RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 214

Atak_Snajpera · 20th February 2009, 18:45

send me also .meta files.

Discoboy · 20th February 2009, 18:57

Quote:

Originally Posted by Atak_Snajpera

send me also .meta files.

You mean “tsmuxer.meta” file?

If so here it is:

http://www.mediafire.com/?nnznyam4nmy

Does this file update again after encoding is finished and remux is conducted?

Do you need this file again if it changes after remux?

Atak_Snajpera · 20th February 2009, 19:11

Quote:

http://www.mediafire.com/?ymynlw0zfgt

It does not work

Quote:

Does this file update again after encoding is finished and remux is conducted?

No

Discoboy · 20th February 2009, 19:15

Quote:

Originally Posted by Atak_Snajpera

It does not work

No

Just updated the link, try again:

http://www.mediafire.com/?nnznyam4nmy

Atak_Snajpera · 20th February 2009, 19:37

@Discoboy
Can you explain me something? Why this line does not have --aud --nal-hrd ???

Code:

"C:\Program Files (x86)\BD_DVD\RipBot264v1.13.2\tools\x264\x264.exe" "C:\temp\RipBot264temp\job1\job1.avs" --pass 1 --bitrate 8160 --stats "C:\temp\RipBot264temp\job1\job1.stats" --sar 1:1 --level 4.0 --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --mixed-refs --bframes 3 --b-adapt 1 --weightb --direct auto --subme 7 --trellis 1 --partitions all --8x8dct --me umh --threads auto --thread-input --progress --no-psnr --no-ssim --partitions none --subme 3 --me dia --output "C:\temp\RipBot264temp\video.264"

Code:

"C:\Program Files (x86)\BD_DVD\RipBot264v1.13.2\tools\x264\x264.exe" "C:\temp\RipBot264temp\job1\job1.avs" --pass 2 --bitrate 8160 --stats "C:\temp\RipBot264temp\job1\job1.stats" --sar 1:1 --level 4.0 --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --mixed-refs --bframes 3 --b-adapt 1 --weightb --direct auto --subme 7 --trellis 1 --partitions all --8x8dct --me umh --threads auto --thread-input --progress --no-psnr --no-ssim --output "C:\temp\RipBot264temp\video.264"

--aud and --nal-hrd is always added if you select AVCHD Compatibility

Discoboy · 20th February 2009, 20:01

Atak,

Well-done you’ve located the prob

I’ve aborted the encoding of 1.13.2 with tools folder from 1.12.0 and just checked the Encoder Proprieties screen.

You can see from this screen dump attached:

http://www.mediafire.com/?jzdmynwimd1

That the check box is checked and “--aud and --nal-hrd” is present in the lower window, but does not show in the:

job1_EncodeVideoPass1.cmd

or

job1_EncodeVideoPass2.cmd

Files

Can you explain why this is??

I will now check standard 1.12.0

Discoboy · 20th February 2009, 20:37

Atak,

Yes!!!

With v1.12.0 both “job1_EncodeVideoPass1.cmd” and “job1_EncodeVideoPass1.cmd” files have “--aud and --nal-hrd” present.

Requested files attached to show that “--aud and --nal-hrd” is present

http://www.mediafire.com/?dwmzywntujf

Over to you now...

Very much look forward to the next release of Ripbot264

Atak_Snajpera · 20th February 2009, 21:24

@8ternity
Tell me what you do step by step

knight_panther · 20th February 2009, 22:16

when ever i add the avi file its not giving any next botton ?

Nemesis7 · 21st February 2009, 05:09

Quote:

Originally Posted by Atak_Snajpera

Haha! Do you know what was your problem?!?! VERY simple

You selected COPY STREAM under audio profile that's why audio was out of sync. Video was trimed but audio was untouched. Here's a lesson for you next time. You must always re-encode audio when you add Trim function!

Aah, can't leave it untouched then. Thnx for letting me know mate. Cheers!

Discoboy · 21st February 2009, 09:11

Hi Atak,

Just to update you.

I ran 1.13.2 in 64bit mode! but manually added the “--aud” and “--nal-hrd” attributes to both the “job1_EncodeVideoPass1.cmd” and “job1_EncodeVideoPass1.cmd” files before starting the encoding.

