Eac3to and More GUI [Archive] - Page 4

Yraen

1st June 2008, 00:15

Eac3to and More GUI v 1.09 b3 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 3
- added subtitles to tsMuxer tab
- reduced the amount of memory the gui uses
- minor tweaks

Subtitles for tsmuxer are added as source files or demuxed with eac3to and queued in the batch. Since most of them will be srt files, add them as source files on the paths/sources tab.

There might be a problem with subs, I don't know. It seems that the command line for tsmuxer wants the charset of the font, and using autoit I can't seem to find out what the charset is. Right now it defaults all fonts to DEFAULT_CHARSET, which according to microsoft:

Note that DEFAULT_CHARSET is not a real charset; rather, it is a constant akin to NULL that means "show characters in whatever charsets are available."

So here's hoping it works okay. If needed, I've got a disabled button there that can be activated to allow the user to change the charset, but I hope it doesn't come to that.

The memory usage tweak looks real good. I've been bothered by how much memory the gui took from the beginning, and just recently found a way to lower it.

Momber

1st June 2008, 10:18

- added subtitles to tsMuxer tab
Sounds great. Can't wait to try it.

- reduced the amount of memory the gui uses
That's always welcome.

Thanks a bunch!
S.

EPiPH0NE

1st June 2008, 18:23

Eac3to and More GUI v 1.09 b3 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 3
- added subtitles to tsMuxer tab
- reduced the amount of memory the gui uses
- minor tweaks

Subtitles for tsmuxer are added as source files or demuxed with eac3to and queued in the batch. Since most of them will be srt files, add them as source files on the paths/sources tab.

There might be a problem with subs, I don't know. It seems that the command line for tsmuxer wants the charset of the font, and using autoit I can't seem to find out what the charset is. Right now it defaults all fonts to DEFAULT_CHARSET, which according to microsoft:

So here's hoping it works okay. If needed, I've got a disabled button there that can be activated to allow the user to change the charset, but I hope it doesn't come to that.

The memory usage tweak looks real good. I've been bothered by how much memory the gui took from the beginning, and just recently found a way to lower it.

The GUI is not letting me add the path to tsMuxeR. I always delete the previous version and it's INI before using a new one. Am I doing something wrong?

EDIT:

Seems to work fine now after shutting it down and restarting. Don't know what that was about.

Yraen

1st June 2008, 18:36

The GUI is not letting me add the path to tsMuxeR. I always delete the previous version and it's INI before using a new one. Am I doing something wrong?

EDIT:

Seems to work fine now after shutting it down and restarting. Don't know what that was about.

oops...

It was a bug in the code. I had it fixed in 1.10 (which I'm working on) and forgot to transfer it back to 1.09 when I found it. This bug only applied itself the first time you set up tsmuxer, once starting the gui again all is correct. New version (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/) is up and fixes that bug.

You don't have to delete the .ini if you don't want to. I only add to it, never remove anything.

EPiPH0NE

2nd June 2008, 00:38

kurt

2nd June 2008, 21:47

Got into some trouble here: I just want to load some audiotracks as source files and convert them subsequently to ac3. some are in the same folder, some don't but the option "apply these settings to all source files..." is not working then. It seems eac3to wants to merge the audiotracks which are in the same folder?

Yraen

2nd June 2008, 23:50

^^^^LOL.........And I thought I did something wrong. Well, thanks for fixing it :) I always delete the INI just to be safe. I'm like that. Is it just me or is d/ling from Yahoo incredibly slow these days?
No idea, I don't download from there. :p

Got into some trouble here: I just want to load some audiotracks as source files and convert them subsequently to ac3. some are in the same folder, some don't but the option "apply these settings to all source files..." is not working then. It seems eac3to wants to merge the audiotracks which are in the same folder?

In 1.10 I'm going to remove the automatically linking of files in the same folder. It seems I broke that in one of the recent "fixes". I'll find the problem and get a fix up later today/tomorrow. Fix is up, Eac3to and More GUI v 1.09 b5 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/).

