Please beta test this, thanks. (RC)

[chainsaw135]

thanks mrbass for the log files... i didnt think much of it when it stopped on me i was playing a game networked and also downloading like 3 or 4 things. I figured well maybe i pushed the system a bit hard... well i decided to clean up my system also do a fresh install of dvd2svcd and the extras...then re do the whole process well when i installed dvd2svcd i forgot 2 update well 2 make a long story a bit short, it finished and i never thought nothing about it...until i read this thread.

[dvd2svcd]

It's because I switched to -mp2enc instead of -2lame when executing Besweet. I was told by DSPGuru they did the exact same thing. But perhaps the -mp2enc switch didn't work in the Besweet version that came with build 2. Anyway, I have switced back to -2lame again. Sorry about that folks. I'll post an update soon (or maybe I'll just release build 3)

[R2D2]

Originally posted by dvd2svcd
It's because I switched to -mp2enc instead of -2lame when executing Besweet. I was told by DSPGuru they did the exact same thing. But perhaps the -mp2enc switch didn't work in the Besweet version that came with build 2. Anyway, I have switced back to -2lame again. Sorry about that folks. I'll post an update soon (or maybe I'll just release build 3)

that explains, maybe, the following:

doing a test with a chapter of 'amadeus'.
dvd2svcd 1.09b2 working fine;
1.09b3 pre 22 (with 2lame), working fine, too;
1.09b3 pre 24 (with mp2enc), no sound at all :-(

switched back to pre 22, & all is well :).

enjoy betatesting.

hope i did not do anything wrong, for my first post

logs below

--------------------------------------------------------
- 6/19/2002 8:22:59 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3 Pre 22
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/19/2002 8:23:01 PM
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x23 Language: Frangais
Subtitle found: StreamID: 0x22 Language: Frangais
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x20 Language: English

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 6/19/2002 8:23:05 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT
-OF=[D:\prelucrare\DVD2AVI_Project_file]
-IF=[D:\prelucrare\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/19/2002 8:23:18 PM
- Free on drive D: 5485.31 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 43

Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 6/19/2002 8:23:36 PM
- Free on drive D: 5483.91 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\prelucrare\Extracted_audio_1.ac3
Audio1 delay: -112 ms
Audio extraction finished.

--------------------------------------------------------
- 6/19/2002 8:23:47 PM
- Free on drive D: 5475.45 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\prelucrare\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input
"D:\prelucrare\Extracted_audio_1.ac3" -output
"D:\PRELUC~1\Encoded_audio_1.mp2" -logfile
"D:\PRELUC~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s
stereo -g max ) -ota( -d -112 -r 960 1001 ) -2lame( -e -b 224 -m s
)
Audio conversion of D:\prelucrare\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 6/19/2002 8:25:13 PM
- Free on drive D: 5479.16 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 771186864
AudioSectors: 5168576
VideoPAPO: 11866032
ScanOffsetBytes: 6641
SeqAligningBytes: 422041
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 1.00
PureMPEGStream: 753723570.83
Seconds: 182.08
CalcMPEGStream: 753723570.83
Frames: 4427
CDSize: 740.00
Cut point 735.00
Variable Settings:
Frames: 4427
Anti Noise Filter: 12
Passes: 4
Image Quality: 22
VAF file creation: On
Video Encoding Mode: CBR
Avg. Bitrate: 2230
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC.DLL")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.DLL")
mpeg2source("D:\PRELUC~1\DVD2AV~1.D2V")
AssumeFPS(25,1,True)
Sharpen(0.4)
BicubicResize(480,432,0,0.6)
AddBorders(0,72,0,72)
AvisynthSubtitler("D:\PRELUC~1\SUBS\","permsubs.txt")
----AVS End----

Closing program
CCE Max Speed: 0.380
Video Encoding finished.

--------------------------------------------------------
- 6/19/2002 8:33:39 PM
- Free on drive D: 5430.94 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/19/2002 8:33:41 PM
- Free on drive D: 5430.94 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/19/2002 8:33:43 PM
- Free on drive D: 5430.94 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 735 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe"
"D:\prelucrare\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 6/19/2002 8:34:07 PM
- Free on drive D: 5378.47 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: D:\prelucrare\bbMPEG_Muxed_File00.mpg
175.152 seconds D:\prelucrare\bbMPEG_Muxed_File00.mpg
Analyzing finished.

--------------------------------------------------------
- 6/19/2002 8:34:14 PM
- Free on drive D: 5378.46 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 1

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose
--cue-file="D:\prelucrare\CD_Image_File_CD1.cue"
--bin-file="D:\prelucrare\CD_Image_File_CD1.bin"
"D:\prelucrare\VCDXBuild_Script_1.xml"
CD-Image creation finished.

--------------------------------------------------------
- 6/19/2002 8:34:26 PM
- Free on drive D: 5376.45 mb
- SVCD Creation finished!
--------------------------------------------------------

--------------------------------------------------------
- 6/19/2002 8:03:44 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3 Pre 24
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/19/2002 8:03:45 PM
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x23 Language: Frangais
Subtitle found: StreamID: 0x22 Language: Frangais
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x20 Language: English

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 6/19/2002 8:03:51 PM
- Free on drive D: 5616.89 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- D:\Temp1\video_ts\VTS_01_1.vob
- D:\Temp1\video_ts\VTS_01_2.vob
- D:\Temp1\video_ts\VTS_01_3.vob
- D:\Temp1\video_ts\VTS_01_4.vob
- D:\Temp1\video_ts\VTS_01_5.vob

Ripping: D:\Temp1\video_ts\VTS_01_1.vob
Ripping finished. Speed: 2798

--------------------------------------------------------
- 6/19/2002 8:04:36 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT
-OF=[D:\prelucrare\DVD2AVI_Project_file]
-IF=[D:\prelucrare\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/19/2002 8:04:48 PM
- Free on drive D: 5496.59 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 43

Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 6/19/2002 8:05:00 PM
- Free on drive D: 5495.20 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\prelucrare\Extracted_audio_1.ac3
Audio1 delay: -112 ms
Audio extraction finished.

