MeGUI Bug-Report Thread - Page 15

dumbas.. · 25th January 2006, 06:16

@ChronoCross

Thanks for the reply and Link post
Tried 1/19/06 (result below) and the other two in the link with the same result.

Unfortunately....

Yes, you guessed, they did not crash

but still gave the error

Starting job job1 at 05:00:23
Job is a mux job. Commandline:
-add "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui video.mp4" -add "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui audio.mp4":lang=eng -new "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\blah.mp4"
successfully set up muxer
Processing ended at 05:00:24
----------------------------------------------------------------------------------------------------------

Log for job job1

IsoMedia import - track ID 1 - Video (size 640 x 272)
Unknown input file type
Error importing C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui audio.mp4:lang=eng: Feature Not Supported
(Feature Not Supported)

Grrrrrr, IS IT ME ?

ChronoCross · 25th January 2006, 06:27

What audio encoding are you using?

puffpio · 25th January 2006, 07:53

Quote:

Originally Posted by berrinam

Can you test this in 0.2.3.2041 when it is released? I _think_ I fixed it there, but your testing again would be appreciated.

yes.. I will definately test it once it is released

dumbas.. · 25th January 2006, 14:56

Quote:

Originally Posted by ChronoCross

What audio encoding are you using?

AAC via Besweet,FAAC.exe & dll

See output log
http://forum.doom9.org/showthread.ph...305#post774305

Tried to anticipate your next and changed Besweet from ver dated 17 May 2005 to that used in Staxrip ver 1.5b31

All seems ok now on test vob. I will try a full DVD and see what happens.

Hope I won't be troubling you again (fingers crossed)

The Link · 25th January 2006, 16:09

Probably a mistake/misunderstanding on my side but could it be that the one-click encoder is broken, i.e. if i click "go" only the dgindex job is sent to the job queue.

Raithmir · 25th January 2006, 16:18

2033 shutdown after encoding box on the queue tab seems to only work if you click it before you start processing.

dimzon · 25th January 2006, 16:36

Quote:

Originally Posted by The Link

Probably a mistake/misunderstanding on my side but could it be that the one-click encoder is broken, i.e. if i click "go" only the dgindex job is sent to the job queue.

Yes, you are mistaken. We does'nt need count && names of the output of dgindex job so we can't add all of them at once. When dgindex job was finished special postprocessing code will be invoked. This code analyzes dgindex output via folder scan and add encoding/mux jobs to queue

Doom9 · 25th January 2006, 16:38

Quote:

Probably a mistake/misunderstanding on my side but could it be that the one-click encoder is broken, i.e. if i click "go" only the dgindex job is sent to the job queue

There's a German saying I like "Probieren geht über Studieren". Try it and see what happens. Hint: MeGUI as currently incapable of creating video jobs without the AviSynth input being present.. and that input only exists once the indexing job has been run.

Quote:

2033 shutdown after encoding box on the queue tab seems to only work if you click it before you start processing.

Could you elaborate this a bit? What exactly can be done to reproduce the problem, starting with the double click on megui.exe.

The Link · 25th January 2006, 16:43

Hmm ... well, after the dgindex job has finished megui (2045) simply silently quits and that's it (shutdown after encoding is not activated).

edit2: could the problem be that the extracted audiotrack is a wav file?

dimzon · 25th January 2006, 16:56

Quote:

Originally Posted by The Link

could the problem be that the extracted audiotrack is a wav file?

I'm not shure (i'm not take close look @ this part of code) but i guess you are right - problem is wav audio...

The Link · 25th January 2006, 16:58

Yepp, just tested another source with ac3 audio, which works. The culprit seems to be pcm audio extracted to a wav file by dgindex.

ChronoCross · 25th January 2006, 18:43

The only DVD's I've seen that use wav audio are the anime ones I import from japan. What kind of DVD's are these?

The Link · 25th January 2006, 18:46

Quote:

Originally Posted by ChronoCross

The only DVD's I've seen that use wav audio are the anime ones I import from japan. What kind of DVD's are these?

I used a simple music video from my massive attack DVD. Music videos on DVD often have pcm audio afaik.

