m2v editor

sesko · 10th April 2005, 18:00

Anybody knows for any good program for edit m2v files.
I tried with adobe premiere, but when i import m2v in don't shows correct lengt of movie, or it don't import all movie.
I would like to add a picture with text on m2v.

Please tell me for any good programs to do this

tnx

scraper · 11th April 2005, 10:59

I think i read somewhere that virtualdubmod is able to read m2v's.
You could give it a try, it's free

reboot · 11th April 2005, 15:52

Cuttermaran.
Virtualdubmod may edit, but it'll resave as an avi, unless you want to frameserve, and re-encode.

sesko · 11th April 2005, 19:15

at least what i found about Cuttermaran, this program can only cut m2v files, i dont want to cut, i want to place a picture over m2v movie, for some tine and not over all movie

lark · 12th April 2005, 00:58

did i understand you correctly
that you want to overlay a picture on the m2v for some time starting from frame x and ending on frame y?

to me that sounds like encoding that part again.
so perhaps the best way to accomplish this is to
- cut the m2v into 3 parts:
<first frame> to <frame x-1>
<frame x> to <frame y>
<frame y+1> to <last frame>
- overlay your pic with 2nd part and encode that
(e.g. avisynth & quenc)
- join the 3 parts again

regards
t

mpucoder · 12th April 2005, 01:07

Well, that's what Adobe premiere, AfterEffects, Pinnacle Studio (8 and 9), and other NLE editors can do. But sesko says Adobe doesn't import the video properly. Since that program is a veteran I'd suggest looking at what is wrong with the video, or the settings. Another place for ideas would be the NLE forum.

sesko · 12th April 2005, 15:34

i try many different m2v from menu of dvds, and adobe didn't import correctly any of them

lark · 12th April 2005, 16:09

how did you demux the m2v files?
can you open them with any other prog?

regards
t

sesko · 12th April 2005, 17:59

i remux with vobedit by celid, yes i can open them with other programs, but some says correct lenght, some wrong

mpucoder · 12th April 2005, 18:46

The m2v file probably contains more than one end_sequence_header. Most programs consider the first of these headers to be the end of the video.
Are you demuxing more than one VobID? If so, try demuxing just the VobID you want to edit.

sesko · 13th April 2005, 14:50

but how to do that, because, ihave menu, adn when i demuxe with vobedit by celID it demuxe all movies in menu

lark · 13th April 2005, 15:06

not quite sure, but would PgcDemux do the trick?

regards
t

mpucoder · 13th April 2005, 15:49

VobEdit does not demultiplex menus, only the main video, even if you open VTS_01_0.vob

sesko · 13th April 2005, 15:50

i wonder with which program supreme group edit mv2 in menu of woodsman dvd-r. This is one good job. They add custom button to subtitle menu and the button is over movie too.

Msc_Alex · 13th April 2005, 21:39

Quote:

Originally posted by mpucoder
VobEdit does not demultiplex menus, only the main video, even if you open VTS_01_0.vob

With vobedit you can demux the menu by cel ID, then you have to find the right cel.vob you want to edit and load it up in vobedit and strip the m2v out. If the time is not correct you have the wrong cel or as mpucoder sad

Quote:

contains more than one end_sequence_header

you could remove it (the end_sequence_header) with restream. Adobe premiere should display correct. But if the remux would still work ?? Well trail and error, have fun.

sesko · 15th April 2005, 12:27

i found out that virtualdub mod opens m2v files, and you can add picture to it with logo filter but you can only save file to avi, not to m2v.That is bad

reboot · 15th April 2005, 15:31

Use vdubmod and frameserve it.

sesko · 15th April 2005, 19:55

i use virtual dub, but i dont know where is funcion frameserve, could you please tell me

Bruno Cappelletti · 15th April 2005, 20:32

It's down there on the File menu.

CoNS · 20th April 2005, 11:53

Quote:

Originally posted by sesko
i wonder with which program supreme group edit mv2 in menu of woodsman dvd-r. This is one good job. They add custom button to subtitle menu and the button is over movie too.

Ahh, so that's what you wanna do...

I'm not saying that I know of the Supreme release you refer to, but here's how to do the editing: http://forum.doom9.org/showthread.php?s=&threadid=92914 (check both guides referred to in that thread)

BTW, you might wanna check out rule no. 6 of the forum rules before any of the mods slaps your fingers!!