--------------------------------------------------------
- 6/19/2002 8:05:12 PM
- Free on drive D: 5486.73 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\prelucrare\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input
"D:\prelucrare\Extracted_audio_1.ac3" -output
"D:\PRELUC~1\Encoded_audio_1.mp2" -logfile
"D:\PRELUC~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s
stereo -g max ) -ota( -d -112 -r 960 1001 ) -mp2enc( -e -b 224 -m s
)
Audio conversion of D:\prelucrare\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 6/19/2002 8:06:52 PM
- Free on drive D: 5492.48 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 771186864
AudioSectors: 5168576
VideoPAPO: 11866032
ScanOffsetBytes: 6641
SeqAligningBytes: 422041
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 1.00
PureMPEGStream: 753723570.83
Seconds: 182.08
CalcMPEGStream: 753723570.83
Frames: 4427
CDSize: 740.00
Cut point 735.00
Variable Settings:
Frames: 4427
Anti Noise Filter: 12
Passes: 4
Image Quality: 22
VAF file creation: On
Video Encoding Mode: CBR
Avg. Bitrate: 2230
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC.DLL")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.DLL")
mpeg2source("D:\PRELUC~1\DVD2AV~1.D2V")
AssumeFPS(25,1,True)
Sharpen(0.4)
BicubicResize(480,432,0,0.6)
AddBorders(0,72,0,72)
AvisynthSubtitler("D:\PRELUC~1\SUBS\","permsubs.txt")
----AVS End----

Closing program
CCE Max Speed: 0.380
Video Encoding finished.

--------------------------------------------------------
- 6/19/2002 8:15:18 PM
- Free on drive D: 5444.25 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/19/2002 8:15:20 PM
- Free on drive D: 5444.25 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/19/2002 8:15:22 PM
- Free on drive D: 5444.25 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 735 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe"
"D:\prelucrare\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 6/19/2002 8:15:52 PM
- Free on drive D: 5396.52 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: D:\prelucrare\bbMPEG_Muxed_File00.mpg
0.000 seconds D:\prelucrare\bbMPEG_Muxed_File00.mpg
Analyzing finished.

--------------------------------------------------------
- 6/19/2002 8:15:59 PM
- Free on drive D: 5396.51 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 1

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose
--cue-file="D:\prelucrare\CD_Image_File_CD1.cue"
--bin-file="D:\prelucrare\CD_Image_File_CD1.bin"
"D:\prelucrare\VCDXBuild_Script_1.xml"
CD-Image creation finished.

--------------------------------------------------------
- 6/19/2002 8:16:07 PM
- Free on drive D: 5394.56 mb
- SVCD Creation finished!
--------------------------------------------------------

[dvd2svcd]

Please try this. If you don't report any major bugs this is the version that will be released in a couple of days:

http://212.88.77.140/D2S109B3.zip

[Flagg2001]

@DVD2SVCD:

I would convert Simpsons Season One to a MPEG 5.1 - SVCD.

This failure comes:

--------------------------------------------------------
- 21.06.2002 00:44:14
- Free on drive C: 9583.63 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: C:\svcd temp\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\svcd temp\Extracted_audio_1.ac3" -output "C:\SVCDTE~1\Encoded_audio_1.aif" -6chaiff -logfile "C:\SVCDTE~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -80 )
Audio conversion of C:\svcd temp\Extracted_audio_1.ac3 finished.


Converting Audio to MP2. Filename: C:\svcd temp\Extracted_audio_2.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\svcd temp\Extracted_audio_2.ac3" -output "C:\SVCDTE~1\Encoded_audio_2.aif" -6chaiff -logfile "C:\SVCDTE~1\Encoded_audio_2.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -96 )
Audio conversion of C:\svcd temp\Extracted_audio_2.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"" -l 2 -m s -n d -r 48.0 -b 160 -L -p 3 -e -v 0 "C:\svcd temp\Encoded_audio_1.aif" "C:\svcd temp\Encoded_audio_1"
Createprocess failed.
MPEG 5.1 encoding failed to execute. Please verify your Audio tab.
--------------------------------------------------------
- 21.06.2002 07:02:15
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3 Pre 24
--------------------------------------------------------
Initializing
Initializing finished.

I have copied the MPEG5.1 Encoder from this Thread to c:\programme\dvd2svcd\mpeg5.1


In Audio I have selectet Output: MPEG 5.1 and set MPEG-Encoder Path to the MPEG5.1 Directory.

I use 1.0.9 B3P24!

I hope the MPEG 5.1 SVCD runs on my Philips-DVD Player :)

Can you help me?

[dvd2svcd]

Originally posted by Flagg2001
@DVD2SVCD:

I would convert Simpsons Season One to a MPEG 5.1 - SVCD.

This failure comes:

--------------------------------------------------------
- 21.06.2002 00:44:14
- Free on drive C: 9583.63 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: C:\svcd temp\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\svcd temp\Extracted_audio_1.ac3" -output "C:\SVCDTE~1\Encoded_audio_1.aif" -6chaiff -logfile "C:\SVCDTE~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -80 )
Audio conversion of C:\svcd temp\Extracted_audio_1.ac3 finished.


Converting Audio to MP2. Filename: C:\svcd temp\Extracted_audio_2.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\svcd temp\Extracted_audio_2.ac3" -output "C:\SVCDTE~1\Encoded_audio_2.aif" -6chaiff -logfile "C:\SVCDTE~1\Encoded_audio_2.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -96 )
Audio conversion of C:\svcd temp\Extracted_audio_2.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"" -l 2 -m s -n d -r 48.0 -b 160 -L -p 3 -e -v 0 "C:\svcd temp\Encoded_audio_1.aif" "C:\svcd temp\Encoded_audio_1"
Createprocess failed.
MPEG 5.1 encoding failed to execute. Please verify your Audio tab.
--------------------------------------------------------
- 21.06.2002 07:02:15
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3 Pre 24
--------------------------------------------------------
Initializing
Initializing finished.

I have copied the MPEG5.1 Encoder from this Thread to c:\programme\dvd2svcd\mpeg5.1


In Audio I have selectet Output: MPEG 5.1 and set MPEG-Encoder Path to the MPEG5.1 Directory.

I use 1.0.9 B3P24!

I hope the MPEG 5.1 SVCD runs on my Philips-DVD Player :)

Can you help me? Please, there is a reason that I make a log file, yup, if something fails read it. Sorry if you feel I jump on this, but these kind posts is a bit annoying.

[Flagg2001]

@DVD2SVCD:

MPEG 5.1 encoding failed to execute. Please verify your Audio tab.

I have read this.
MPEG 5.1 is on c:\programme\dvd2svcd\mpeg5.1

I'm sure that I have set this path in the Audio-Tab.

I test it at the moment with anonther DVD.

sincerley,
Flagg

[dvd2svcd]

Executing MPEG51 Encoding. Commandline:
"" -l 2 -m s -n d -r 48.0 -b 160 -L -p 3 -e -v 0 "C:\svcd temp\Encoded_audio_1.aif" "C:\svcd temp\Encoded_audio_1"
Createprocess failed.
MPEG 5.1 encoding failed to execute. Please verify your Audio tab.I Gurantee you that you have not filled the "MPEG5.1 Encoder" input field in the audio tab :sly: What do you think should be between "" ?

