RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 717

Ronski · 23rd March 2016, 19:58

Yes it is odd, just trying it the other way round with the X99 as the client and running more than one on it doesn't seem to make much difference. I'll have to test again with the older PC as the client and see what happens. Could it of just been that the FPS happened to ramp up when I tried it as the content of the video changed, thus purely coincidence?

defalopii · 26th March 2016, 01:47

Hello, RipBot developer, how much You can add distributed server at maximum?
Log time ago ive seen ure using 4 DE, then 8DE, and now 10DE. Is that possible to make it unlimited DE server?
I imagine that i can add more and more DE server, this will speedup encoding, especially for the next codec HEVC

burt123 · 26th March 2016, 10:17

Quote:

Originally Posted by defalopii

Hello, RipBot developer, how much You can add distributed server at maximum?
Log time ago ive seen ure using 4 DE, then 8DE, and now 10DE. Is that possible to make it unlimited DE server?
I imagine that i can add more and more DE server, this will speedup encoding, especially for the next codec HEVC

Hear, hear....................

gabbett1 · 29th March 2016, 16:39

I just recently used Ripbot to convert Insurgent and I'm having an issue. The file I created was a .mp4. When I try and play the movie it takes about 30 seconds for it to begin play, and when it does I only get sound, no video. If I simply rename the file to a .mkv it will play just fine. Rename back to .mp4 and same issue. Takes a while to play and no video. What could be the problem? I could use some help please.

Atak_Snajpera · 29th March 2016, 17:49

Are you using MPC-HC player?

omegaeel · 30th March 2016, 05:45

I have been getting Socket Errors on a 2nd PC I use in DE in Ripbot. The log in EncodingServer first says "Socket Error 10060" and after clicking ON within EncodingClient the server logs return "Socket Error 10038". As well as an "Access violation" error.

I tried deleting and re-established the Firewall rules and disabling Windows Firewall all together to no effect.

Using v1.19.3 on both PCs.

https://www.dropbox.com/s/2fmi3do605...43.18.png?dl=0

dv8r · 30th March 2016, 09:50

gabbett, insurgent has a lot of scrambled titles. There are a couple of long threads about it on makemkv forum. Maybe this is the issue?

gabbett1 · 30th March 2016, 12:52

Quote:

Originally Posted by Atak_Snajpera

Are you using MPC-HC player?

I'm using Windows Media Player.

gabbett1 · 30th March 2016, 12:53

Quote:

Originally Posted by dv8r

gabbett, insurgent has a lot of scrambled titles. There are a couple of long threads about it on makemkv forum. Maybe this is the issue?

I don't think so. I'm using the title that AnyDVD said was good. And like I said, it plays just find when I rename it to a .mkv

Atak_Snajpera · 30th March 2016, 13:14

Quote:

Originally Posted by gabbett1

I'm using Windows Media Player.

Bad idea. Use something more advanced like MPC-HC.

Atak_Snajpera · 30th March 2016, 13:34

Quote:

Originally Posted by omegaeel

I have been getting Socket Errors on a 2nd PC I use in DE in Ripbot. The log in EncodingServer first says "Socket Error 10060" and after clicking ON within EncodingClient the server logs return "Socket Error 10038". As well as an "Access violation" error.

I tried deleting and re-established the Firewall rules and disabling Windows Firewall all together to no effect.

Using v1.19.3 on both PCs.

https://www.dropbox.com/s/2fmi3do605...43.18.png?dl=0

Most likely some software on your main pc (where you have EncodingClient running) is blocking connection from EncodingServer. Connection must be established in both ways

fatpizza · 31st March 2016, 06:53

Are there any known issues with using OpenCL on integrated intel GPU's? I have a Core i7 6700 and with Intel 530 and whenever I enable OpenCL in the Ripbot options it comes up with this:

C:\>"C:\Program Files\Ripbot\RipBot264v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job105\job105.avs" -o - | "C:\Program Files\Ripbot\RipBot264v1.19.2\tools\x264\x264_x64.exe" --opencl --opencl-device 0 --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 197017 --sar 1:1 --level 4.1 --preset slow --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x804p 1:1 @ 10000000/417083 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 530
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

I tried installing the 2015 vc_redist mentioned a couple of pages ago but with no luck.