Doom9 · 25th January 2006, 19:48

iirc (and without looking at the sources), I think the "find audio after dgindex" routine only looks for ac3 files.. it probably b0rks when there's none found even though you chose to demux something. I should definitely have a look but then again, right now I have to spend that free time on other things.

berrinam · 25th January 2006, 22:16

Actually, it *should* pick up wav audio, too:

Code:

					if (file.IndexOf(trackNumber) != -1 &&
                        (file.EndsWith(".ac3") || 
                         file.EndsWith(".mp3") ||
                         file.EndsWith(".mp2") ||
                         file.EndsWith(".mpa") ||
                         file.EndsWith(".dts") ||
                         file.EndsWith(".wav"))) // It is the right track
					{
						audioFiles.Add(file);
					}

However, that code is case sensitive, which means it requires the extension to be in lower case (that's the bug).

@The Link: What is the filename of your wav audio?

The Link · 25th January 2006, 22:25

The filename is "VTS_01_1 T01 48K 16bit 2ch.wav". Perhaps there is another reason then.

berrinam · 25th January 2006, 22:32

Hmm.... weird..... it *should* pick it up. Could you upload a small sample, just so I can test a VOB-with-PCM?

stax76 · 25th January 2006, 22:50

Hehe, I think the apps that create upper case want to test other apps which just to easiliy fall over that. Recently I got some feedback that DVD Decrypter demuxed files (upper case) won't mux with DivXMux (needs lower case!). Being warned I searched then my code for 'EndsWith' and was embarrassed to find how often I was using 'EndsWith' for file extension comparison.

berrinam · 26th January 2006, 00:40

Quote:

Originally Posted by The Link

The filename is "VTS_01_1 T01 48K 16bit 2ch.wav". Perhaps there is another reason then.

Found and fixed: it was looking for the delay, and crashed when it didn't say it in the filename. Fixed in 0.2.3.2050.

L4z4rus · 26th January 2006, 11:50

Since 0.2.3.2048 (now using .2050) I seem to keep getting this message when clicking the Preview button in the Avisynth script generator window (to update Video Preview after using resize).

I haven't had any problems in the past, and the initial preview opens fine after loading a d2v file:

The file LoadPlugin("C:\Program Files\Media\DGIndex\dgdecode.dll")
mpeg2source("C:\DVD\24-08\VTS_01_1.d2v")
#blank deinterlace line
#crop
LanczosResize(640,352)
#denoise
cannot be opened

Unable to load DLL 'AvisynthWrapper': The specified module could not be found

The script opens fine in Virtual Dub, Media Player etc. & I have Helix YUV codecs installed / FFDShow (setup as per guide).

25th January 2006, 16:09	#285 \| Link
The Link Registered User Join Date: Nov 2001 Location: Germany Posts: 189	Probably a mistake/misunderstanding on my side but could it be that the one-click encoder is broken, i.e. if i click "go" only the dgindex job is sent to the job queue. __________________ When birds burp, it must taste like bugs! (Calvin&Hobbes)

25th January 2006, 16:43	#289 \| Link
The Link Registered User Join Date: Nov 2001 Location: Germany Posts: 189	Hmm ... well, after the dgindex job has finished megui (2045) simply silently quits and that's it (shutdown after encoding is not activated). edit2: could the problem be that the extracted audiotrack is a wav file? __________________ When birds burp, it must taste like bugs! (Calvin&Hobbes) Last edited by The Link; 25th January 2006 at 16:48.

25th January 2006, 16:58	#291 \| Link
The Link Registered User Join Date: Nov 2001 Location: Germany Posts: 189	Yepp, just tested another source with ac3 audio, which works. The culprit seems to be pcm audio extracted to a wav file by dgindex. __________________ When birds burp, it must taste like bugs! (Calvin&Hobbes)

25th January 2006, 19:48	#294 \| Link
Doom9 clueless n00b Join Date: Oct 2001 Location: somewhere over the rainbow Posts: 10,579	iirc (and without looking at the sources), I think the "find audio after dgindex" routine only looks for ac3 files.. it probably b0rks when there's none found even though you chose to demux something. I should definitely have a look but then again, right now I have to spend that free time on other things. __________________ For the web's most comprehensive collection of DVD backup guides go to www.doom9.org

25th January 2006, 22:16	#295 \| Link
berrinam Registered User Join Date: Apr 2005 Posts: 1,740	Actually, it should pick up wav audio, too: Code: if (file.IndexOf(trackNumber) != -1 && (file.EndsWith(".ac3") \|\| file.EndsWith(".mp3") \|\| file.EndsWith(".mp2") \|\| file.EndsWith(".mpa") \|\| file.EndsWith(".dts") \|\| file.EndsWith(".wav"))) // It is the right track { audioFiles.Add(file); } However, that code is case sensitive, which means it requires the extension to be in lower case (that's the bug). @The Link: What is the filename of your wav audio?