Results = Working !!

Chapter skip and pause functions now working

Also file size is good at 3MB short in 64bit mode.

Are you any closer to working out why these attributes are not be added but are selected in the GUI?

Many thanks,
Discoboy

dokworm · 21st February 2009, 23:56

Probably a dumb question, but will all of this work under Vista64?

BobZhome · 22nd February 2009, 00:03

Quote:

Originally Posted by dokworm

Probably a dumb question, but will all of this work under Vista64?

Yes, works with Vista 64

T-x · 22nd February 2009, 00:24

Atak_Snajpera

Woud it be possible to make an add folder option where one where able to import an entire folder insted of youdst one file at a time

glood1 · 22nd February 2009, 01:44

hello
i encoding with 2 pass 15592 Kbits defaut value is 8192
the restult is a un sample between 10 Go and 15 Go

which the better result CRF with low number or
tow pass with 15592 ?

thanks
sorry for my english

8ternity · 22nd February 2009, 06:55

Quote:

Originally Posted by Atak_Snajpera

@8ternity
Tell me what you do step by step

-Add
-Select the MKV source
-Save As selection to bluray
-go to properties
-set to 23.976
-go to Noise selection FILM
-click Preview

I've not set the audio before the video stream. I check the preview and was not possible so i not start the project.

Thanks.

PS. i have try and convert with version 1.13.1 yesturday and everything was fine, included the audio sync with the 23.976fps changed when selected to reconvert the audio.

spikywits · 22nd February 2009, 08:51

how do I change the title of the encoded video? (in dsmux)
I want to put some meaningful description but there is no option to configure it before the encoding process

nekrosoft13 · 22nd February 2009, 10:23

what does that error mean?

file info

General
Complete name : H:\Family Movies\PL.avi
Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
File size : 11.1 GiB
Duration : 34h 21mn
Overall bit rate : 770 Kbps
Recorded date : 2006-03-25 16:12:18

Video
Format : Digital Video
Duration : 55mn 1s
Bit rate : 28.8 Mbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 1.500
Original display aspect ratio : 4/3
Frame rate mode : Constant
Frame rate : 29.970 fps
Standard : NTSC
Colorimetry : 4:1:1
Scan type : Interlaced
Bits/(Pixel*Frame) : 2.778
Stream size : 11.1 GiB (100%)

Audio #1
Format : PCM
Bit rate : 768 Kbps
Channel(s) : 2 channels
Sampling rate : 32.0 KHz
Resolution : 12 bits

Audio #2
Format : PCM
Duration : 34h 21mn
Channel(s) : 2 channels
Sampling rate : 32.0 KHz
Resolution : 12 bits
Interleave, duration : 33 ms (1.00 video

media info detects 34 hours, clip really is 55minutes

magmo · 22nd February 2009, 18:35

Atak

After removing divx7, ripbot worked fine. By the way do you know any type of application that can check/verify that the created mkv file is ok? The reason I ask is that all mkv files I create using your application can be played on the pc but not on my Tvix 6500

nekrosoft13 · 22nd February 2009, 20:31

Quote:

Originally Posted by magmo

Atak

After removing divx7, ripbot worked fine. By the way do you know any type of application that can check/verify that the created mkv file is ok? The reason I ask is that all mkv files I create using your application can be played on the pc but not on my Tvix 6500

try this
http://www.alexander-noe.com/video/mkvverify/

20th February 2009, 18:45	#4261 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,952	send me also .meta files. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

20th February 2009, 20:37	#4267 \| Link
Discoboy Registered User Join Date: Oct 2001 Location: UK Posts: 131	Panasonic BD30 / BD35 player chapter skip/pause broken on 1.13.0, 1.13.1, 1.13.2 Atak, Yes!!! With v1.12.0 both “job1_EncodeVideoPass1.cmd” and “job1_EncodeVideoPass1.cmd” files have “--aud and --nal-hrd” present. Requested files attached to show that “--aud and --nal-hrd” is present http://www.mediafire.com/?dwmzywntujf Over to you now... Very much look forward to the next release of Ripbot264 Last edited by Discoboy; 20th February 2009 at 22:08.

