RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 427

subair37 · 22nd September 2010, 15:16

Hi

Can i use this software to write m2ts to a dvd-R disk.Please tell me what is this software useful for?

benjyv · 22nd September 2010, 15:19

---------------------------------------------------------------------------------

Format : BDAV
Format/Info : Blu-ray Video
File size : 17.4 GiB
Duration : 1h 11mn
Overall bit rate : 34.7 Mbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : 27
Duration : 1h 11mn
Bit rate mode : Variable
Maximum bit rate : 33.3 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

Audio #1
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Muxing mode : Blu-ray
Codec ID : 128
Duration : 1h 11mn
Bit rate mode : Constant
Bit rate : 4 608 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 96.0 KHz
Bit depth : 24 bits
Stream size : 2.31 GiB (13%)

Audio #2
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Format profile : TrueHD / Core
Mode extension : CM (complete main)
Muxing mode : Stream extension
Codec ID : 131
Duration : 1h 11mn
Bit rate mode : Variable / Constant
Bit rate : Variable / 640 Kbps
Maximum bit rate : 6 840 Kbps / 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 96.0 KHz / 48.0 KHz
Bit depth : 16 bits

Text #1
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

Text #2
ID : 4609 (0x1201)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

Text #3
ID : 4610 (0x1202)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

Text #4
ID : 4611 (0x1203)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

Text #5
ID : 4612 (0x1204)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

Text #6
ID : 4613 (0x1205)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Video delay : 2s 2ms

====================================

Where is the mistake or what should I do to solve the problem ???

Lighto · 22nd September 2010, 17:18

Hi Atak, will you consider making RipBot support .rmvb as the input file in the future?

Chipps · 22nd September 2010, 17:18

Quote:

Originally Posted by Atak_Snajpera

@Chipps

Thank you. That worked.

Atak_Snajpera · 22nd September 2010, 18:28

Quote:

Hi Atak, will you consider making RipBot support .rmvb as the input file in the future?

yes if this http://forum.doom9.org/showthread.php?t=143228 will be implemented in ffdshow

Quote:

Where is the mistake or what should I do to solve the problem ???

show me demuxlog.txt from ../Job1/ folder

Lighto · 22nd September 2010, 18:43

Quote:

Originally Posted by Atak_Snajpera

yes if this http://forum.doom9.org/showthread.php?t=143228 will be implemented in ffdshow

Will you consider adding the support before it is implemented in ffdshow?

I am sure many of the users can live with installing real alternative to use RipBot264 to encode .rmvb source until ffdshow supports .rmvb.

Pretty please?

benjyv · 22nd September 2010, 19:19

Quote:

Originally Posted by Atak_Snajpera

show me demuxlog.txt from ../Job1/ folder

eac3to v3.22
command line: "C:\Program Files\Tools\eac3to\eac3to.exe" "C:\Documents and Settings\mustBeMe\Desktop\00006.m2ts" 1: "J:\temp\RipBot264temp\job1\video.mkv" -seekToIFrames 3: "J:\temp\RipBot264temp\job1\audio_Undetermined.thd.w64" -down16 -progressnumbers -log="J:\temp\RipBot264temp\job1\demuxlog.txt"
------------------------------------------------------------------------------
M2TS, 1 video track, 2 audio tracks, 6 subtitle tracks, 1:11:52, 60i /1.001
1: h264/AVC, 1080i60 /1.001 (16:9)
2: RAW/PCM, 2.0 channels, 24 bits, 96kHz
3: TrueHD/AC3, 5.1 channels, 96kHz, dialnorm: -27dB
(embedded: AC3, 5.1 channels, 640kbps, 48kHz, dialnorm: -27dB)
4: Subtitle (PGS)
5: Subtitle (PGS)
6: Subtitle (PGS)
7: Subtitle (PGS)
8: Subtitle (PGS)
9: Subtitle (PGS)
[v01] Extracting video track number 1...
[a03] Extracting audio track number 3...
[a03] Extracting TrueHD stream...
[a03] Removing TrueHD dialog normalization...
[a03] Decoding with libav/ffmpeg...
[a03] Reducing depth from 24 to 16 bits...
[a03] Writing W64...
[a03] The libav decoder reported error -1 while decoding. <ERROR>
[v01] Muxing video to Matroska...
Aborted at file position 1048576. <ERROR>

muhadi · 22nd September 2010, 20:51

Atak_Snajpera

Thank you to each one problem solved! but for some reason when I load in some movies RipBot program does not see the audio track? have to separately add an audio track! tell me how to make the program to see any audio tracks?

