DVD Rebuilder v1.00 RC1 !!!!

[jdobbs]

This is the first I'd heard of the inconsistency in the selections when swapping skins -- I'll look at that. The Runtime Error 9 was a silly error that has been corrected and will come out soon in the next version. When you open the program the first VTS in the windows should be selected. If you click on it first you won't get the error.

[Rippraff]

If you click on it first you won't get the error.
Okay, :thanks: I try this the next time.
And what about the unremembered streams when you restart RB? This didn't work in older versions but worked fine in a lot of versions before 0.93.2.

Cu Rippraff

[SCSI]

Thank you very much. Just installed it but still haven't tested it. Nice interface.

[jdobbs]

Okay, :thanks: I try this the next time.
And what about the unremembered streams when you restart RB? This didn't work in older versions but worked fine in a lot of versions before 0.93.2.

Cu RippraffI'll check it out -- that's a little surprising as it really hasn't changed -- but sometimes new code has unexpected consequences. I'll look into it -- but an initial look doesn't confirm your report, I've started, changed, restarted several times -- and it always seems to work for me. I even took out the fix for the Runtime Error 9 and couldn't repeat it.

[TuRiSOft]

I got a "Runtime error 5" on rebuilding phase with "THE GOONIES" pal.
I did it with CCE Basic 2.70.1.4 and now I'm going to retry with CCE-Sp 2.50 .
I will investigate then let you know !!!

Ok , same problem with CCE2.50 and HC0.15b yet!!!

[Rippraff]

I'll check it out -- that's a little surprising as it really hasn't changed -- but sometimes new code has unexpected consequences. I'll look into it -- but an initial look doesn't confirm your report, I've started, changed, restarted several times -- and it always seems to work for me. I even took out the fix for the Runtime Error 9 and couldn't repeat it.
You're right. I can't repeat this anymore too. Maybe I swapped the skin before. Sorry for putting you to trouble. :o

Cu Rippraff

[Easy123]

@jdobbs: Did Metallica - S&M (PAL) again with CCE 2.67. Didn´t work. The Same as it is with HC. Picture stopps when the Angle gets switched back from e.g. Angle 5 ends to Angle 1.... Guess I have to do that Bitch "by Hand" which is a lot of work :devil: Perhaps it´s the Fact that the Angles are encoded with a too high bitrate as it get´s limited the more angles are used?

[ElRey]

I tried the new skins, but they don't seem to work properly if you are set to "large fonts"/120 DPI mode in Windows (Control Panel / Display / Settings tab / Advanced button / General Tab).

Screen shots of them (from other folks) look real nice, though. They look pretty scrambled at 120 DPI...

[ElRey]

Started DVD-RB. It's in "Movie Only" mode with 4 audio streams in the list (all checked on). If I uncheck the last one I get a dialog that says, "Runtime error '9', subscript out of range".

If I switch Movie Only mode off, select the same VTS, and uncheck the last audio stream, there is no error.

This only happens when there is no VTS selected. When I start it up, there's already a rip in the source directory from last time. When DVD-RB comes up, there is a thin line around the item in the VTS list, but it's not highlighted. If I click on the VTS in the list first to highlight it, and then click off the audio stream, there is no error. If I click on the audio stream first (VTS in list but not selected) you get the error. Probably trying to use the -1 (CurSel when nothing is selected) as an array index somewhere in the code...

[jdobbs]

Thanks. I've fixed that and will get it out soon. I'm trying to fix as many of the "new" bugs introduced with the new interface and/or ILVU code and get them out to everyone.

[leopardone]

great work m8!!!
let me have a look :)

[bteamfox]

I pesonally still like the original skin, my reasons why -

1. You can see all the Folder Path, VTS, Subpicture information etc on one screen instead of having to press tabs etc to see it,(waist of time in my view, pritty, but slower to use).
2. See 1. :)

[jdobbs]

That's why it's still there. Everybody has different tastes.

[fumantsu]

I don't see if someone else has write about this. I try the tech Original and when the Prepare phase has ended (from what I see in the log) the buttons Encode, Rebuild was gray and the Prepare still shows Abort. I had to press the Abort to continue with the rest of the process. The same doesn't happen when the Encode phase has ended.


PS. jdobbs keep up the good work!!

[Rockas]

it's been noticed :)
check here:
http://forum.doom9.org/showthread.php?t=96840

[ookzDVD]

@jdobbs,

First I wanna say thanks for your great work on DVD-RB 1.0 RC1,
I just don't have much time for testing it but I will.

I wanna to ask you is about the "Menu".
I hope there will be possible to reduce the "Menu" size.

Thank you.

[jdobbs]

Which menu?