[BaT]

Ur philips player, have also a internal decoder or only digital output? if u use digital output what type of surround ur amplifier has?

thx:)

[Flagg2001]

>Ur philips player, have also a internal decoder or only digital >output? if u use digital output what type of surround ur amplifier >has?

The Philips 711 DVD-Player has a Digital Output.
Amplifer: Kenwood Dolby Digital Amplifer!

[BaT]

Read here:
http://forum.doom9.org/showthread.php?threadid=27736

DSPguru said "your reciever must be able to decode mpeg2 mutlichannel. not all of them do.", i dont know if mean that must decode dolby digital, because mpeg2 multichannel isnt dobli digital... if i dont wrong:D

I d like buy hitachi 315E that read mpeg multichannel, but also me have kenwood with dolby digital n prologic, but i think doesn decode multichannel mpeg (but i d like to be wrong)

[R2D2]

made 2 quick tests with build 3. my usual choice is to keep the DVD chapters. the first test, even though the log file shows 2 chapters done, did not show chapters; the second test crashed in CCE, after 5 minutes of encoding. logs below

#1

--------------------------------------------------------
- 6/21/2002 11:28:16 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/21/2002 11:28:18 PM
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x23 Language: Français
Subtitle found: StreamID: 0x22 Language: Français
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x20 Language: English

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 6/21/2002 11:28:22 PM
- Free on drive D: 4670.80 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- D:\Temp1\video_ts\VTS_01_1.vob
- D:\Temp1\video_ts\VTS_01_2.vob
- D:\Temp1\video_ts\VTS_01_3.vob
- D:\Temp1\video_ts\VTS_01_4.vob
- D:\Temp1\video_ts\VTS_01_5.vob

Ripping: D:\Temp1\video_ts\VTS_01_1.vob
Ripping finished. Speed: 4154

--------------------------------------------------------
- 6/21/2002 11:29:41 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\prelucrare\DVD2AVI_Project_file] -IF=[D:\prelucrare\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/21/2002 11:30:06 PM
- Free on drive D: 4354.29 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 80

Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 6/21/2002 11:30:45 PM
- Free on drive D: 4351.82 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\prelucrare\Extracted_audio_1.ac3
Audio1 delay: -99 ms
Audio extraction finished.

--------------------------------------------------------
- 6/21/2002 11:31:36 PM
- Free on drive D: 4329.43 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\prelucrare\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\prelucrare\Extracted_audio_1.ac3" -output "D:\PRELUC~1\Encoded_audio_1.mp2" -logfile "D:\PRELUC~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s stereo -g max ) -ota( -d -99 -r 960 1001 ) -2lame( -e -b 224 -m s )
Audio conversion of D:\prelucrare\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 6/21/2002 11:35:00 PM
- Free on drive D: 4339.28 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 833934864
AudioSectors: 13448988
VideoPAPO: 12709764
ScanOffsetBytes: 17583
SeqAligningBytes: 1117497
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 1.00
PureMPEGStream: 806641027.67
Seconds: 473.88
CalcMPEGStream: 806641027.67
Frames: 11722
CDSize: 800.00
Cut point 795.00
Variable Settings:
Frames: 11722
Anti Noise Filter: 12
Passes: 4
Image Quality: 22
VAF file creation: On
Video Encoding Mode: CBR
Avg. Bitrate: 2350
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC.DLL")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.DLL")
mpeg2source("D:\PRELUC~1\DVD2AV~1.D2V")
AssumeFPS(25,1,True)
Sharpen(0.4)
BicubicResize(480,432,0,0.6)
AddBorders(0,72,0,72)
AvisynthSubtitler("D:\PRELUC~1\SUBS\","permsubs.txt")
----AVS End----

Closing program
CCE Max Speed: 0.390
Video Encoding finished.

--------------------------------------------------------
- 6/21/2002 11:55:38 PM
- Free on drive D: 4204.99 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/21/2002 11:55:40 PM
- Free on drive D: 4204.99 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/21/2002 11:55:42 PM
- Free on drive D: 4204.99 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\prelucrare\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 6/21/2002 11:57:29 PM
- Free on drive D: 4058.31 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: D:\prelucrare\bbMPEG_Muxed_File00.mpg
466.992 seconds D:\prelucrare\bbMPEG_Muxed_File00.mpg
Analyzing finished.

--------------------------------------------------------
- 6/21/2002 11:57:38 PM
- Free on drive D: 4058.30 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 2

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="D:\prelucrare\CD_Image_File_CD1.cue" --bin-file="D:\prelucrare\CD_Image_File_CD1.bin" "D:\prelucrare\VCDXBuild_Script_1.xml"
CD-Image creation finished.

--------------------------------------------------------
- 6/21/2002 11:58:21 PM
- Free on drive D: 4055.16 mb
- SVCD Creation finished!
--------------------------------------------------------

#2
--------------------------------------------------------
- 6/22/2002 6:04:30 AM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/22/2002 6:04:33 AM
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x23 Language: Français
Subtitle found: StreamID: 0x22 Language: Français
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x20 Language: English

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 6/22/2002 6:04:38 AM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\prelucrare\DVD2AVI_Project_file] -IF=[D:\prelucrare\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/22/2002 6:05:05 AM
- Free on drive D: 4204.46 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 80

Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 6/22/2002 6:05:48 AM
- Free on drive D: 4201.99 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\prelucrare\Extracted_audio_1.ac3
Audio1 delay: -99 ms
Audio extraction finished.

--------------------------------------------------------
- 6/22/2002 6:06:45 AM
- Free on drive D: 4179.60 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\prelucrare\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\prelucrare\Extracted_audio_1.ac3" -output "D:\PRELUC~1\Encoded_audio_1.mp2" -logfile "D:\PRELUC~1\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s stereo -g max ) -ota( -d -99 -r 960 1001 ) -2lame( -e -b 224 -m s )
Audio conversion of D:\prelucrare\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 6/22/2002 6:10:46 AM
- Free on drive D: 4189.45 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 833934864
AudioSectors: 13448988
VideoPAPO: 12709764
ScanOffsetBytes: 17583
SeqAligningBytes: 1117497
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 1.00
PureMPEGStream: 806641027.67
Seconds: 473.88
CalcMPEGStream: 806641027.67
Frames: 11722
CDSize: 800.00
Cut point 795.00
Variable Settings:
Frames: 11722
Anti Noise Filter: 12
Passes: 4
Image Quality: 22
VAF file creation: On
Video Encoding Mode: CBR
Avg. Bitrate: 2350
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC.DLL")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.DLL")
mpeg2source("D:\PRELUC~1\DVD2AV~1.D2V")
AssumeFPS(25,1,True)
Sharpen(0.4)
BicubicResize(480,432,0,0.6)
AddBorders(0,72,0,72)
AvisynthSubtitler("D:\PRELUC~1\SUBS\","permsubs.txt")
----AVS End----

[mrbass]

cce crashes are probably Anti Noise Filter: 12 due to that setting.

anyway 1.0.9 build 3 is perfect as far as I can tell...worked great
you have my vote to fire when ready. And yes chapters worked too.


