Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. Domains: forum.doom9.org / forum.doom9.net / forum.doom9.se |
|
|
#1 | Link |
|
߀ åf®åîÐ!
Join Date: Apr 2002
Location: The Netherlands
Posts: 15
|
Audio and video are not synced, this is not a ripping issue
Hi there,
I made lots a SVCD's with DVD2SVCD, i am using 1.0.7b4 + CCE 2.5 right now. I tryed to rip Romeo must die (region2 PAL) I dont use internal ripper from DVD2SVCD but i use DVD Decrypter. My rip did run smootly as always no problems at all in the ripping period. So i burned images, and put them in my standalone, but movie is started with some kind a trialer and the sound was already began with the real movie part, so when the trailer was ended, was sound already lots more further than movie it self when movie was playing. Subs where working ok there was no sync problem there at all. I think there was no sound for that trailer at the begining and DVD2SVCD grab the movie audio stream. My question is, if i start to rip like in Q46 thus drop some chapters from the begining till the trailer ends and rip again will audio and video be synced? My logfile: -------------------------------------------------------- - 21-4-2002 11:28:14 - DVD to SVCD Conversion - DVD2SVCD ver. 1.0.7 build 4 -------------------------------------------------------- Initializing Initializing finished. -------------------------------------------------------- - 21-4-2002 11:28:16 - Analyzing subtitles -------------------------------------------------------- Subtitle found: StreamID: 0x24 Language: Arabic Subtitle found: StreamID: 0x25 Language: Español Subtitle found: StreamID: 0x21 Language: Français Subtitle found: StreamID: 0x26 Language: Deutsch Subtitle found: StreamID: 0x22 Language: Italiano Subtitle found: StreamID: 0x20 Language: English Subtitle found: StreamID: 0x23 Language: Nederlands Executing subtitle selection/verification. Subtitle selection/verification accepted. -------------------------------------------------------- - 21-4-2002 11:29:29 - Free on drive C: 3299.75 mb - Free on drive I: 7955.48 mb - Extracting the subtitles. -------------------------------------------------------- Subtitle extraction finished. Extracted these subtitles: SVCD Stream no: 1 Language: Nederlands Num. of subs: 760 Saving Subtitles -------------------------------------------------------- - 21-4-2002 11:49:32 - DVD2AVI -------------------------------------------------------- Creating DVD2AVI INI file: - D:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI Variable settings: iDCT_Algorithm: 32-bit SSE MMX Executing DVD2AVI. Executing DVD2AVI. Commandline: "D:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -IA=1 -CS=2 -YR=1 -EXIT -OF=[I:\romeomustdie\DVD2AVI_Project_file] -IF=[I:\romeomustdie\VTS_01_1.vob,I:\romeomustdie\VTS_01_2.vob,I:\romeomustdie\VTS_01_3.vob,I:\romeomustdie\VTS_01_4.vob,I:\romeomustdie\VTS_01_5.vob,I:\romeomustdie\VTS_01_6.vob] Framerate: 25000 Saving Subtitle Timecodes. Permanent subtitles. DVD2AVI processing done. -------------------------------------------------------- - 21-4-2002 12:04:10 - Free on drive C: 3299.75 mb - Free on drive I: 7928.73 mb - AUDIO Extraction -------------------------------------------------------- Found AC3 stream id: 0x80 Filename: I:\romeomustdie\Extracted_audio_1.ac3 Audio1 delay: -80 ms Audio extraction finished. -------------------------------------------------------- - 21-4-2002 12:21:42 - Free on drive C: 3299.75 mb - Free on drive I: 7625.08 mb - AUDIO conversion -------------------------------------------------------- Converting Audio to MP2. Filename: I:\romeomustdie\Extracted_audio_1.ac3 Executing BeSweet. Commandline: "D:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "I:\romeomustdie\Extracted_audio_1.ac3" -output "I:\ROMEOM~1\Encoded_audio_1.mp2" -logfile "I:\ROMEOM~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal ) -ota( -g max -d -80 ) -2lame( -e -b 160 -m s ) Audio conversion of I:\romeomustdie\Extracted_audio_1.ac3 finished. Audio conversion finished. -------------------------------------------------------- - 21-4-2002 12:54:48 - Free on drive C: 3299.75 mb - Free on drive I: 7498.55 mb - Converting Pictures -------------------------------------------------------- Converting: D:\Program Files\DVD2SVCD\Titelpicromeomust.bmp Converting: D:\Program Files\DVD2SVCD\DefaultChangeCD.bmp Finished converting pictures -------------------------------------------------------- - 21-4-2002 12:55:00 - Free on drive C: 3299.75 mb - Free on drive I: 7496.96 mb - Video Encoding using Cinema Craft -------------------------------------------------------- Executing Cinema Craft Encoder. StreamSectors: 1665085576 AudioSectors: 139182036 VideoPAPO: 23637060 ScanOffsetBytes: 257294 SeqAligningBytes: 16352431 VideoEndHeader: 8 SubtitleSectors: 0 EmptySectors: 238.00 PictureSectors: 600.00 PureMPEGStream: 1485656747.17 Seconds: 6866.16 CalcMPEGStream: 1485656747.17 Frames: 171529 CDSize: 800.00 Cut point 795.00 Variable Settings: Frames: 171529 Anti Noise Filter: 2 Passes: 4 Image Quality: 20 VAF file creation: On Video Encoding Mode: Multipass VBR Min. bitrate: 300 Max. bitrate: 2530 Avg. Bitrate: 1730 Closing program Video Encoding finished. -------------------------------------------------------- - 22-4-2002 12:45:55 - Free on drive C: 3299.75 mb - Free on drive I: 6039.72 mb - Converting Pictures from ES to PS -------------------------------------------------------- Saving