Here's a question for everyone. Do you prefer the source file selection the way it is or would you prefer something like this? (http://farm3.static.flickr.com/2174/2545751747_ab8a40998e_o.jpg)

In the photo is both ways, I could leave both ways in or get rid of one. I'm prefering the check boxes if I can get them to behave the way I want them to.

EPiPH0NE

3rd June 2008, 03:50

No idea, I don't download from there. :p

Yeah, but you host your app there and since about 2 releases ago I get like 2.7k/s D/L when getting your app. It shouldn't take me 2 mins to D/L 557kb.

EDIT:

I just got a whopping 10k/s :P

kurt

3rd June 2008, 06:30

In 1.10 I'm going to remove the automatically linking of files in the same folder. It seems I broke that in one of the recent "fixes". I'll find the problem and get a fix up later today/tomorrow. Fix is up, Eac3to and More GUI v 1.09 b5 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/).

Here's a question for everyone. Do you prefer the source file selection the way it is or would you prefer something like this? (http://farm3.static.flickr.com/2174/2545751747_ab8a40998e_o.jpg)

In the photo is both ways, I could leave both ways in or get rid of one. I'm prefering the check boxes if I can get them to behave the way I want them to.
thx for the working fix!

And I would also prefer checkboxes :)

Yraen

3rd June 2008, 10:20

Yeah, but you host your app there and since about 2 releases ago I get like 2.7k/s D/L when getting your app. It shouldn't take me 2 mins to D/L 557kb.

EDIT:

I just got a whopping 10k/s :P

My ISP gives me space and stuff on Yahoo instead of using their servers. If you know of a better place to host it, that won't change the link every time I upload, let me know and I'll mirror it there.

B4tm4n

3rd June 2008, 10:27

My ISP gives me space and stuff on Yahoo instead of using their servers. If you know of a better place to host it, that won't change the link every time I upload, let me know and I'll mirror it there.

I use http://www.divshare.com to host stuff.

Yraen

3rd June 2008, 23:48

Unfortunately that's what I want to stay away from, a link that changes every time I upload a file. I'd be editing the link(s) all the time instead of just supplyign the yahoo address.

EPiPH0NE

4th June 2008, 01:13

Unfortunately that's what I want to stay away from, a link that changes every time I upload a file. I'd be editing the link(s) all the time instead of just supplyign the yahoo address.

Just stick with Yahoo it's not a big deal, I just like to bitch cause I'm sick and can't smoke right now :p

saint-francis

5th June 2008, 23:42

With the latest version the setting to re run the process if a gaps/overlap file is detected isn't working for batch processing. I don't know if it works for a single process since I have only tried batch processing with the latest version. Oddly when I set this option in the preferences tab it doesn't show up as checked automatically in the audio and video tabs. I noticed this and checked it manually and it still didn't work.

Yraen

7th June 2008, 00:11

Long hours at work this week. I'll try to get time early next week to look into it.

picman1

11th June 2008, 00:12

Hi, Being new to the forum and to this great gui. I have in the past used Tsremux to demux the audi track ie TrueHd from a movie run it through eac3to to create an lpcm file and then through Pcm2Tsmu to create an lpcm file that would work with TsMuxer. At this point in TsMuxer I would input the lpcm file for the audio file and the m2ts file of the decripted movie and select the video file from the m2ts file and the audio from the eac3to lpcm I created and finally output a .ts file that would stream to my PS3 and would play great. My question is this: How would I do this with this gui? I see how to create the lpcm audio file using the eac3to audio tab and then create the stdout lpcm using the eac3to stdout tab but in the TSmuxer tab I don't see where I can select a video track from a m2ts file and mux it together eith the newly created lpcm file. Either I don't understand the TsMuxer tab or something is missing. Please help. This tool looks like it could be the all in one tool I have been looking for to create a streamable Blu-ray file. Thank you

Yraen

11th June 2008, 10:01

There's a lot missing from both the Mkvmerge and tsMuxer tabs. This was never meant to even compete with the functionality those guis have. It was meant to bring the basics to work with eac3to in a batch queue mode.