Atak_Snajpera · 23rd September 2010, 11:24

Quote:

but for some reason when I load in some movies RipBot program does not see the audio track?

What does "some movies" mean exactly? Do I have to guess?

@benjyv
update eac3to and try again.

This is also weird

Quote:

Aborted at file position 1048576

Aborted exactly at 1GB/1MB (!?)

@lighto
send me some .rmvb samples to www.mediafire.com

muhadi · 23rd September 2010, 12:57

Atak_Snajpera
In some films had to download the audio track separately! how and what you want to configure the program to download any movies from Adio tracks

Lighto · 23rd September 2010, 14:16

Quote:

Originally Posted by Atak_Snajpera

Aborted exactly at 1GB/1MB (!?)

@lighto
send me some .rmvb samples to www.mediafire.com

http://www.mediafire.com/?e7yqnta2zcuim23
Thanks for accepting my request!

It contains 2 sample, 1 with cook audio and 1 with raac audio.

Hope it's not too much to ask, but do you mind adding this feature to the to-do list for future version of RipBot264?

Quote:

Originally Posted by stasi

Hey Atak

quick question: Will it be possible in a future release to add a job while encoding? It takes a long time for me to add 24 episodes to the queue list, in this time one episode can be finished encoding.

benjyv · 23rd September 2010, 17:09

Quote:

Originally Posted by Atak_Snajpera

update eac3to and try again.

Which is the shortest way ???
I've downloaded the new version of eac3to within C:\Program Files\Megui\Tools....
I've kept the old version too....
Scuze me , but I don't know how to update this soft

All the time I had troubles with this soft

or tell me how to check within Ripbot if the update was made.....
Should I delete and re install Ripbot to take new updates into account ???
I'm a lil confused

Thanks !!

muhadi · 24th September 2010, 06:56

As long as you answered I decided the problem! how to configure the program to make quicker convertible?

patmann03 · 26th September 2010, 05:56

How can I fix the audio of a damaged source

Code:

[v02] The MKV file was created without making use of the gap/overlap information.  <WARNING>
[v02] Please check whether audio is in sync. If it is in sync everything is fine.  <WARNING>
[v02] Otherwise ask eac3to to repeat the muxing. It will then automatically make  <WARNING>
[v02] use of the detailed gap/overlap information.  <WARNING>
[a03] Audio has a gap of 544ms at playtime 0:08:04.  <WARNING>
[a03] Starting 2nd pass...
[a03] Realizing (E-)AC3 gaps...
[a03] Creating file "M:\temp\RipBot264temp\job2\audio_English.ac3"...
Added fps value (24 /1.001) to MKV header.
Video track 2 contains 142787 frames.
eac3to processing took exactly 5 minutes.
Done.

The audio becomes out of sync where the issue occurs. Anyway to correct it?

pacaveli211 · 26th September 2010, 15:23

split the track at the gap and add some delay to the second part
or find some blank audio to add in
or....try demuxing with TSmuxer as it should not do anything with the gap (except maybe say it's there)

patmann03 · 26th September 2010, 18:06

Ya, I got it thanks. I split the track and remuxed while adjusting the audio... which took a bit of trial and error to get correct. Then I merged and remuxed.

benjyv · 26th September 2010, 18:41

@pacaveli211

Can you help me , too ????

I've downloaded eac3to - last version - and I want to know if it was installed iwithin Ripbot...If it was made the update..

thanks!!

pacaveli211 · 26th September 2010, 19:26

get the latest version from: http://forum.doom9.org/showthread.php?t=125966
extract contents to: RipBot264\Tools\eac3to

benjyv · 27th September 2010, 07:45

When I installed last version of Ripbot it makes just 2 files : Ripbot.exe and Ripbot.ini....Where could be Tools ???
I've extract it into Megui\tools\eac3to...I hope will work , even it says that is a 2008 version

Why is so old ???

Lighto · 27th September 2010, 13:36

Quote:

Originally Posted by benjyv

When I installed last version of Ripbot it makes just 2 files : Ripbot.exe and Ripbot.ini....Where could be Tools ???
I've extract it into Megui\tools\eac3to...I hope will work , even it says that is a 2008 version

Why is so old ???

Don't you have all these folders?