--------------------------------------------------------
- 6/21/02 9:50:20 AM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

blah blah blah

- 6/21/02 9:58:56 AM
- Free on drive H: 58184.53 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: H:\eiga\shadowlands\audio\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "H:\eiga\shadowlands\audio\Extracted_audio_1.ac3" -output "H:\eiga\SHADOW~1\audio\Encoded_audio_1.mp2" -logfile "H:\eiga\SHADOW~1\audio\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -67 ) -2lame( -e -b 192 -m s )
Audio conversion of H:\eiga\shadowlands\audio\Extracted_audio_1.ac3 finished.

blah blah blah

--------------------------------------------------------
- 6/21/02 5:53:21 PM
- Free on drive H: 51584.60 mb
- SVCD Creation finished!
--------------------------------------------------------

[dvd2svcd]

Originally posted by Bach
Hi DVD2SVCD,

I'm far from a professional beta tester nowadays. However, I have found one in my first test with RC version. Unsing the CVD resolution, there is no permanent subtitle plugin neither avisynth subtitler in the avs file. However, the bmp files were created (but the permsub.txt not). I have used "recover".

BTW: the CVD resolution is a nice improvement.:) Strange I just tested this and it worked. Please post your dvd2svcd.ini file here.

[avdmb]

This is a funny one ! I tried the beta24 release, to rip my 1st NTSC DVD to PAL, 1st time with CVD size option, all the rest as before. It failed due to the fact the requested mp2 encoding stereo at 192 kb/s ... became a mp3 encoding at 128 kb/s :confused:

BeSweet v1.3b12 logfile.
--------------------------
Logging start : 06/23/02 , 22:50:02.

C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3 -output C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2 -logfile C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log ) -azid( -L -3db -c normal -g max ) -ota( -d 25 -r 960 1001 ) -mp2enc( -e -b 192 -m s )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3
[00:00:00:000] | Output: C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:025] +-------- AZID -------
[00:00:00:025] | Output Stereo mode: Dolby surround compatible
[00:00:00:025] | Total Gain: 9.1dB, Compression: Normal
[00:00:00:025] | LFE levels: To LR -3.0dB, To LFE 0.0dB
[00:00:00:025] | Center mix level: BSI
[00:00:00:025] | Surround mix level: BSI
[00:00:00:025] | Dialog normalization: No
[00:00:00:025] | Rear channels filtering: No
[00:00:00:025] | Source Sample-Rate: 48.0KHz
[00:00:00:025] +-------- FRC --------
[00:00:00:025] | Source Frame-Rate: 1001
[00:00:00:025] | Dest. Frame-Rate: 960
[00:00:00:025] +-------- LAME -------
[00:00:00:025] | Bitrate method : CBR
[00:00:00:025] | MP3 bitrate : 128
[00:00:00:025] | Channels Mode : Joint Stereo
[00:00:00:025] | Error Protection: No
[00:00:00:025] +---------------------
[00:05:37:113] Conversion Completed !
[00:05:37:113] Actual Avg. Bitrate : 122kbps
[00:04:34:000] <-- Transcoding Duration
Logging ends : 06/23/02 , 22:54:36.

Last week, I manually made trials using lame to produce mp3 128 kb/s output (seems some people suceeded to make non standard SVCD with mp3 audio and play them on a Pioneer DV-444). I nevertheless deleted the whole "Movie" directory since then. Can this problem be linked to that or is it a bug ? It is anyhow strange that the last option in the besweet command is -mp2enc (was before -2lame in v1.0.9b2). Thanks in advance for your help. avdmb.

[dvd2svcd]

@avdmb: Please search the thread first:

http://forum.doom9.org/showthread.php?s=&postid=144476#post144476

And then:
http://forum.doom9.org/showthread.php?s=&postid=144531#post144531

[avdmb]

@dvd2svcd, thanks (I missed the B3 announcement). Now time to go to sleep :cool:

[sandchar99]

Quick question:

Is the Build 3 that was available thru this thread now the same that is at the DVD2SVCD homepage?

I just want avoid causing further congestion at the DVD2SVCD homepage if I do not have to download it again.

Thanks

sandchar99

OOOPS!!: I meant to post this under the "Please beta test this, thanks. (RC)" thread.

MODS: please delete this or answer it or move it to that thread.

(sorry)

[Caleb]

Hey DVD2SVCD, I tried the MPEG 5.1 option, the result was a SVCD with 6 channels but with only the front speaker channels working (L & R). I have a Philips 707 DVD Player with build in 5.1 decoder, and of course I'm using I-Author. If you put the disc on the player, it gives you a "MPEG 6 CH" display(with a stereo SVCD it says "MPEG 2 CH") but all the sound it's mixed at the front speakers :confused:. With the previous version of besweet, it gave you the same L & R channels but the center channel was mixed in the R channel only :confused: :confused:.
Here's my log, and thank you for all the hard work you did in this program.

--------------------------------------------------------
- 21/06/2002 04:27:45 p.m.
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 21/06/2002 04:27:47 p.m.
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x20 Language: Portugues
Subtitle found: StreamID: 0x22 Language: English
Subtitle found: StreamID: 0x21 Language: Español

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
2 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 21/06/2002 04:28:24 p.m.
- Free on drive D: 7540.80 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_1.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_2.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_3.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_4.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_5.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_6.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_7.vob
- D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_8.vob

Ripping: D:\DVD\HARRY_POTTER_PHILOSOPHERS_STON\VTS_01_2.vob
Ripping finished. Speed: 1624

--------------------------------------------------------
- 21/06/2002 04:29:31 p.m.
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Video Programs\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Video Programs\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\WORK\DVD2AVI_Project_file] -IF=[D:\WORK\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 21/06/2002 04:29:39 p.m.
- Free on drive D: 7436.08 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 29
SVCD Stream no: 2 Language: Español Num. of subs: 30

Saving Subtitles ini file
--------------------------------------------------------
- 21/06/2002 04:29:43 p.m.
- Free on drive D: 7435.50 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\WORK\Extracted_audio_1.ac3
Audio1 delay: -12 ms
Audio extraction finished.