As of right now, the only way you can get the video over to tsMuxeR is to demux it with eac3to at the same time you're getting the audio.

picman1

11th June 2008, 11:19

Oh. ok. I didn't know if more funtionality was going to be added for tsMuxer. I don't usually dmux the video. Once I create the lpcm file as I described above I add the entire m2ts movie file and the lpcm file within tsMuxer and select the video track from the m2ts file and the lpcm track and mux them to a ts file. If that can't be done in the gui I can do it outside as well. The gui is still great for creating the lpcm in one tool. Thank you.

Yraen, Just as a follow up do you think this could be an added future function for the tsMuxer tab?

Thank you.

gigah72

18th June 2008, 15:23

on the video tab are under extras 2 checkboxes for muxing into movie.mkv and passthru to vc1conv, but both have no function. is this going to change or how to change the cmd-line to do so manually?
also the checkbox under video options for demuxing 1st video and all audio has no function?
i'm quite an newbie to all this hd-dvd stuff, so please excuse strange questions.

Yraen

19th June 2008, 02:37

Yraen, Just as a follow up do you think this could be an added future function for the tsMuxer tab?

We'll see what comes after I finish 1.10. It's got some changes in it that I like. And it probably would make supporting multiple tracks in tsMuxer easier.

on the video tab are under extras 2 checkboxes for muxing into movie.mkv and passthru to vc1conv, but both have no function. is this going to change or how to change the cmd-line to do so manually?
also the checkbox under video options for demuxing 1st video and all audio has no function?
i'm quite an newbie to all this hd-dvd stuff, so please excuse strange questions.

That probably broke at the same time that the gaps detection broke. Hopefully I'll get the time this weekend to fix it. And work on 1.10 some more. There's nothing that can be changed in the command line to fix it, that was all done internally in the gui, calling vc1conv/mkvmerge after eac3to and passing the names to them.

Thanks for letting me know about that and the -demux not working. I'll try to get the fixes out this weekend.

Yraen

22nd June 2008, 01:10

Eac3to and More GUI 1.09 b 6 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 6
- Fixed -demux switch
- Fixed "Mux command line into Movie.mkv"
- Fixed gaps file detection

All of that should be fixed now. It worked in the test cases I had set up and ran throughout today. Sorry I broke it while moving the code to 1.10 everyone.

EPiPH0NE

25th June 2008, 03:14

Eac3to and More GUI 1.09 b 6 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 6
- Fixed gaps file detection

I just ran Close Encounters BluRay through Eac3to_And_More_GUI v1.09b6 + eac3to v2.48 with gaps detection enabled and this was my log:

eac3to v2.48
command line: "P:\eac3to_2.48\eac3to.exe" "L:\MOVIE_TEMP\Close.Encounters.of.the.3rd.Kind.BluRay\CE3K\BDMV\STREAM\" 1) 2: "L:\MOVIE_TEMP\Close.Encounters.of.the.3rd.Kind.BluRay\WORK\VIdeo.mkv" 6: "stdout.pcm"
------------------------------------------------------------------------------
M2TS, 1 video track, 4 audio tracks, 2:17:13
1: Chapters, 20 chapters
2: h264/AVC, 1080p24 /1.001 (16:9)
3: AC3, Spanish, 5.1 channels, 448kbit/s, 48khz, dialnorm: -29dB
4: TrueHD/AC3, English, 5.1 channels, 48khz
5: TrueHD/AC3, French, 5.1 channels, 48khz
6: DTS Master Audio, English, 5.1 channels, 24 bits, 48khz
[v02] Extracting video track number 2...
[a06] Extracting audio track number 6...
[a06] Decoding with DirectShow (Sonic Audio Decoder)...
[v02] Muxing video to Matroska...
[a06] DirectShow reports 5.1 channels, 24 bits, 48khz
[a06] Swapping endian...
[a06] Remapping channels...
[a06] Creating file "stdout.pcm"...
[a06] Audio overlaps for 7ms at playtime 0:23:06.
[a06] Audio overlaps for 6ms at playtime 0:26:06.
[a06] Audio overlaps for 11ms at playtime 0:30:37.
[a06] Audio overlaps for 6ms at playtime 0:34:03.
[a06] Audio overlaps for 6ms at playtime 0:37:20.
[a06] Audio overlaps for 7ms at playtime 0:41:25.
[a06] Audio overlaps for 13ms at playtime 0:45:19.
[a06] Audio overlaps for 9ms at playtime 0:58:47.
[a06] Audio overlaps for 12ms at playtime 1:03:58.
[a06] Audio overlaps for 6ms at playtime 1:04:39.
[a06] Audio overlaps for 8ms at playtime 1:13:48.
[a06] Audio overlaps for 10ms at playtime 1:15:44.
[a06] Audio overlaps for 6ms at playtime 1:16:41.
[a06] Audio overlaps for 5ms at playtime 1:20:28.
[a06] Audio overlaps for 9ms at playtime 1:21:15.
[a06] Audio overlaps for 9ms at playtime 1:34:00.
[a06] Audio overlaps for 9ms at playtime 1:34:34.
[a06] Audio overlaps for 10ms at playtime 2:11:04.
[a06] The audio file was demuxed without making use of the gap/overlap information.
[a06] Please rerun the same eac3to command line. That will correct the gaps/overlaps.
Added fps value to MKV header.
Video track 2 contains 197424 frames.
eac3to processing took 2 hours, 11 minutes.
Done.

I don't see where it says it re-ran the command line to use the gaps file. Or does it not tell you?

Yraen

25th June 2008, 03:32

The eac3to log would say that it reran it with the gaps file. I'll dig into the code and ensure it runs with the stdout command line. Can you give me the name of the gaps file that was generated there?

EPiPH0NE

25th June 2008, 17:07

kartman_canada

27th June 2008, 18:23

hubblec4

27th June 2008, 20:51

hi Yraen

there is a small problem and i hope you understand what i mean.

Movie: Waterworld for example

the eac3to log shows me 14 subtitles but it is 18 subtitels.

14 normal subs and 4 forced subs. (evodemux shows me the 18 subs but can´t right demux them)

the 4 forced subs started later as the normal subs and i think thats the problem.

is there a way to fix that??? maybe by large scanning the feature.evo file or is that a problem of the eac3to.exe?

your GUI is very useful to me and i love it

hubble

EPiPH0NE

27th June 2008, 20:53

Sorry if I'm looking in the wrong spot or didn't search with the correct keywords.

I've been using eac3to on the command line to merge M2TS files from a seamless branching BD movie and come across a post the other day recommending this GUI... I like it but I can't figure out how to get the GUI to see the list of files (i.e. "xxxx.m2ts" + "yyyy.m2ts" + "zzzz.m2ts") and pass it to the command line.

I've been using tsmuxer to open the BD MPLS playlist and then cut/pasting the list into the eac3to command line directly in a shell.

is there a way to get the GUI to streamline these steps?

Path/Sources tab choose 'Add Source Folder(s)' and choose your 'STREAM' folder -> 'Eac3to Audio' tab use the 'Input Folder' drop down and select your STREAM folder -> eac3to will then scan the disc -> choose which title set you want -> continue your processing.

Yraen

27th June 2008, 22:38

stdout.pcm.gaps

I should get that fixed later today/tomorrow.

I've been using eac3to on the command line to merge M2TS files from a seamless branching BD movie and come across a post the other day recommending this GUI... I like it but I can't figure out how to get the GUI to see the list of files (i.e. "xxxx.m2ts" + "yyyy.m2ts" + "zzzz.m2ts") and pass it to the command line.