[Rockas]

I guess "ookzDVD" is refering the Menus Compression... DVD Menus :D

[Mr. Monte]

Just menushrink before processing

[k2002rahmani]

Well, that can result in preprocessing errors that get blamed on DVD-RB. I would not recommend using other programs prior to DVD-RB.

[winny]

On the rare occasions where I've needed to pre-process I've always tried again using dvd-rb only before choosing to report a potential problem.

I don't see the harm in using pre-processing programs, providing you don't report any dvd-rb errors without considering the above caveat.

[marpada]

Bad news , I also failed with my second multiangle project :(

The DVD is "Genesis - The way we walk Disc 1". No preprocessig

Again the problem is during the rebuild phase , but now the error is :
" Run-time error '63' Bad record number".

I also tried "Special Error Processing" option.

[23:26:28] One Click encoding activated...
-----------------
[23:26:28] Phase I, PREPARATION started.
- CCE SP ECLCCE encoder selected.
- "Steal Space from Extras" mode is enabled.
- VTS_01: 3.543.197 sectors.
-- ANGLE and/or INTERLEAVING is present.
-- Scanning and writing .D2V file
- Processed 1.582,7MB ILVU section...
- Processed 1.354,7MB ILVU section...
- Processed 2.557,1MB ILVU section...
- Processed 726,6MB ILVU section...
- Processed 522,7MB ILVU section...
-- Processed 374.475 frames.
-- Building .AVS and .ECL files
- VTS_03: 401.935 sectors.
-- Scanning and writing .D2V file
-- Processed 52.516 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 44,4%
- Overall Bitrate : 1.357Kbs
- Space for Video : 2.949.696KB
- Movie improvement from extra reduction = 1,3%
- HIGH/LOW/TYPICAL Bitrates: 2.111/851/1.357 Kbs
[23:38:16] Phase I, PREPARATION completed in 12 minutes.
[23:38:17] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_03 segment 2
- Creating M2V for VTS_03 segment 3
- Creating M2V for VTS_03 segment 4
- Creating M2V for VTS_03 segment 5
- Creating M2V for VTS_03 segment 6
- Creating M2V for VTS_03 segment 7
- Creating M2V for VTS_03 segment 8
- Creating M2V for VTS_03 segment 9
- Creating M2V for VTS_03 segment 10
- Creating M2V for VTS_03 segment 11
- Creating M2V for VTS_03 segment 12
- Creating M2V for VTS_03 segment 13
- Creating M2V for VTS_03 segment 14
- Creating M2V for VTS_03 segment 15
- Creating M2V for VTS_03 segment 16
- Creating M2V for VTS_03 segment 17
- Creating M2V for VTS_03 segment 18
- Creating M2V for VTS_03 segment 19
- Creating M2V for VTS_03 segment 20
- Creating M2V for VTS_03 segment 21
- Creating M2V for VTS_03 segment 22
- Creating M2V for VTS_03 segment 23
- Creating M2V for VTS_03 segment 24
- Creating M2V for VTS_03 segment 25
- Creating M2V for VTS_03 segment 26
- Creating M2V for VTS_03 segment 27
- Creating M2V for VTS_03 segment 28
- Creating M2V for VTS_03 segment 29
- Creating M2V for VTS_03 segment 30
- Creating M2V for VTS_03 segment 31
- Creating M2V for VTS_03 segment 32
- Creating M2V for VTS_03 segment 33
- Creating M2V for VTS_03 segment 34
[11:15:52] Phase II ENCODING completed in 697 minutes.
[11:15:52] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Processed 1.582,7MB ILVU section...
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Rebuilding seg 2 VOBID 2 CELLID 2
- Rebuilding seg 3 VOBID 3 CELLID 1
- Rebuilding seg 4 VOBID 3 CELLID 2
- Rebuilding seg 5 VOBID 4 CELLID 1
- Rebuilding seg 6 VOBID 4 CELLID 2
- Rebuilding seg 7 VOBID 5 CELLID 1
- Rebuilding seg 8 VOBID 5 CELLID 2
- Updating NAVPACKS for VOBID_02
- Updating NAVPACKS for VOBID_03
- Updating NAVPACKS for VOBID_04
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 9 VOBID 6 CELLID 1
- Rebuilding seg 10 VOBID 6 CELLID 2
- Processed 1.354,7MB ILVU section...
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 11 VOBID 7 CELLID 1
- Rebuilding seg 12 VOBID 8 CELLID 1
- Rebuilding seg 13 VOBID 9 CELLID 1
- Rebuilding seg 14 VOBID 10 CELLID 1
- Updating NAVPACKS for VOBID_07
- Updating NAVPACKS for VOBID_08
- Updating NAVPACKS for VOBID_09
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 15 VOBID 11 CELLID 1
- Rebuilding seg 16 VOBID 11 CELLID 2
- Processed 2.557,1MB ILVU section...
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 17 VOBID 12 CELLID 1
- Rebuilding seg 18 VOBID 13 CELLID 1
- Rebuilding seg 19 VOBID 14 CELLID 1
- Rebuilding seg 20 VOBID 15 CELLID 1
- Rebuilding seg 21 VOBID 16 CELLID 1
- Rebuilding seg 22 VOBID 17 CELLID 1
- Rebuilding seg 23 VOBID 18 CELLID 1
- Rebuilding seg 24 VOBID 19 CELLID 1

[k2002rahmani]

Yes, winny, that is a good point. But not many consider to try DVD-RB alone if an error occurs.