--------------------------------------------------------
- 21/06/2002 04:29:51 p.m.
- Free on drive D: 7428.26 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\WORK\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Video Programs\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\WORK\Extracted_audio_1.ac3" -output "D:\WORK\Encoded_audio_1.aif" -6chaiff -logfile "D:\WORK\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -12 )
Audio conversion of D:\WORK\Extracted_audio_1.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"C:\Video Programs\DVD2SVCD\MPEG5.1\pub_enc.exe" -l 2 -m s -n d -r 48.0 -b 224 -L -p 3 -e -v 0 "D:\WORK\Encoded_audio_1.aif" "D:\WORK\Encoded_audio_1"
MPEG 5.1 encoding of D:\WORK\Encoded_audio_1.aif finished.

Audio conversion finished.

--------------------------------------------------------
- 21/06/2002 04:30:49 p.m.
- Free on drive D: 7357.42 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Documents and Settings\Caleb Temple\My Documents\My Pictures\k.new.bmp
Converting: C:\Video Programs\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 21/06/2002 04:30:58 p.m.
- Free on drive D: 7356.64 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 832891388
AudioSectors: 3987984
VideoPAPO: 12840156
ScanOffsetBytes: 3899
SeqAligningBytes: 247790
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 248668
EmptySectors: 238.00
PictureSectors: 150.00
PureMPEGStream: 815562886.80
Seconds: 140.51
CalcMPEGStream: 815562886.80
Frames: 3249
CDSize: 799.00
Cut point 798.00
Variable Settings:
Frames: 3249
Anti Noise Filter: Off
Passes: 4
Image Quality: 17
VAF file creation: On
Video Encoding Mode: One Pass VBR
Q. Factor: 5
Min. bitrate: 300
Max. bitrate: 2230
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\VIDEOP~1\DVD2SVCD\SIMPLE~1\SIMPLE~1.DLL")
LoadPlugin("C:\VIDEOP~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("D:\WORK\DVD2AV~1.D2V")
SimpleResize(480,480)
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 1.010
Video Encoding finished.

--------------------------------------------------------
- 21/06/2002 04:33:52 p.m.
- Free on drive D: 7320.29 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Video Programs\DVD2SVCD\pulldown\pulldown.exe" "D:\WORK\Encoded_Video_CCE_NTSC.mpv" "D:\WORK\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
- 21/06/2002 04:34:04 p.m.
- Free on drive D: 7284.77 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Video Programs\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 21/06/2002 04:34:06 p.m.
- Free on drive D: 7284.77 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Video Programs\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 21/06/2002 04:34:08 p.m.
- Free on drive D: 7284.77 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Video Programs\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 798 mb

Executing RunbbMPEG. Commandline:
"C:\Video Programs\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\WORK\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 21/06/2002 04:34:18 p.m.
- Free on drive D: 7245.54 mb
- Demuxing
--------------------------------------------------------
Demuxing: D:\WORK\bbMPEG_Muxed_File00.mpg
Demuxing finished.

--------------------------------------------------------
- 21/06/2002 04:34:24 p.m.
- Free on drive D: 7246.37 mb
- Creating CD-Images using I-Author
--------------------------------------------------------
Saving Subtitle Timecodes.
SVCD subtitles.
Length of D:\WORK\bbMPEG_Muxed_File00 Stream 1.mp2
133
Executing I-Author Muxer.
Multiplexing:
- D:\WORK\bbMPEG_Muxed_File00.mpv
- D:\WORK\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\WORK\Subs\en1-1.txt
- D:\WORK\Subs\en1-1.txt
- D:\WORK\Subs\es2-1.txt
- D:\WORK\Subs\es2-1.txt
- D:\WORK\IAuthor_Muxed_File0.MPS
Multiplexing finished.

Closing program
Executing I-Author. Creating CD-Image filename:
- D:\WORK\CD_Image_File_CD1.cif
Closing program
CD-Image creation finished.

--------------------------------------------------------
- 21/06/2002 04:35:17 p.m.
- Free on drive D: 7205.18 mb
- SVCD Creation finished!
--------------------------------------------------------

[gerti67]

@sandchar99:

Quick answer, I think it's not the same, as the new one is a little bigger in filesize, but dvd2svcd can be more specific on that. ;)

Greets,
Gerti

[sandchar99]

@gerti67

However, the size difference could be the difference between an uncompressed EXE file and a ZIP file.

sandchar99

Thanks for moving this post

[gerti67]

@sandchar99:

I know, I was speaking in both cases of the filesize of the "D2S109B3.exe" - the bundle installer not any ZIP files. ;)

Greets,
Gerti

[dvd2svcd]

The only difference is that I updated BeSweet.

[baker]

Tell me dvd2svcd is this a bug or just a fix for bbmpeg.

A lot of ppl (me included) while using dvd2svcd in conjunction with my guide:
http://forum.vcdhelp.com/userguides/98376.php

Have found that dvd2svcd makes a forth useless image file. Now this is completely harmless as once as you don't burn it. But just wondering is it a bug or just a fix for the last version which crashed a lot in bbmpeg?

Thanks a lot,
Baker

[mrbass]

Mr. DVD2SVCD (I remember someone called you sir once and you flipped off the handle :rolleyes: it was classic)you should delete that beta zip bundle from your website and/or edit your first post in this thread to removed reference to it.

@baker..nice guide btw...anyway within this thread you'll see a post by dvd2svcd made on June 20th

"It's because I switched to -mp2enc instead of -2lame when executing Besweet. I was told by DSPGuru they did the exact same thing. But perhaps the -mp2enc switch didn't work in the Besweet version that came with build 2. Anyway, I have switced back to -2lame again. Sorry about that folks. I'll post an update soon (or maybe I'll just release build 3)"

[wizard327]

Hello guys,
Tried the 5.1 option and everything seems fine until I checked the .cif file in my folder.Nothing was there.I assume that instead of cue/bin files generated when using vcdxbuild,.cif files are generated which are then burned.Please correct me if I am wrong.If somehow the I-author program failed to generate the cif files,how do I make/restore it?Is there also a way to restore the project using Vcdxbuild?Also,which software shall I use to preview and/or burn the files.Shall appreciate your help as this is the first time I used I-author/5.1 option.Below is my log file:
--------------------------------------------------------
- 6/25/02 8:14:57 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/25/02 8:15:00 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[C:\Program Files\DVD2SVCD\Movie\DVD2AVI_Project_file] -IF=[C:\Program Files\DVD2SVCD\Movie\Vts_03_1.vob,C:\Program Files\DVD2SVCD\Movie\Vts_03_2.vob,C:\Program Files\DVD2SVCD\Movie\Vts_03_3.vob,C:\Program Files\DVD2SVCD\Movie\Vts_03_4.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/25/02 8:20:48 PM
- Free on drive C: 23471.13 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3
Audio1 delay: 4 ms
Audio extraction finished.

