Media Player Classic Home Cinema (MPC-HC) - DXVA! - Page 524

Egh · 14th November 2009, 12:23

Quote:

Originally Posted by boiled_sugar

Hi

I tried weightp, the new feature of x264, but MPC-HC can't decode the encoded video correctly with DXVA. ffdshow decodes the video correctly.

Works here on 1337 build and XP x64. Obviously on VMR9 only, as mpchc doesn't really support EVR on my system....

BTW guys, congratulations on releasing a leet build 1337

Px · 14th November 2009, 15:33

Ok, got some free time to make bugreport
MPC HC doesn't show subtitles on some BD (Ip Man in my case)
File info

Code:

General
ID                               : 1
Complete name                    : H:\New\Ip.Man.2008.1080p.H264.Remux\BDMV\STREAM\00001.m2ts
Format                           : BDAV
Format/Info                      : Blu-ray Video
File size                        : 22.0 GiB
Duration                         : 1h 46mn
Overall bit rate                 : 29.6 Mbps
Maximum Overall bit rate         : 35.5 Mbps

Video
ID                               : 4113 (0x1011)
Menu ID                          : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : High@L4.1
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Duration                         : 1h 46mn
Width                            : 1 920 pixels
Height                           : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                       : 24.000 fps
Resolution                       : 24 bits
Colorimetry                      : 4:2:0
Scan type                        : Progressive
Color primaries                  : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics         : BT.709-5, BT.1361
Matrix coefficients              : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

Audio #1
ID                               : 4352 (0x1100)
Menu ID                          : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Duration                         : 1h 46mn
Bit rate mode                    : Constant
Bit rate                         : 384 Kbps
Channel(s)                       : 6 channels
Channel positions                : Front: L C R, Surround: L R, LFE
Sampling rate                    : 48.0 KHz
Stream size                      : 292 MiB (1%)
Language                         : Russian /  / 

Audio #2
ID                               : 4353 (0x1101)
Menu ID                          : 1 (0x1)
Format                           : DTS
Format/Info                      : Digital Theater Systems
Format profile                   : MA
Duration                         : 1h 46mn
Bit rate mode                    : Variable
Channel(s)                       : 8 channels
Channel positions                : Front: L C R, Surround: L C C R, LFE
Sampling rate                    : 48.0 KHz
Resolution                       : 16 bits
Language                         : Chinese /  / 

Text #1
ID                               : 4608 (0x1200)
Menu ID                          : 1 (0x1)
Format                           : PGS
Language                         : English /  / 

Text #2
ID                               : 4609 (0x1201)
Menu ID                          : 1 (0x1)
Format                           : PGS
Language                         : Chinese /  /

OS - Win XP x64, Video - ATI with latest drivers, DX up to date. Haali media splitter detects subtitle streams, but when I select one of them, produces error:

Internal splitter also doesn't help and it's behavior depends on revision:
1) b1249 detects all subtitle streams right, but doesn't show

2) b1326 incorrectly detects language of secondary stream

3) b1337 doesn't detect subtitle streams at all

Bug exists independent on opening m2ts file, index.bdmv or "Open DVD"
With PowerDVD subtitles shows fine

Opuz Klass · 14th November 2009, 17:07

Hi there guys!

MPC-HC is crashing with Intel GMA500 graphics chipset when trying to play any video using EVR-CP in Windows 7. I would like to help you by providing you with minidumps but I'm not finding them. I've confirmed this behavior in several laptops using this chipset with Windows 7 (latest drivers).

therealjoeblow · 14th November 2009, 18:48

Would it be possible to add a shader that "smart-stretches" 4:3 media content to 16:9 similar to the way that PowerDVD does for DVD material, ie, where the center 1/3 of the image remains mostly undistorted, and the bulk of the stretching is done in the outer thirds, more towards the edges of the video frame? Kind of like projecting the image onto a cylinder...