bbMPEG settings: D:\Program Files\DVD2SVCD\bbMPEG\default.ini Executing RunbbMPEG. Commandline: "D:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "I:\romeomustdie\TitlePicture.bmp.mpg" -------------------------------------------------------- - 22-4-2002 12:46:13 - Free on drive C: 3299.75 mb - Free on drive I: 6039.68 mb - Converting Pictures from ES to PS -------------------------------------------------------- Saving bbMPEG settings: D:\Program Files\DVD2SVCD\bbMPEG\default.ini Executing RunbbMPEG. Commandline: "D:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "I:\romeomustdie\ChangeCDPicture.bmp.mpg" -------------------------------------------------------- - 22-4-2002 12:46:20 - Free on drive C: 3299.75 mb - Free on drive I: 6039.64 mb - Multiplexing and cutting -------------------------------------------------------- Saving bbMPEG settings: D:\Program Files\DVD2SVCD\bbMPEG\default.ini Offset in Seconds: 2 Executing bbMPEG. Variable Settings: Movie offset: 2 seconds Cut point: 795 mb Executing RunbbMPEG. Commandline: "D:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "I:\romeomustdie\bbMPEG_Muxed_File.mpg" Length of I:\romeomustdie\bbMPEG_Muxed_File00.mpg 3353 Seconds Offset in Seconds: 3355 Executing bbMPEG. Variable Settings: Movie offset: 2 seconds Cut point: 795 mb Executing RunbbMPEG. Commandline: "D:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "I:\romeomustdie\bbMPEG_Muxed_File.mpg" Multiplexing and cutting finished. -------------------------------------------------------- - 22-4-2002 13:18:05 - Free on drive C: 3299.75 mb - Free on drive I: 4456.14 mb - Determining length of audio -------------------------------------------------------- Analyzing: I:\romeomustdie\bbMPEG_Muxed_File00.mpg 3358.776 seconds I:\romeomustdie\bbMPEG_Muxed_File00.mpg Analyzing: I:\romeomustdie\bbMPEG_Muxed_File01.mpg 3278.232 seconds I:\romeomustdie\bbMPEG_Muxed_File01.mpg Analyzing finished. -------------------------------------------------------- - 22-4-2002 13:21:52 - Free on drive C: 3299.75 mb - Free on drive I: 4456.14 mb - Creating CD-Images using VCDXBuild -------------------------------------------------------- - No. of chapters to create: 22 CD image #1: CD_Image_File_CD1.bin Executing VCDXBuild. Commandline: "D:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --cue-file="C:\romeomustdieimg\CD_Image_File_CD1.cue" --bin-file="C:\romeomustdieimg\CD_Image_File_CD1.bin" "C:\romeomustdieimg\VCDXBuild_Script_1.xml" -------------------------------------------------------- - 22-4-2002 13:26:06 - Free on drive C: 2493.58 mb - Free on drive I: 4456.14 mb - Creating CD-Images using VCDXBuild -------------------------------------------------------- - No. of chapters to create: 18 CD image #2: CD_Image_File_CD2.bin Executing VCDXBuild. Commandline: "D:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --cue-file="C:\romeomustdieimg\CD_Image_File_CD2.cue" --bin-file="C:\romeomustdieimg\CD_Image_File_CD2.bin" "C:\romeomustdieimg\VCDXBuild_Script_2.xml" CD-Image creation finished. -------------------------------------------------------- - 22-4-2002 13:30:33 - Free on drive C: 1693.89 mb - Free on drive I: 4456.14 mb - SVCD Creation finished! -------------------------------------------------------- |
|
|
|
|
|
#2 | Link |
|
Old fart
Join Date: Oct 2001
Posts: 3,589
|
Two things.
1. Whether or not you think this is not a ripping issue There is no support unless you use the included rippers and I really do believe this is a ripping issue. Honestly. 2. Upgrade to the latest version Pretty simple. Try again ripping with the internal routines and the latest version. If you still have this problem post again with your log file just like you did. As far as your question goes. The only way to know is to try it. That is not a slight that is the truth. If you had used internal routines or Vstrip the trailer would not have been there and you, most likely, would not be having this problem. If you wanted it. You would have been better off doing it seperately. Mark
__________________
Oh no Mr. Bill! Last edited by markrb; 22nd April 2002 at 19:28. |
|
|
|
|
|
#3 | Link |
|
߀ åf®åîÐ!
Join Date: Apr 2002
Location: The Netherlands
Posts: 15
|
thx,
I'll give a try with the new version and internal ripper tommorow, the reason why i think it wasnt ripper issue has to do with my all other rips went good (i am talking about more 20 rips here) but you newer know
|
|
|
|
|
|
#4 | Link |
|
Old fart
Join Date: Oct 2001
Posts: 3,589
|
I will tell you a little secret, but keep it between us.
Other rippers work 80% of the time no problem, but Internal Routines works 95% of the time no problem and is the only way the Author and most of us have any control over the source. We have no common point to be able to help if you use something outside the included rippers so we really can't help. SmartRipper also did something different at version 2.4 and above that seems to cause problems with DVD2SVCD far more often then the 2.3x versions. This is the only reason we always ask if you have problems re-rip with the two included rippers. This way we can be assured of the way the data is handled and then elimate that from the equation. In your case you also ripped the trailer as part of the rip. This is very uncommon and is the X factor here. Nobody has experience with this so nobody can help. Mark
__________________
Oh no Mr. Bill! |
|
|
|
![]() |
|
|