Wildfire · 31st March 2016, 09:56

Quote:

Originally Posted by fatpizza

Are there any known issues with using OpenCL on integrated intel GPU's? I have a Core i7 6700 and with Intel 530 and whenever I enable OpenCL in the Ripbot options it comes up with this:

C:\>"C:\Program Files\Ripbot\RipBot264v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job105\job105.avs" -o - | "C:\Program Files\Ripbot\RipBot264v1.19.2\tools\x264\x264_x64.exe" --opencl --opencl-device 0 --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 197017 --sar 1:1 --level 4.1 --preset slow --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x804p 1:1 @ 10000000/417083 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 530
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

I tried installing the 2015 vc_redist mentioned a couple of pages ago but with no luck.

The obvious question here is, of course, are you using the most recent drivers for the Intel 530 GPU?

Taurus · 31st March 2016, 10:31

@fatpizza:
did you verify your opencl installation with a tool like "GPU Caps Viewer" or similar?
I had a bad time some month ago finding the right drivers at Intel.
The "normal" drivers did not support opencl.
After some fiddling around and try and error, I finally got it working.
and happily living ever after...

fatpizza · 31st March 2016, 13:17

Quote:

Originally Posted by Wildfire

The obvious question here is, of course, are you using the most recent drivers for the Intel 530 GPU?

Sorry, that should have been the first thing that I mentioned. :P Yes I did download the latest drivers.

Quote:

Originally Posted by Taurus

@fatpizza:
did you verify your opencl installation with a tool like "GPU Caps Viewer" or similar?
I had a bad time some month ago finding the right drivers at Intel.
The "normal" drivers did not support opencl.
After some fiddling around and try and error, I finally got it working.
and happily living ever after...

I just used the OpenCLInfo.exe and that seemed to think everything was ok. The drivers I installed was just the normal download however in the release notes it says it includes the OpenCL package. I'll try out the Caps Viewer thing now though.

fatpizza · 31st March 2016, 13:29

OK, I've tried the GPU Caps Viewer and I can run all the OpenCL tests on both CPU and GPU without issue.

omegaeel · 31st March 2016, 16:40

Quote:

Originally Posted by Atak_Snajpera

Most likely some software on your main pc (where you have EncodingClient running) is blocking connection from EncodingServer. Connection must be established in both ways

Thanks for the advice. I had forgotten I installed VirtualBox a while back. It installed its own virtual adapter, once disabled, everything worked fine.

rekd0514 · 2nd April 2016, 15:42

I'm having an issue where when I encode with a locked sized at 23830 to fit on a BD-R disc it no longer will fit correctly. The encoded file size is almost always a little too large to fit on the disc when the job is complete. Ripbot has only been doing this when I upgraded to the newest 1.19.3 version. I believe I was on 1.18.3 before.

Any ideas? Thank you for the help in advance!

Atak_Snajpera · 2nd April 2016, 16:08

Just reduce target size to 23800 if you get too big file. Maybe newer x264 builds changed something in 2-pass mode.

rekd0514 · 2nd April 2016, 16:55

Quote:

Originally Posted by Atak_Snajpera

Just reduce target size to 23800 if you get too big file. Maybe newer x264 builds changed something in 2-pass mode.

Ahhh I didn't realize you could just type in the size that you wanted! I thought the locked sizes were the only options. Very cool, thank you!

29th March 2016, 17:49	#14325 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	Are you using MPC-HC player? __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

30th March 2016, 05:45	#14326 \| Link
omegaeel Registered User Join Date: Jun 2012 Posts: 8	Socket Error I have been getting Socket Errors on a 2nd PC I use in DE in Ripbot. The log in EncodingServer first says "Socket Error 10060" and after clicking ON within EncodingClient the server logs return "Socket Error 10038". As well as an "Access violation" error. I tried deleting and re-established the Firewall rules and disabling Windows Firewall all together to no effect. Using v1.19.3 on both PCs. https://www.dropbox.com/s/2fmi3do605...43.18.png?dl=0

2nd April 2016, 15:42	#14338 \| Link
rekd0514 Registered User Join Date: Mar 2016 Posts: 2	I'm having an issue where when I encode with a locked sized at 23830 to fit on a BD-R disc it no longer will fit correctly. The encoded file size is almost always a little too large to fit on the disc when the job is complete. Ripbot has only been doing this when I upgraded to the newest 1.19.3 version. I believe I was on 1.18.3 before. Any ideas? Thank you for the help in advance! Last edited by rekd0514; 2nd April 2016 at 15:55.