--------------------------------------------------------
- 6/25/02 8:28:32 PM
- Free on drive C: 23148.87 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3" -output "C:\PROGRA~1\DVD2SVCD\MOVIE\Encoded_audio_1.aif" -6chaiff -logfile "C:\PROGRA~1\DVD2SVCD\MOVIE\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d 4 )
Audio conversion of C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"C:\Program Files\DVD2SVCD\MPEG5.1\pub_enc.exe" -l 2 -m s -n d -r 48.0 -b 192 -L -p 3 -e -v 0 "C:\Program Files\DVD2SVCD\Movie\Encoded_audio_1.aif" "C:\Program Files\DVD2SVCD\Movie\Encoded_audio_1"
MPEG 5.1 encoding of C:\Program Files\DVD2SVCD\Movie\Encoded_audio_1.aif finished.

Audio conversion finished.

--------------------------------------------------------
- 6/25/02 9:11:13 PM
- Free on drive C: 19696.11 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Program Files\DVD2SVCD\DefaultTitlepicture.bmp
Converting: C:\Program Files\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 6/25/02 9:11:21 PM
- Free on drive C: 19695.33 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 1658810776
AudioSectors: 146944196
VideoPAPO: 23419620
ScanOffsetBytes: 173603
SeqAligningBytes: 11033422
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 300.00
PureMPEGStream: 1477239926.80
Seconds: 6040.91
CalcMPEGStream: 1477239926.80
Frames: 144669
CDSize: 796.00
Cut point 796.00
Variable Settings:
Frames: 144669
Anti Noise Filter: Off
Passes: 2
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 1956
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC.DLL")
mpeg2source("C:\PROGRA~1\DVD2SVCD\MOVIE\DVD2AV~1.D2V")
BicubicResize(480,360,0,0.75)
TemporalSmoother(2,1)
AddBorders(0,60,0,60)
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 0.850
Video Encoding finished.

--------------------------------------------------------
- 6/26/02 3:09:51 AM
- Free on drive C: 18256.63 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "C:\Program Files\DVD2SVCD\Movie\Encoded_Video_CCE_NTSC.mpv" "C:\Program Files\DVD2SVCD\Movie\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
- 6/26/02 3:15:37 AM
- Free on drive C: 16853.31 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/26/02 3:15:40 AM
- Free on drive C: 16853.30 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/26/02 3:15:42 AM
- Free on drive C: 16853.30 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
Length of C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File00.mpg
3076 Seconds
Offset in Seconds: 3078
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 6/26/02 3:30:09 AM
- Free on drive C: 15275.29 mb
- Demuxing
--------------------------------------------------------
Demuxing: C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File00.mpg
Demuxing: C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File01.mpg
Demuxing finished.

--------------------------------------------------------
- 6/26/02 3:34:08 AM
- Free on drive C: 13733.09 mb
- Creating CD-Images using I-Author
--------------------------------------------------------
Executing I-Author Muxer.
Multiplexing:
- C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File00.mpv
- C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File00 Stream 1.mp2
- C:\Program Files\DVD2SVCD\Movie\IAuthor_Muxed_File0.MPS
Multiplexing finished.

Closing program
Executing I-Author. Creating CD-Image filename:
- C:\Program Files\DVD2SVCD\Movie\CD_Image_File_CD1.cif
Closing program
Executing I-Author Muxer.
Multiplexing:
- C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File01.mpv
- C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File01 Stream 1.mp2
- C:\Program Files\DVD2SVCD\Movie\IAuthor_Muxed_File1.MPS
Multiplexing finished.

Closing program
Executing I-Author. Creating CD-Image filename:
- C:\Program Files\DVD2SVCD\Movie\CD_Image_File_CD2.cif
Closing program
CD-Image creation finished.

--------------------------------------------------------
- 6/26/02 3:49:09 AM
- Free on drive C: 12160.18 mb
- SVCD Creation finished!
--------------------------------------------------------

Thanks,

[hexhex]

I try to rip a DVD to a SVCD with 5.1 multichannel mpeg with the new version 1.0.9 build 3.

Works great for me, but if dvd2svd starts the i-author demuxer i have a problem here:
mux starts, then mux gives a warning: Maximum bitrate is 2754000, will not be acceptable!
and then dvd2svcd starts mux again and again and again...

here is the log:
--------------------------------------------------------
- 25.06.2002 14:59:45
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 25.06.2002 14:59:48
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\dvd\DVD2AVI_Project_file] -IF=[F:\vid\neu\vts_01_1.vob,F:\vid\neu\vts_01_2.vob,F:\vid\neu\vts_01_3.vob,F:\vid\neu\vts_01_4.vob,F:\vid\neu\vts_01_5.vob]
Framerate: 25000
DVD2AVI processing done.

--------------------------------------------------------
- 25.06.2002 15:08:54
- Free on drive D: 18985.14 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\dvd\Extracted_audio_1.ac3
Audio1 delay: 0 ms
Audio extraction finished.

--------------------------------------------------------
- 25.06.2002 15:19:07
- Free on drive D: 18683.61 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\dvd\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\dvd\Extracted_audio_1.ac3" -output "D:\dvd\Encoded_audio_1.aif" -6chaiff -logfile "D:\dvd\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max )
Audio conversion of D:\dvd\Extracted_audio_1.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"C:\Programme\DVD2SVCD\MPEG5.1\pub_enc.exe" -l 2 -m s -n d -r 48.0 -b 224 -L -p 3 -e -v 0 "D:\dvd\Encoded_audio_1.aif" "D:\dvd\Encoded_audio_1"
MPEG 5.1 encoding of D:\dvd\Encoded_audio_1.aif finished.

Audio conversion finished.

--------------------------------------------------------
- 25.06.2002 16:24:51
- Free on drive D: 15431.40 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Programme\DVD2SVCD\DefaultTitlepicture.bmp
Converting: C:\Programme\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 25.06.2002 16:25:01
- Free on drive D: 15430.62 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 1667177176
AudioSectors: 160421072
VideoPAPO: 23340456
ScanOffsetBytes: 211721
SeqAligningBytes: 13456014
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 300.00
PureMPEGStream: 1469747905.50
Seconds: 5652.88
CalcMPEGStream: 1469747905.50
Frames: 141147
CDSize: 800.00
Cut point 800.00
Variable Settings:
Frames: 141147
Anti Noise Filter: Off
Passes: 3
Image Quality: 5
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 2079
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("D:\dvd\DVD2AV~1.D2V")
BicubicResize(480,432,0,0.75)
TemporalSmoother(2,1)
AddBorders(0,72,0,72)
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 0.840
Video Encoding finished.