Snowknight26 · 14th November 2009, 19:42

http://mpc-hc.svn.sourceforge.net/vi...7&pathrev=1338

Wouldn't it be more appropriate if the stream names were "MPEG-2" instead of "MPEG 2", "H.264" instead of "H264", "Secondary DTS-HD High Resolution Audio" instead of "Secondary DTS HD High Resolution Audio", and "VC-1" instead of "VC1?"

tetsuo55 · 14th November 2009, 19:52

Quote:

Originally Posted by Snowknight26

http://mpc-hc.svn.sourceforge.net/vi...7&pathrev=1338

Wouldn't it be more appropriate if the stream names were "MPEG-2" instead of "MPEG 2", "H.264" instead of "H264", "Secondary DTS-HD High Resolution Audio" instead of "Secondary DTS HD High Resolution Audio", and "VC-1" instead of "VC1?"

should be easy to fix, please open a ticket on trac so it can be discussed and done

https://sourceforge.net/apps/trac/mpc-hc/newticket

Mangix · 14th November 2009, 20:51

boiled_sugar's sample works on my computer. using XP 32-bit, VMR9, DXVA, 195.39 GeForce drivers

kieranrk · 14th November 2009, 21:36

Quote:

Originally Posted by therealjoeblow

Would it be possible to add a shader that "smart-stretches" 4:3 media content to 16:9 similar to the way that PowerDVD does for DVD material, ie, where the center 1/3 of the image remains mostly undistorted, and the bulk of the stretching is done in the outer thirds, more towards the edges of the video frame? Kind of like projecting the image onto a cylinder...

Please watch your DVDs in their correct aspect ratios.

Egh · 15th November 2009, 03:59

tetsuo55:

do you think it would be a worthy feature is there was a method to override a sub style with default?

I know the styles can be edited on-the-fly, but if you want to revert a style to one's default choice, you have to adjust font, scaling, several colours, outline/shadow size etc. An "override" button in that tabsheet would be handy, imo. I'm so annoyed by some "creativity" styles that I quite so often just override them manually.

tetsuo55 · 15th November 2009, 09:04

Quote:

Originally Posted by Egh

tetsuo55:

do you think it would be a worthy feature is there was a method to override a sub style with default?

I know the styles can be edited on-the-fly, but if you want to revert a style to one's default choice, you have to adjust font, scaling, several colours, outline/shadow size etc. An "override" button in that tabsheet would be handy, imo. I'm so annoyed by some "creativity" styles that I quite so often just override them manually.

yeah a "display all text based subtitles as standard SRT" would probably be a good feature.

You can add it to the tracker, but we have no coders who want to work on adding this right now.

easyfab · 15th November 2009, 09:58

@boiled_sugar : I've the same problem on my Ati HD 2600 with mpc dxva and pdvd dxva : so it's an Ati bug, I hope it's only a driver problem and not hardware.

littleD · 15th November 2009, 11:22

I have ati and have corruption too.
BTw whats that anime?

donaldtone · 15th November 2009, 14:22

wishilist:
1. update ogglib in ogg Directshow splitter to support more formats: like Kate stream.
2. add Kate format subtitle support to subtitle render engine.

Then mpc-hc can completely support new version of ogv format. This format is totally free and theora, vorbis and kate are patent free codecs. Right now only VLC can support its subtitle.

tetsuo55 · 16th November 2009, 00:29

i have run mpc-hc through the microsoft application verifier and it fails quite a few tests.

This is a call to all coders, please help us fix the crashes and memory leaks.

the verifier can be downloaded here:
http://www.microsoft.com/downloads/d...DisplayLang=en

The tests that give errors and cause crashes are:
Handles, Heaps, locks, low resource, LuaPriv and DangerousAPi

the goal should be to have an error free (and warning free) result with all tests enabled.