10th April 2005, 18:00	#1 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	m2v editor Anybody knows for any good program for edit m2v files. I tried with adobe premiere, but when i import m2v in don't shows correct lengt of movie, or it don't import all movie. I would like to add a picture with text on m2v. Please tell me for any good programs to do this tnx

11th April 2005, 15:52	#3 \| Link
reboot Registered User Join Date: Feb 2004 Location: Canada Posts: 64	Cuttermaran. Virtualdubmod may edit, but it'll resave as an avi, unless you want to frameserve, and re-encode. __________________ "Manual" is not the Mexican dude that soldered the chips on the board...[br] Cheers, Jim

15th April 2005, 15:31	#17 \| Link
reboot Registered User Join Date: Feb 2004 Location: Canada Posts: 64	Use vdubmod and frameserve it. __________________ "Manual" is not the Mexican dude that soldered the chips on the board...[br] Cheers, Jim

11th April 2005, 10:59	#2 \| Link
scraper Registered User Join Date: Mar 2005 Location: Holland Posts: 31	I think i read somewhere that virtualdubmod is able to read m2v's. You could give it a try, it's free

11th April 2005, 19:15	#4 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	at least what i found about Cuttermaran, this program can only cut m2v files, i dont want to cut, i want to place a picture over m2v movie, for some tine and not over all movie

12th April 2005, 00:58	#5 \| Link
lark Regular User Join Date: May 2002 Location: Yes and No Posts: 411	did i understand you correctly that you want to overlay a picture on the m2v for some time starting from frame x and ending on frame y? to me that sounds like encoding that part again. so perhaps the best way to accomplish this is to - cut the m2v into 3 parts: <first frame> to <frame x-1> <frame x> to <frame y> <frame y+1> to <last frame> - overlay your pic with 2nd part and encode that (e.g. avisynth & quenc) - join the 3 parts again regards t

12th April 2005, 01:07	#6 \| Link
mpucoder Moderator Join Date: Oct 2001 Posts: 3,530	Well, that's what Adobe premiere, AfterEffects, Pinnacle Studio (8 and 9), and other NLE editors can do. But sesko says Adobe doesn't import the video properly. Since that program is a veteran I'd suggest looking at what is wrong with the video, or the settings. Another place for ideas would be the NLE forum.

12th April 2005, 15:34	#7 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	i try many different m2v from menu of dvds, and adobe didn't import correctly any of them

12th April 2005, 16:09	#8 \| Link
lark Regular User Join Date: May 2002 Location: Yes and No Posts: 411	how did you demux the m2v files? can you open them with any other prog? regards t

12th April 2005, 17:59	#9 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	i remux with vobedit by celid, yes i can open them with other programs, but some says correct lenght, some wrong

12th April 2005, 18:46	#10 \| Link
mpucoder Moderator Join Date: Oct 2001 Posts: 3,530	The m2v file probably contains more than one end_sequence_header. Most programs consider the first of these headers to be the end of the video. Are you demuxing more than one VobID? If so, try demuxing just the VobID you want to edit.

13th April 2005, 14:50	#11 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	but how to do that, because, ihave menu, adn when i demuxe with vobedit by celID it demuxe all movies in menu

13th April 2005, 15:06	#12 \| Link
lark Regular User Join Date: May 2002 Location: Yes and No Posts: 411	not quite sure, but would PgcDemux do the trick? regards t

13th April 2005, 15:49	#13 \| Link
mpucoder Moderator Join Date: Oct 2001 Posts: 3,530	VobEdit does not demultiplex menus, only the main video, even if you open VTS_01_0.vob

13th April 2005, 15:50	#14 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	i wonder with which program supreme group edit mv2 in menu of woodsman dvd-r. This is one good job. They add custom button to subtitle menu and the button is over movie too.

15th April 2005, 12:27	#16 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	i found out that virtualdub mod opens m2v files, and you can add picture to it with logo filter but you can only save file to avi, not to m2v.That is bad

15th April 2005, 19:55	#18 \| Link
sesko Registered User Join Date: Oct 2003 Posts: 45	i use virtual dub, but i dont know where is funcion frameserve, could you please tell me

15th April 2005, 20:32	#19 \| Link
Bruno Cappelletti Registered User Join Date: Apr 2003 Location: Rio Grande, RS, Brasil Posts: 34	It's down there on the File menu.