:subq=8:trellis=1:psy_rd=0.6,0.0:aq-strength=0.6 ';
2: sV2 := sV + sOptTmp + ':pass=2:8x8dct:weight_b:mixed_refs:me=umh:partitions=all:subq=9:trellis=2:psy_rd=0.6,0.0:aq-strength=0.6 ';
end;

also i changed the resolution (Resize) item lists to 512x384 for 4:3 and 640x360 for 16:9 and made the Resize checbox checked property to true

im totally noob in programming and commandline of encoding i just want to atleast tweak this settings for anime intention
but i got a problem on that source file of bencos and that i cant encode audio with it so can i ask you
is their some missing code on the audio section of that source file of bencos?

this is the tweak bencos
http://www.mediafire.com/?kxazdum6hxms95d

try "slow audio extraction". mplayer has difficulties extracting the WAV from the source sometimes.

I'll look at the tweaks and release a new version.

ckmox

30th July 2010, 13:29

@Sirber

ok ill try extracting the installer using 7-zip because i find installers now a days bothersome lol

and ye i know its in Lazarus (Freepascal) im just hoping that youll continue to program BENCOS on this and not in .Net

and about the tweaks i made ye do take a look at them and ill test out the "slow audio extraction" option
but audio encoding works in this installer though http://code.google.com/p/bencos/downloads/detail?name=BENCOS_20100130-2.exe
so i guess that the source code have some problem? but anyway ill look into it more and hope my brain will not blow

Sirber

30th July 2010, 13:37

the source code is missing all the needed cmdline apps :)

ckmox

30th July 2010, 13:52

ye but i compiled it in Lazarus (Ctrl+F9) then replace the bencos.exe that i got from the compilation onto the directory that has all the commandline apps so its working
and i think i found out the error on the source code its about chkASlowExtract

this is the only code i found about this variable

if (chkASlowExtract.Checked = false) then
sA1 := sA1 + ' -vc null'; // fails with AAC audio

but how about when chkSlowExtract.Checked = true where is the code for this?

Sirber

30th July 2010, 14:01

i think i found out the error on the source code its about chkASlowExtract

this is the only code i found about this variable

but how about when chkSlowExtract.Checked = true where is the code for this?

the checkbox is only used when it's not checked :)

ckmox

30th July 2010, 14:09

ah ok so there maybe something wrong with the source code because i compiled the source code and use it and the video encoding finishes and muxing too but it has no audio

but in the other hand this installer your provide http://code.google.com/p/bencos/downloads/detail?name=BENCOS_20100130-2.exe with "slow audio extraction" checked finishes the encoding with audio too

Sirber

30th July 2010, 14:14

mmmm I used that sourcecode for the latest installer.. :scared:

ckmox

30th July 2010, 14:20

lol thats odd ok if i dont fix the audio encoding problem with my limited knowledge ill just wait for your own update :)

Sirber

1st September 2010, 18:34

I'm testing the new webm codec on anime and it's quite good!.. well a bit less than x264 :)
I'm also testing ffmpeg (win32) to see if it would be good instead of mencoder.

edit

WebM:
ffmpeg.exe -i E002.avi -threads 4 -pass 1 -passlogfile out.webm -b 368k -g 120 -qmax 63 -ab 32 -y out.webm
ffmpeg.exe -i E002.avi -threads 4 -pass 2 -passlogfile out.webm -b 368k -g 120 -qmax 63 -ab 32 -y out.webm

x264:
ffmpeg.exe -i E002.avi -threads 4 -pass 1 -vcodec libx264 -b 368k -passlogfile out.mp4 -fpre presets/libx264-veryslow_firstpass.ffpreset -y out.mp4
ffmpeg.exe -i E002.avi -threads 4 -pass 2 -vcodec libx264 -b 368k -passlogfile out.mp4 -fpre presets/libx264-veryslow.ffpreset -y out.mp4

http://ext.detritus.qc.ca/tmp/webm/

Sirber

21st September 2010, 13:09

I found a way to have the softsubs in the output:

ffmpeg.exe -i E01.mkv -threads 4 -vcodec libx264 -scodec copy -slang eng -b 368k -fpre presets/libx264-normal.ffpreset -an -y out_sub.mkv
ffmpeg.exe -i E01.mkv -threads 4 -vn -sn -acodec pcm_s16le -alang jpn -y out_aud.wav
neroAacEnc.exe -2pass -br 32000 -if out_aud.wav -of out_aud.m4a
ffmpeg.exe -i out_sub.mkv -i out_aud.m4a -vcodec copy -acodec copy -scodec copy -y out_sub_aud.mkv

but I cannot convert every source (like malformed avi/bframe sources). container must be mkv (mp4 don't support .ass), video codec could be vp8..

ckmox

29th September 2010, 16:21

is ffmpeg reliable on muxing? i encoded a h264 mkv file and encoded the video part using x264 (o1.mkv) and then the audio (o.ogg) through ffmpeg libvorbis but when i mux them with this command line
ffmpeg -i o1.mkv -i o.ogg -vcodec copy -acodec copy -y vid_aud_out.mkv
i got video that stops and suddenly jumps but the audio still running using MPC-HC
but when i mux them through mkvmergeGUI the file is fine when i play it though MPC-HC