25th January 2006, 06:16	#281 \| Link
dumbas.. Its all in the name.... Join Date: Oct 2005 Location: Northern Hemishere, I think.. Posts: 33	@ChronoCross Thanks for the reply and Link post Tried 1/19/06 (result below) and the other two in the link with the same result. Unfortunately.... Yes, you guessed, they did not crash but still gave the error Starting job job1 at 05:00:23 Job is a mux job. Commandline: -add "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui video.mp4" -add "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui audio.mp4":lang=eng -new "C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\blah.mp4" successfully set up muxer Processing ended at 05:00:24 ---------------------------------------------------------------------------------------------------------- Log for job job1 IsoMedia import - track ID 1 - Video (size 640 x 272) Unknown input file type Error importing C:\Documents and Settings\Brian\My Documents\DVD\MEgui Output\megui audio.mp4:lang=eng: Feature Not Supported (Feature Not Supported) Grrrrrr, IS IT ME ?

25th January 2006, 06:27	#282 \| Link
ChronoCross Does it really matter? Join Date: Jun 2004 Location: Chicago, IL Posts: 1,542	What audio encoding are you using?

25th January 2006, 16:18	#286 \| Link
Raithmir Registered User Join Date: Dec 2003 Posts: 51	2033 shutdown after encoding box on the queue tab seems to only work if you click it before you start processing.

25th January 2006, 18:43	#292 \| Link
ChronoCross Does it really matter? Join Date: Jun 2004 Location: Chicago, IL Posts: 1,542	The only DVD's I've seen that use wav audio are the anime ones I import from japan. What kind of DVD's are these?

25th January 2006, 22:25	#296 \| Link
The Link Registered User Join Date: Nov 2001 Location: Germany Posts: 189	The filename is "VTS_01_1 T01 48K 16bit 2ch.wav". Perhaps there is another reason then. __________________ When birds burp, it must taste like bugs! (Calvin&Hobbes)

25th January 2006, 22:32	#297 \| Link
berrinam Registered User Join Date: Apr 2005 Posts: 1,740	Hmm.... weird..... it should pick it up. Could you upload a small sample, just so I can test a VOB-with-PCM?

25th January 2006, 22:50	#298 \| Link
stax76 Registered User Join Date: Jun 2002 Location: On thin ice Posts: 6,837	Hehe, I think the apps that create upper case want to test other apps which just to easiliy fall over that. Recently I got some feedback that DVD Decrypter demuxed files (upper case) won't mux with DivXMux (needs lower case!). Being warned I searched then my code for 'EndsWith' and was embarrassed to find how often I was using 'EndsWith' for file extension comparison. __________________ https://github.com/stax76/software-list https://www.youtube.com/@stax76/playlists

26th January 2006, 11:50	#300 \| Link
L4z4rus Registered User Join Date: Jul 2005 Location: UK Posts: 7	Cannot Open Video input error Since 0.2.3.2048 (now using .2050) I seem to keep getting this message when clicking the Preview button in the Avisynth script generator window (to update Video Preview after using resize). I haven't had any problems in the past, and the initial preview opens fine after loading a d2v file: The file LoadPlugin("C:\Program Files\Media\DGIndex\dgdecode.dll") mpeg2source("C:\DVD\24-08\VTS_01_1.d2v") #blank deinterlace line #crop LanczosResize(640,352) #denoise cannot be opened Unable to load DLL 'AvisynthWrapper': The specified module could not be found The script opens fine in Virtual Dub, Media Player etc. & I have Helix YUV codecs installed / FFDShow (setup as per guide). Last edited by L4z4rus; 26th January 2006 at 11:55.