2nd April 2016, 16:08	#14339 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	Just reduce target size to 23800 if you get too big file. Maybe newer x264 builds changed something in 2-pass mode. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23rd March 2016, 19:58	#14321 \| Link
Ronski Registered User Join Date: Oct 2010 Posts: 61	Yes it is odd, just trying it the other way round with the X99 as the client and running more than one on it doesn't seem to make much difference. I'll have to test again with the older PC as the client and see what happens. Could it of just been that the FPS happened to ramp up when I tried it as the content of the video changed, thus purely coincidence?

26th March 2016, 01:47	#14322 \| Link
defalopii Registered User Join Date: Feb 2011 Posts: 70	Hello, RipBot developer, how much You can add distributed server at maximum? Log time ago ive seen ure using 4 DE, then 8DE, and now 10DE. Is that possible to make it unlimited DE server? I imagine that i can add more and more DE server, this will speedup encoding, especially for the next codec HEVC

29th March 2016, 16:39	#14324 \| Link
gabbett1 Registered User Join Date: Sep 2015 Posts: 67	I just recently used Ripbot to convert Insurgent and I'm having an issue. The file I created was a .mp4. When I try and play the movie it takes about 30 seconds for it to begin play, and when it does I only get sound, no video. If I simply rename the file to a .mkv it will play just fine. Rename back to .mp4 and same issue. Takes a while to play and no video. What could be the problem? I could use some help please.

30th March 2016, 09:50	#14327 \| Link
dv8r cdial Join Date: Jan 2016 Posts: 27	gabbett, insurgent has a lot of scrambled titles. There are a couple of long threads about it on makemkv forum. Maybe this is the issue?

31st March 2016, 06:53	#14332 \| Link
fatpizza Registered User Join Date: Nov 2015 Posts: 16	Are there any known issues with using OpenCL on integrated intel GPU's? I have a Core i7 6700 and with Intel 530 and whenever I enable OpenCL in the Ripbot options it comes up with this: C:\>"C:\Program Files\Ripbot\RipBot264v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job105\job105.avs" -o - \| "C:\Program Files\Ripbot\RipBot264v1.19.2\tools\x264\x264_x64.exe" --opencl --opencl-device 0 --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 197017 --sar 1:1 --level 4.1 --preset slow --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" - y4m [info]: 1920x804p 1:1 @ 10000000/417083 fps (cfr) x264 [info]: using SAR=1/1 x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2 x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 530 x264 [info]: profile High, level 4.1 x264 [error]: OpenCL: Invalid value. x264 [error]: OpenCL: fatal error, aborting encode x264 [error]: OpenCL: Invalid value. x264 [error]: OpenCL: fatal error, aborting encode x264 [error]: OpenCL: Invalid value. x264 [error]: OpenCL: fatal error, aborting encode x264 [error]: x264_encoder_encode failed I tried installing the 2015 vc_redist mentioned a couple of pages ago but with no luck.

31st March 2016, 10:31	#14334 \| Link
Taurus Registered User Join Date: Mar 2002 Location: Krautland Posts: 903	@fatpizza: did you verify your opencl installation with a tool like "GPU Caps Viewer" or similar? I had a bad time some month ago finding the right drivers at Intel. The "normal" drivers did not support opencl. After some fiddling around and try and error, I finally got it working. and happily living ever after...

31st March 2016, 13:29	#14336 \| Link
fatpizza Registered User Join Date: Nov 2015 Posts: 16	OK, I've tried the GPU Caps Viewer and I can run all the OpenCL tests on both CPU and GPU without issue.