I've been using tsmuxer to open the BD MPLS playlist and then cut/pasting the list into the eac3to command line directly in a shell.

is there a way to get the GUI to streamline these steps?

You can do like EPiPH0NE said or like I do. I point it to the root movie folder: D:\I_ROBOT\
and eac3to can read it from there also. If your getting it straight off the disc, just point it to the disc drive: E:\

hi Yraen

there is a small problem and i hope you understand what i mean.

Movie: Waterworld for example

the eac3to log shows me 14 subtitles but it is 18 subtitels.

14 normal subs and 4 forced subs. (evodemux shows me the 18 subs but can´t right demux them)

the 4 forced subs started later as the normal subs and i think thats the problem.

is there a way to fix that??? maybe by large scanning the feature.evo file or is that a problem of the eac3to.exe?

your GUI is very useful to me and i love it

hubble

Unfortunately that is an eac3to limitation and you're right about what the problem is. Eac3to, to the best of my knowledge, only reads so much of the .evo/.m2ts files to see the streams contained within. Since they start later, eac3to never sees them. You might post in the eac3to thread and see if madshi might want a sample or there is a command line switch that will let eac3to read deeper into the files.

Does unchecking the box "Fast EVO checking" let Evodemux see and demux the streams correctly? I seem to remember using it a long time ago when I had a trouble HD-DVD and it helped then (don't remember the problem though).

Thanks.

Yraen

28th June 2008, 13:58

Eac3to and More GUI 1.09 b 7 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 7
- Fixed gaps detection for stdout
- Added .eac3 as demux type
- minor fixes

hubblec4

28th June 2008, 15:44

hi Yraen

when i disable the Fast Checking or set it to 999mb it finds the other subs. but demux is not correctly.

i hope madshi will fix that

hubble

EPiPH0NE

28th June 2008, 21:43

B4tm4n

28th June 2008, 22:06

@ Yraen(Off topic)

I remember you were looking for an alternative download site and I came across this.
http://getdropbox.com/
Effortless sync
Changes to your files are instantly synced across your computers.

Yraen

29th June 2008, 00:09

I signed up for the beta. If/when they contact me I'll test it out and see how it works. Thanks. :)

Yraen

29th June 2008, 08:58

Eac3to and More GUI 1.09 b 7 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/)

Changelog:
v 1.09 beta 8
- Fixed a bug where in a certain scenario gaps detection could return a false reading on finding gaps files.

B4tm4n

29th June 2008, 12:23

I signed up for the beta. If/when they contact me I'll test it out and see how it works. Thanks. :)

No problem.

I'm downloading from Yahoo now @ 0.1 KB/s Its been 31 mins and I'm only at 61 %.:p

Yraen

29th June 2008, 14:15

EPiPH0NE

29th June 2008, 19:42

Until yahoo figures out the problem, or this works out nice, I'll also host the files on MediaFire. Eac3to And More GUI v 1.09 b 8 (http://www.mediafire.com/?sharekey=483e9d29164ef2f3d5a101cf914073b417c134476594f301)

edit: Loks like it allows me to link to a folder, which should be nice. Hopefully it won't change urls on me.

Ahhhh.....much better then the 0.5k/s I was getting the other day from Yahoo :) Thnx for the fix. You and madshi have been on fire this week!

Yraen

30th June 2008, 23:32

Eac3to and More GUI v 1.09 b 9 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/) at yahoo.
Eac3to And More GUI v 1.09 b 9 (http://www.mediafire.com/?sharekey=483e9d29164ef2f3d5a101cf914073b417c134476594f301) at MediaFire (yahoo can be slow at times lately).