--------------------------------------------------------
- 25.06.2002 23:56:14
- Free on drive D: 13997.20 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 25.06.2002 23:56:16
- Free on drive D: 13997.20 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 25.06.2002 23:56:18
- Free on drive D: 13997.20 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 800 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\dvd\bbMPEG_Muxed_File.mpg"
Length of D:\dvd\bbMPEG_Muxed_File00.mpg
2772 Seconds
Offset in Seconds: 2774
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 800 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\dvd\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 26.06.2002 00:14:19
- Free on drive D: 12408.54 mb
- Demuxing
--------------------------------------------------------
Demuxing: D:\dvd\bbMPEG_Muxed_File00.mpg
Demuxing: D:\dvd\bbMPEG_Muxed_File01.mpg
Demuxing finished.

--------------------------------------------------------
- 26.06.2002 00:18:31
- Free on drive D: 10858.07 mb
- Creating CD-Images using I-Author
--------------------------------------------------------
Executing I-Author Muxer.
Multiplexing:
- D:\dvd\bbMPEG_Muxed_File00.mpv
- D:\dvd\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\dvd\IAuthor_Muxed_File0.MPS
Closing program
OGT First time over error detected. Fixing in progress.

Executing I-Author Muxer.
Multiplexing:
- D:\dvd\bbMPEG_Muxed_File00.mpv
- D:\dvd\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\dvd\IAuthor_Muxed_File0.MPS
Closing program
OGT First time over error detected. Fixing in progress.

Executing I-Author Muxer.
Multiplexing:
- D:\dvd\bbMPEG_Muxed_File00.mpv
- D:\dvd\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\dvd\IAuthor_Muxed_File0.MPS
Closing program
OGT First time over error detected. Fixing in progress.

Executing I-Author Muxer.
Multiplexing:
- D:\dvd\bbMPEG_Muxed_File00.mpv
- D:\dvd\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\dvd\IAuthor_Muxed_File0.MPS
Closing program
OGT First time over error detected. Fixing in progress.

Executing I-Author Muxer.
Multiplexing:
- D:\dvd\bbMPEG_Muxed_File00.mpv
- D:\dvd\bbMPEG_Muxed_File00 Stream 1.mp2
- D:\dvd\IAuthor_Muxed_File0.MPS
Closing program
OGT First time over error detected. Fixing in progress.

And so on...

Can anyone help me??

[avdmb]

Your problem is neither related to dvd2svcd beta version nor 5.1 audio. Simply, Video max bitrate 2530 + audio bitrate 224 = 2754 > SVCD max of 2748. I-Author is extremely picky about this, and won't accept non-standard SVCD bitrates. 2 solutions : lower video bitrrate to 2500 (keep some margin versus theoretical max, as both CEE and TMPGEnc are not so strict with respecting max bitrate) or use another muxer.

[BaT]

I try to backup a dvd, but when is time to mux it... ever appar this error, but before show a window with this phrase BBMEPG ERROR "mux start time is greater than the total time 1251 seconds"

- Crash Recovery
- Restarting from: Muxing and Cutting
--------------------------------------------------------
- 29/06/2002 11.38.54
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: D:\Programmi\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 29/06/2002 11.38.56
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: D:\Programmi\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 29/06/2002 11.38.58
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: D:\Programmi\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 800 mb

Executing RunbbMPEG. Commandline:
"D:\Programmi\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\Programmi\DVD2SVCD\Movie01\bbMPEG_Muxed_File.mpg"
Length of D:\Programmi\DVD2SVCD\Movie01\bbMPEG_Muxed_File00.mpg
7452 Seconds
Offset in Seconds: 7454
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 800 mb

Executing RunbbMPEG. Commandline:
"D:\Programmi\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\Programmi\DVD2SVCD\Movie01\bbMPEG_Muxed_File.mpg"
Access violation at address 0049160C in module 'DVD2SVCD.exe'. Read of address 03BA8001

[hitch]

I have same prob as WIZARD237. CIF files not created. When I try to create image manually from I-Author, I get an error that size available required exceeds available. I have 76 gig left, stil get the error. Strange. My max bitrate is set to 2528, Audio @ 192. This is less than MAx SVCD standard. Not sure what do to next. :(

--------------------------------------------------------
- 6/29/2002 9:55:04 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/29/2002 9:55:07 PM
- Free on drive F: 84870.26 mb
- vStrip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- E:\VIDEO_TS\VTS_01_1.vob
- E:\VIDEO_TS\VTS_01_2.vob
- E:\VIDEO_TS\VTS_01_3.vob
- E:\VIDEO_TS\VTS_01_4.vob
- E:\VIDEO_TS\VTS_01_5.vob
- E:\VIDEO_TS\VTS_01_6.vob

Saving the vStrip filelist:
- F:\movierip\vStrip.lst

Executing vStrip. Commandline:
"C:\Multimedia\DVD2SVCD\vStrip\vStrip.exe" @"F:\movierip\vStrip.lst" -i"F:\movierip\VTS_01_0.IFO" -j1 -$1024 -p0 -o"F:\movierip\VTS_01.vob"
--------------------------------------------------------
- 6/29/2002 10:06:10 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Multimedia\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Multimedia\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[F:\movierip\DVD2AVI_Project_file] -IF=[F:\movierip\VTS_01_1.vob,F:\movierip\VTS_01_2.vob,F:\movierip\VTS_01_3.vob,F:\movierip\VTS_01_4.vob,F:\movierip\VTS_01_5.vob,F:\movierip\VTS_01_6.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 6/29/2002 10:08:35 PM
- Free on drive F: 79533.05 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: F:\movierip\Extracted_audio_1.ac3
Audio1 delay: -67 ms
Audio extraction finished.

--------------------------------------------------------
- 6/29/2002 10:16:01 PM
- Free on drive F: 79145.59 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: F:\movierip\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Multimedia\BeSweetGUI0.6b49\BeSweet.exe" -core( -input "F:\movierip\Extracted_audio_1.ac3" -output "F:\movierip\Encoded_audio_1.aif" -6chaiff -logfile "F:\movierip\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d -67 )
Audio conversion of F:\movierip\Extracted_audio_1.ac3 finished.

Executing MPEG51 Encoding. Commandline:
"C:\Multimedia\DVD2SVCD\MPEG5.1\pub_enc.exe" -l 2 -m s -n d -r 48.0 -b 192 -L -p 3 -e -v 0 "F:\movierip\Encoded_audio_1.aif" "F:\movierip\Encoded_audio_1"
MPEG 5.1 encoding of F:\movierip\Encoded_audio_1.aif finished.

Audio conversion finished.