[Numer0bis]

For those with Runtime error 6:

I had the same Problem with an older version of dvd-rebuilder. As far as I could investigate at this time something went wrong while encoding. I also used the 2.7 branch of cce. If you use and older version like 2.66 oder 2.5 this Problem won't occur. Don't ask me why but that's what I found out

[gigah72]

is ist possible to add option to set or change BIAS for HC encoder?

[jdobbs]

Yes. I'll add that in one of the upcoming versions.

[ChickenMan]

I pesonally still like the original skin, my reasons why -

1. You can see all the Folder Path, VTS, Subpicture information etc on one screen instead of having to press tabs etc to see it,(waist of time in my view, pritty, but slower to use).
2. See 1. :)
My sentiments exactly, you cant beat Rochas original for simplicity, and I do like blue :D

[marpada]

Same problem with RC2 :scared:

I got a Run-Time error '6': Overflow during the rebuild phase

The DVD is U2 Elevation Tour Disc 2

[jdobbs]

Oh, well... that's one I'll have to keep looking for. I'll look for one of the discs that causes it. Is the U2 disc NTSC, R1? Could you do it from scratch, (with no pre, post, or intermediate third party processing of any kind) -- and see if it repeats?

[FilipeAmadeuO]

- Fixed "Runtime Error 6" that could happen when while interleaving ILVU objects.

That one fixed my error with Alien 3 (R2)
Thank you

PS - One strange thing that happens is that VTS_01_X.vob (movie) have very diferent sizes. I know that this is not a problem for playing the dvd but it´s not very normal (unless there is a layerbreak)

[jdobbs]

That is to prevent ILVU code from being split between two files. I put that special case in because I've been told it shouldn't happen. I have to say, I've seen it on original discs, though. If it becomes a problem I can remove it.

[FilipeAmadeuO]

I think that is no problem when the ILVU code is split between two files. All the originals that i have tried are like that.
For me i prefer all the files having the same file size. But please focus on more important things.

One more question:
- Is it possible to include in DVD Rebuilder and options do select/ non-select some PGC´s . I can explain why. Normaly some dvd´s have more than one PGC for VTS and in some cases one of the VTS is the trailer and i don´t want to reencode these VTS because normaly trailer´s have fadings scenes and CCE has some limitations on it.
I think it should work like dvdshrink.
What is your opinion ?

[jdobbs]

It wouldn't work just to use the Viewer/Editor and blank the trailer?

[FilipeAmadeuO]

I don´t want to blank the trailer.
I just want to not reencode it.

[jdobbs]

I see. There will be an option in a future version to select cells to keep without reencoding.

[FilipeAmadeuO]

That´s great. Thanks for your support.
DVD-Rebuilder is near perfect.

[marpada]

Yes, it's U2 - Elevation 2001 - Live from Boston R1 NTSC Disc 2.

I just rebuilted it with RC2, tonight I´ll do the whole process again and tell.


Oh, well... that's one I'll have to keep looking for. I'll look for one of the discs that causes it. Is the U2 disc NTSC, R1? Could you do it from scratch, (with no pre, post, or intermediate third party processing of any kind) -- and see if it repeats?

[marpada]

Did the whole thing from the begining but the same error :(


Yes, it's U2 - Elevation 2001 - Live from Boston R1 NTSC Disc 2.

I just rebuilted it with RC2, tonight I´ll do the whole process again and tell.

[jdobbs]

Thanks. I'll get it fixed.

[marpada]

Do you need me to send you extra info (.ifo, .ini, etc)?

Thanks. I'll get it fixed.

[FilipeAmadeuO]

- Fixed "Runtime Error 6" that could happen when while interleaving ILVU objects.

That one fixed my error with Alien 3 (R2)
Thank you

PS - One strange thing that happens is that VTS_01_X.vob (movie) have very diferent sizes. I know that this is not a problem for playing the dvd but it´s not very normal (unless there is a layerbreak)


I´ve tried this film on my players and sometimes it misses a chapter, freezes and flicks between versions. There probably some problem with the IFO´s after dvd-rebuilder. I tried to do an adjust vob pointers with ifoedit and the problem continues.