20th February 2009, 21:24	#4268 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,952	@8ternity Tell me what you do step by step __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

21st February 2009, 09:11	#4271 \| Link
Discoboy Registered User Join Date: Oct 2001 Location: UK Posts: 131	Panasonic BD30 / BD35 player chapter skip/pause broken on 1.13.0, 1.13.1, 1.13.2 Hi Atak, Just to update you. I ran 1.13.2 in 64bit mode! but manually added the “--aud” and “--nal-hrd” attributes to both the “job1_EncodeVideoPass1.cmd” and “job1_EncodeVideoPass1.cmd” files before starting the encoding. Results = Working !! Chapter skip and pause functions now working Also file size is good at 3MB short in 64bit mode. Are you any closer to working out why these attributes are not be added but are selected in the GUI? Many thanks, Discoboy Last edited by Discoboy; 21st February 2009 at 09:15.

20th February 2009, 20:01	#4266 \| Link
Discoboy Registered User Join Date: Oct 2001 Location: UK Posts: 131	Atak, Well-done you’ve located the prob I’ve aborted the encoding of 1.13.2 with tools folder from 1.12.0 and just checked the Encoder Proprieties screen. You can see from this screen dump attached: http://www.mediafire.com/?jzdmynwimd1 That the check box is checked and “--aud and --nal-hrd” is present in the lower window, but does not show in the: job1_EncodeVideoPass1.cmd or job1_EncodeVideoPass2.cmd Files Can you explain why this is?? I will now check standard 1.12.0

20th February 2009, 22:16	#4269 \| Link
knight_panther Registered User Join Date: Feb 2009 Posts: 1	when ever i add the avi file its not giving any next botton ?

21st February 2009, 23:56	#4272 \| Link
dokworm Registered User Join Date: May 2003 Posts: 63	Probably a dumb question, but will all of this work under Vista64?

22nd February 2009, 00:24	#4274 \| Link
T-x Registered User Join Date: Jan 2009 Posts: 9	Atak_Snajpera Woud it be possible to make an add folder option where one where able to import an entire folder insted of youdst one file at a time

22nd February 2009, 01:44	#4275 \| Link
glood1 Registered User Join Date: Feb 2009 Posts: 17	hello i encoding with 2 pass 15592 Kbits defaut value is 8192 the restult is a un sample between 10 Go and 15 Go which the better result CRF with low number or tow pass with 15592 ? thanks sorry for my english

22nd February 2009, 08:51	#4277 \| Link
spikywits Registered User Join Date: Apr 2008 Posts: 1	how do I change the title of the encoded video? (in dsmux) I want to put some meaningful description but there is no option to configure it before the encoding process

22nd February 2009, 10:23	#4278 \| Link
nekrosoft13 Registered User Join Date: Jun 2003 Location: Chicagoland or Poland Posts: 193	what does that error mean? file info General Complete name : H:\Family Movies\PL.avi Format : AVI Format/Info : Audio Video Interleave Format profile : OpenDML File size : 11.1 GiB Duration : 34h 21mn Overall bit rate : 770 Kbps Recorded date : 2006-03-25 16:12:18 Video Format : Digital Video Duration : 55mn 1s Bit rate : 28.8 Mbps Width : 720 pixels Height : 480 pixels Display aspect ratio : 1.500 Original display aspect ratio : 4/3 Frame rate mode : Constant Frame rate : 29.970 fps Standard : NTSC Colorimetry : 4:1:1 Scan type : Interlaced Bits/(Pixel*Frame) : 2.778 Stream size : 11.1 GiB (100%) Audio #1 Format : PCM Bit rate : 768 Kbps Channel(s) : 2 channels Sampling rate : 32.0 KHz Resolution : 12 bits Audio #2 Format : PCM Duration : 34h 21mn Channel(s) : 2 channels Sampling rate : 32.0 KHz Resolution : 12 bits Interleave, duration : 33 ms (1.00 video media info detects 34 hours, clip really is 55minutes

22nd February 2009, 18:35	#4279 \| Link
magmo Registered User Join Date: Jan 2009 Posts: 33	Atak After removing divx7, ripbot worked fine. By the way do you know any type of application that can check/verify that the created mkv file is ok? The reason I ask is that all mkv files I create using your application can be played on the pc but not on my Tvix 6500