--------------------------------------------------------
- 6/29/2002 10:24:59 PM
- Free on drive F: 79145.59 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Multimedia\DVD2SVCD\cover1.jpg
Converting: C:\Multimedia\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 6/29/2002 10:25:11 PM
- Free on drive F: 79144.80 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 1658810776
AudioSectors: 176644916
VideoPAPO: 22959540
ScanOffsetBytes: 208734
SeqAligningBytes: 13266205
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 300.00
PureMPEGStream: 1445731372.67
Seconds: 7261.96
CalcMPEGStream: 1445731372.67
Frames: 173945
CDSize: 796.00
Cut point 796.00
Variable Settings:
Frames: 173945
Anti Noise Filter: 2
Passes: 4
Image Quality: 22
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2528
Avg. Bitrate: 1592
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\MULTIM~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("F:\movierip\DVD2AV~1.D2V")
Sharpen(0.4)
BicubicResize(352,480,0,0.75)
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 0.940
Video Encoding finished.

--------------------------------------------------------
- 6/30/2002 9:09:28 AM
- Free on drive F: 77726.25 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Multimedia\DVD2SVCD\pulldown\pulldown.exe" "F:\movierip\Encoded_Video_CCE_NTSC.mpv" "F:\movierip\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
--------------------------------------------------------
- 6/30/2002 12:07:21 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 6/30/2002 12:07:24 PM
- Free on drive F: 73617.40 mb
- Crash Recovery
- Restarting from: Muxing and Cutting
--------------------------------------------------------
- 6/30/2002 12:07:28 PM
- Free on drive F: 73617.39 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Multimedia\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/30/2002 12:07:31 PM
- Free on drive F: 73617.39 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Multimedia\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 6/30/2002 12:07:35 PM
- Free on drive F: 73617.39 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Multimedia\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Multimedia\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\movierip\bbMPEG_Muxed_File.mpg"
Length of F:\movierip\bbMPEG_Muxed_File00.mpg
3576 Seconds
Offset in Seconds: 3578
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Multimedia\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\movierip\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 6/30/2002 12:14:15 PM
- Free on drive F: 72037.43 mb
- Demuxing
--------------------------------------------------------
Demuxing: F:\movierip\bbMPEG_Muxed_File00.mpg
Demuxing: F:\movierip\bbMPEG_Muxed_File01.mpg
Demuxing finished.

--------------------------------------------------------
- 6/30/2002 12:16:39 PM
- Free on drive F: 70494.94 mb
- Creating CD-Images using I-Author
--------------------------------------------------------
Executing I-Author Muxer.
Multiplexing:
- F:\movierip\bbMPEG_Muxed_File00.mpv
- F:\movierip\bbMPEG_Muxed_File00 Stream 1.mp2
- F:\movierip\IAuthor_Muxed_File0.MPS
Multiplexing finished.

Closing program
Executing I-Author. Creating CD-Image filename:
- F:\movierip\CD_Image_File_CD1.cif
Closing program
Executing I-Author Muxer.
Multiplexing:
- F:\movierip\bbMPEG_Muxed_File01.mpv
- F:\movierip\bbMPEG_Muxed_File01 Stream 1.mp2
- F:\movierip\IAuthor_Muxed_File1.MPS
Multiplexing finished.

Closing program
Executing I-Author. Creating CD-Image filename:
- F:\movierip\CD_Image_File_CD2.cif
Closing program
CD-Image creation finished.

--------------------------------------------------------
- 6/30/2002 12:23:55 PM
- Free on drive F: 68921.76 mb
- SVCD Creation finished!
--------------------------------------------------------

[allx]

Originally posted by hitch
I have same prob as WIZARD237. CIF files not created. When I try to create image manually from I-Author, I get an error that size available required exceeds available. I have 76 gig left, stil get the error. Strange. My max bitrate is set to 2528, Audio @ 192. This is less than MAx SVCD standard. Not sure what do to next. :(



The same here :devil:
After 5 days of attempt I'm unable to get I-Autor to work.

I think that some other tool is needed to build the images !
Building an image from a one .VOB don't give me "space" errors but the cif image is not working :devil:
In this case CDMage, but also WinISO, reports that the image is corrupted.

[Caleb]

@hitch

If you're using Win2K/XP go to the I-Author folder, select the program executable, right click on it, choose properties, then choose the "compatibility" tab, select the "Run this program in compatibility mode for" box, and make sure it says "Windows 95". That should fix your problem. :D

[hitch]

@caleb

I'd have never thought of that, but in retrospect it makes sense. Thanks, I'll try it, hope it works.

PS
Turns out I can only see compatibility mode in Windows 2000 if I right click on the shortcut for the program. Right clicknig on the executable file itself doesn't show the compatibility option. Weird. I'll try to see if this solves it and let folks know.

[allx]

The problem with disk space is disappeared, but the .cif images still don't works :(
I can open the .cif only with ISOBUSTER. Yesterday I have installed Easy CD Creator 5 for direct burning of cdxxx.cif.
My Philips DVD 722 recognize the disc as an audio CD with two tracks !!!
My Lite-ON DVD can read it as "blank"...

Any tips can help :-)

[dvd2svcd]

Have you tried to convert it to bin/cue using CDMage ?

[allx]

Yes.
After this I have done some attempts to convert the .cif using WINISO. But it reports that the image is broken. With Isobuster I can see the SVCD structure, but this software can't covert between ISO, CIF, NRG..

I have done many attempts using CBR and VBR, with CCE and TMPEG, and also with only one 5.1 language/audio tracks :-(

[Labersack]

@allx
It has been a long time since I used IAuthor and have to deal wif .cif, but if I remeber right, only EasyCDCreator 4.x can handle the cif form IAuthor, ver.5 will fail.
But you can convert them with CDMage (I use ver. 1.02.1 beta5, beta is important, other versions will give an error) and burn with CDRwin, Fireburner, Nero etc.

[DSPguru]

Originally posted by dvd2svcd
It's because I switched to -mp2enc instead of -2lame when executing Besweet. I was told by DSPGuru they did the exact same thing. But perhaps the -mp2enc switch didn't work in the Besweet version that came with build 2. Anyway, I have switced back to -2lame again. Sorry about that folks. I'll post an update soon (or maybe I'll just release build 3) just tested it, and it works fine. but only since v1.4b...

[dvd2svcd]

Yes, that is true, but you see in my beta releases I hadn't updated BeSweet som many of the users were still using 1.3x ;)

[allx]

Originally posted by Labersack
@allx
It has been a long time since I used IAuthor and have to deal wif .cif, but if I remeber right, only EasyCDCreator 4.x can handle the cif form IAuthor, ver.5 will fail.
But you can convert them with CDMage (I use ver. 1.02.1 beta5, beta is important, other versions will give an error) and burn with CDRwin, Fireburner, Nero etc.

Many thanks but CDMage 1.02.1 beta5 can't convert cif images created by IAuthor on my system :-(
Only Isobuster can open this .cif, but the files can't be extracted.

bye and many thanks
Alessandro