Changelog:
v 1.09 beta 9
- Added support for "-no7doubling" found in eac3to 2.51

hubblec4

1st July 2008, 20:10

Hi Yraen

When I demux the subs i can choose one sub only. is there a way to extract all subs in one pass??

hubble

Yraen

1st July 2008, 22:16

Once you've added the sub you want, click lock and add the next one. This will be much easier in 1.10 when I get it finished.

hubblec4

2nd July 2008, 09:35

thanks for helping

EPiPH0NE

10th July 2008, 22:05

I am still having problems with gaps and stdout using 1.09b9:

eac3to v2.52
command line: "P:\eac3to_2.52\eac3to.exe" "F:\" 3) 4: "stdout.pcm" -down6
------------------------------------------------------------------------------
M2TS, 2 video tracks, 3 audio tracks, 1:31:31
1: Chapters, 17 chapters
2: h264/AVC, 1080p24 /1.001 (16:9)
3: h264/AVC, 480p24 /1.001 (20:11)
4: DTS Master Audio, English, 7.1 channels, 24 bits, 48khz
5: AC3, French, 5.1 channels, 640kbit/s, 48khz, dialnorm: -27dB
6: AC3, English, 2.0 channels, 192kbit/s, 48khz, dialnorm: -27dB
[a04] Extracting audio track number 4...
[a04] Mixing surround channels...
Loading white noise (needed for dithering)...
[a04] Decoding with ArcSoft DTS Decoder...
[a04] Swapping endian...
[a04] Remapping channels...
[a04] Creating file "stdout.pcm"...
[a04] Audio overlaps for 6ms at playtime 0:08:25.
[a04] Audio overlaps for 14ms at playtime 0:37:42.
[a04] Audio overlaps for 5ms at playtime 0:44:09.
[a04] Audio overlaps for 7ms at playtime 0:44:59.
[a04] Audio overlaps for 9ms at playtime 1:06:16.
[a04] The audio file was demuxed without making use of the gap/overlap information.
[a04] Please rerun the same eac3to command line. That will correct the gaps/overlaps.
Video track 2 contains 131665 frames.
Video track 3 contains 131665 frames.
eac3to processing took 58 minutes, 5 seconds.
Done.

Should I also be naming the file 'stdout' on the stdout tab? I always use 'stdout' on the 'Eac3to Audio' tab and 'Audio' on the 'stdout' tab.

Yraen

11th July 2008, 00:04

Eac3to names the gaps file the name that eac3to puts out. It should be checking to see if stdout.pcm.gaps file is found though. You only need the "stdout" name for eac3to. I do like you do, and name the audio "audio" on the stdout tab.

Looking at the code the check is in there. I'll queue up some tests though and see what happens.

Yraen

12th July 2008, 03:45

Eac3to and More GUI 1.09 b 10 (http://briefcase.yahoo.com/bc/yraen@sbcglobal.net/lst?.dir=/Eac3to+and+More+GUI&.order=&.view=l&.src=bc&.done=http%3a//briefcase.yahoo.com/) at yahoo.
Eac3to And More GUI 1.09 b 10 (http://www.mediafire.com/?sharekey=483e9d29164ef2f3d5a101cf914073b417c134476594f301) at mediaFire (yahoo can be slow at times lately).

Changelog:
v 1.09 beta 10
- Fixed gaps detection in stdout for real this time
- enabled ctrl-tab and ctrl-shift-tab for tab changing

hubblec4

12th July 2008, 10:38

Hi Yraen

the new feature in eac3to is: dts decode with arcsoft!
its posible to choose this feature in your gui??

hubble

Yraen

12th July 2008, 11:43

To the best of my knowledge, there is no switch in eac3to to specify the arcsoft decoder over the others. If you have it installed, and it is working (not expired) then eac3to will use it. Before my demo expired, eac3to used it by default. Once I get around to buying the program, I'm sure eac3to will go back to using it again.

I'll always try to stay on top of the switches that get added to eac3to, but something new (arcsoft) that gets added without needing any user input will always work by just using the latest version of eac3to.