27th September 2010, 07:45	#8539 \| Link
benjyv Registered User Join Date: Oct 2009 Posts: 212	When I installed last version of Ripbot it makes just 2 files : Ripbot.exe and Ripbot.ini....Where could be Tools ??? I've extract it into Megui\tools\eac3to...I hope will work , even it says that is a 2008 version Why is so old ??? Last edited by benjyv; 27th September 2010 at 08:00.

22nd September 2010, 15:16	#8521 \| Link
subair37 Registered User Join Date: Aug 2010 Posts: 118	Hi Can i use this software to write m2ts to a dvd-R disk.Please tell me what is this software useful for?

22nd September 2010, 15:19	#8522 \| Link
benjyv Registered User Join Date: Oct 2009 Posts: 212	--------------------------------------------------------------------------------- Format : BDAV Format/Info : Blu-ray Video File size : 17.4 GiB Duration : 1h 11mn Overall bit rate : 34.7 Mbps Maximum Overall bit rate : 48.0 Mbps Video ID : 4113 (0x1011) Menu ID : 1 (0x1) Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 3 frames Codec ID : 27 Duration : 1h 11mn Bit rate mode : Variable Maximum bit rate : 33.3 Mbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 29.970 fps Standard : NTSC Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : MBAFF Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177 Transfer characteristics : BT.709-5, BT.1361 Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177 Audio #1 ID : 4352 (0x1100) Menu ID : 1 (0x1) Format : PCM Format settings, Endianness : Big Format settings, Sign : Signed Muxing mode : Blu-ray Codec ID : 128 Duration : 1h 11mn Bit rate mode : Constant Bit rate : 4 608 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 96.0 KHz Bit depth : 24 bits Stream size : 2.31 GiB (13%) Audio #2 ID : 4353 (0x1101) Menu ID : 1 (0x1) Format : AC-3 Format/Info : Audio Coding 3 Format profile : TrueHD / Core Mode extension : CM (complete main) Muxing mode : Stream extension Codec ID : 131 Duration : 1h 11mn Bit rate mode : Variable / Constant Bit rate : Variable / 640 Kbps Maximum bit rate : 6 840 Kbps / 640 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 96.0 KHz / 48.0 KHz Bit depth : 16 bits Text #1 ID : 4608 (0x1200) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms Text #2 ID : 4609 (0x1201) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms Text #3 ID : 4610 (0x1202) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms Text #4 ID : 4611 (0x1203) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms Text #5 ID : 4612 (0x1204) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms Text #6 ID : 4613 (0x1205) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Video delay : 2s 2ms ==================================== Where is the mistake or what should I do to solve the problem ???

22nd September 2010, 17:18	#8523 \| Link
Lighto The Black Reaper Join Date: Nov 2009 Posts: 320	Hi Atak, will you consider making RipBot support .rmvb as the input file in the future?

22nd September 2010, 20:51	#8528 \| Link
muhadi Registered User Join Date: Sep 2010 Posts: 25	Atak_Snajpera Thank you to each one problem solved! but for some reason when I load in some movies RipBot program does not see the audio track? have to separately add an audio track! tell me how to make the program to see any audio tracks?

23rd September 2010, 12:57	#8530 \| Link
muhadi Registered User Join Date: Sep 2010 Posts: 25	Atak_Snajpera In some films had to download the audio track separately! how and what you want to configure the program to download any movies from Adio tracks

24th September 2010, 06:56	#8533 \| Link
muhadi Registered User Join Date: Sep 2010 Posts: 25	As long as you answered I decided the problem! how to configure the program to make quicker convertible?

26th September 2010, 15:23	#8535 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	split the track at the gap and add some delay to the second part or find some blank audio to add in or....try demuxing with TSmuxer as it should not do anything with the gap (except maybe say it's there)

26th September 2010, 18:06	#8536 \| Link
patmann03 Registered User Join Date: Aug 2010 Posts: 15	Ya, I got it thanks. I split the track and remuxed while adjusting the audio... which took a bit of trial and error to get correct. Then I merged and remuxed.

26th September 2010, 18:41	#8537 \| Link
benjyv Registered User Join Date: Oct 2009 Posts: 212	@pacaveli211 Can you help me , too ???? I've downloaded eac3to - last version - and I want to know if it was installed iwithin Ripbot...If it was made the update.. thanks!!

26th September 2010, 19:26	#8538 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	get the latest version from: http://forum.doom9.org/showthread.php?t=125966 extract contents to: RipBot264\Tools\eac3to