---------------

EDIT:

Also /SAFESEH fails to complete, some precompiled parts need to be recompiled with vs2008 with the /SAFESEH switch before MPC-HC itself can be compiled with it

---------------

EDIT2:

/DYNAMICBASE, /NXCOMPAT should be added by default (and /SAFESEH once that has been fixed)

Also /RTC1, /Od can be used to find out more about the memory leaks/crashes and if you happen to have a enterprise version of vs2008 /analyse will give even more info

-----------

EDIT3:

Some data:
On my systems:
about 80% of allocated ram is unused/leaked by mpc-hc
mpc-hc leaks 4kb/s during playback
during playback 200MB+ of pagefile is allocated and heavily used (many pagefaults)

Cleaned with no movie mpc-hc only uses 700kb of ram, uncleaned it uses 13MB and with a movie the lowest i've seen is 40MB(18MB cleaned)

boiled_sugar · 16th November 2009, 02:46

I'm sorry. The corruption turned out to be x264 bug. Now it's fixed.

Quote:

BTw whats that anime?

Tegami Bachi

Opuz Klass · 16th November 2009, 03:41

tetsuo55,

Have you read my report in post 10489 of this thread? Please let me know how I can help you solving this problem.

Thanks

betaking · 16th November 2009, 03:45

Hi,why Complete Last mpc-hc give me error:
MEDIASUBTYPE_DVB_SUBTITLES not defined.

nuhkka · 16th November 2009, 04:49

why does my mpc-hc freeze when the windows uac thing comes up?

tetsuo55 · 16th November 2009, 08:56

Quote:

Originally Posted by Opuz Klass

Hi there guys!

MPC-HC is crashing with Intel GMA500 graphics chipset when trying to play any video using EVR-CP in Windows 7. I would like to help you by providing you with minidumps but I'm not finding them. I've confirmed this behavior in several laptops using this chipset with Windows 7 (latest drivers).

have a look here: http://sourceforge.net/apps/trac/mpc...ing_guidelines

Quote:

Originally Posted by nuhkka

why does my mpc-hc freeze when the windows uac thing comes up?

see here http://forum.doom9.org/showthread.ph...75#post1344275

STaRGaZeR · 16th November 2009, 14:11

Quote:

Originally Posted by betaking

Hi,why Complete Last mpc-hc give me error:
MEDIASUBTYPE_DVB_SUBTITLES not defined.

Same question:

Error 2 error C2065: 'MEDIASUBTYPE_DVB_SUBTITLES' : undeclared identifier SubtitleInputPin.cpp 68

14th November 2009, 18:48	#10464 \| Link
therealjoeblow Registered User Join Date: Jan 2004 Location: Canada Posts: 210	Feature Request: Smart-Stretch Shader Would it be possible to add a shader that "smart-stretches" 4:3 media content to 16:9 similar to the way that PowerDVD does for DVD material, ie, where the center 1/3 of the image remains mostly undistorted, and the bulk of the stretching is done in the outer thirds, more towards the edges of the video frame? Kind of like projecting the image onto a cylinder... __________________ Cheers, The REAL Joe Last edited by therealjoeblow; 14th November 2009 at 20:26.

16th November 2009, 00:29	#10474 \| Link
tetsuo55 MPC-HC Project Manager Join Date: Mar 2007 Posts: 2,317	i have run mpc-hc through the microsoft application verifier and it fails quite a few tests. This is a call to all coders, please help us fix the crashes and memory leaks. the verifier can be downloaded here: http://www.microsoft.com/downloads/d...DisplayLang=en The tests that give errors and cause crashes are: Handles, Heaps, locks, low resource, LuaPriv and DangerousAPi the goal should be to have an error free (and warning free) result with all tests enabled. --------------- EDIT: Also /SAFESEH fails to complete, some precompiled parts need to be recompiled with vs2008 with the /SAFESEH switch before MPC-HC itself can be compiled with it --------------- EDIT2: /DYNAMICBASE, /NXCOMPAT should be added by default (and /SAFESEH once that has been fixed) Also /RTC1, /Od can be used to find out more about the memory leaks/crashes and if you happen to have a enterprise version of vs2008 /analyse will give even more info ----------- EDIT3: Some data: On my systems: about 80% of allocated ram is unused/leaked by mpc-hc mpc-hc leaks 4kb/s during playback during playback 200MB+ of pagefile is allocated and heavily used (many pagefaults) Cleaned with no movie mpc-hc only uses 700kb of ram, uncleaned it uses 13MB and with a movie the lowest i've seen is 40MB(18MB cleaned) __________________ MPC-HC, an open source project everyone can improve. Want to help? Test Nightly Builds, submit patches or bugs and chat on IRC Last edited by tetsuo55; 16th November 2009 at 00:37.

14th November 2009, 17:07	#10463 \| Link
Opuz Klass Registered User Join Date: Nov 2006 Posts: 15	Hi there guys! MPC-HC is crashing with Intel GMA500 graphics chipset when trying to play any video using EVR-CP in Windows 7. I would like to help you by providing you with minidumps but I'm not finding them. I've confirmed this behavior in several laptops using this chipset with Windows 7 (latest drivers).

14th November 2009, 19:42	#10465 \| Link
Snowknight26 Registered User Join Date: Aug 2007 Posts: 1,430	http://mpc-hc.svn.sourceforge.net/vi...7&pathrev=1338 Wouldn't it be more appropriate if the stream names were "MPEG-2" instead of "MPEG 2", "H.264" instead of "H264", "Secondary DTS-HD High Resolution Audio" instead of "Secondary DTS HD High Resolution Audio", and "VC-1" instead of "VC1?"

14th November 2009, 20:51	#10467 \| Link
Mangix Audiophile Join Date: Oct 2006 Posts: 353	boiled_sugar's sample works on my computer. using XP 32-bit, VMR9, DXVA, 195.39 GeForce drivers

15th November 2009, 03:59	#10469 \| Link
Egh Registered User Join Date: Jun 2005 Posts: 630	tetsuo55: do you think it would be a worthy feature is there was a method to override a sub style with default? I know the styles can be edited on-the-fly, but if you want to revert a style to one's default choice, you have to adjust font, scaling, several colours, outline/shadow size etc. An "override" button in that tabsheet would be handy, imo. I'm so annoyed by some "creativity" styles that I quite so often just override them manually.

15th November 2009, 09:58	#10471 \| Link
easyfab Registered User Join Date: Jan 2002 Posts: 332	@boiled_sugar : I've the same problem on my Ati HD 2600 with mpc dxva and pdvd dxva : so it's an Ati bug, I hope it's only a driver problem and not hardware.

15th November 2009, 11:22	#10472 \| Link
littleD Registered User Join Date: Aug 2008 Posts: 343	I have ati and have corruption too. BTw whats that anime?

15th November 2009, 14:22	#10473 \| Link
donaldtone Registered User Join Date: Sep 2004 Posts: 32	wishilist: 1. update ogglib in ogg Directshow splitter to support more formats: like Kate stream. 2. add Kate format subtitle support to subtitle render engine. Then mpc-hc can completely support new version of ogv format. This format is totally free and theora, vorbis and kate are patent free codecs. Right now only VLC can support its subtitle.

16th November 2009, 03:41	#10476 \| Link
Opuz Klass Registered User Join Date: Nov 2006 Posts: 15	tetsuo55, Have you read my report in post 10489 of this thread? Please let me know how I can help you solving this problem. Thanks

16th November 2009, 03:45	#10477 \| Link
betaking Fantasy Codecs writer Join Date: Nov 2007 Location: Yang Zhou,Jiang Su,China Posts: 392	Hi,why Complete Last mpc-hc give me error: MEDIASUBTYPE_DVB_SUBTITLES not defined.

16th November 2009, 04:49	#10478 \| Link
nuhkka Registered User Join Date: Oct 2007 Posts: 25	why does my mpc-hc freeze when the windows uac thing comes up?