Cross-Platform D2V Source for VapourSynth - Page 9

Daemon404 · 19th February 2017, 20:28

Binaries for 1.1 are in the OP.

Somehow I'm not dead.

KingLir · 19th February 2017, 23:29

Quote:

Originally Posted by Daemon404

Binaries for 1.1 are in the OP.

Thanks! Can't build on macOS, getting this after autogen and configure:

$ make
CXX src/core/compat.lo
CXX src/core/d2v.lo
CXX src/core/decode.lo
src/core/decode.cpp:450:45: warning: 'codec' is deprecated
[-Wdeprecated-declarations]
if (dctx->fctx->streams[i]->codec->codec_type == AVMEDIA...
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavformat/avformat.h:893:21: note:
'codec' has been explicitly marked deprecated here
AVCodecContext *codec;
^
src/core/decode.cpp:491:13: warning: 'avcodec_decode_video2' is deprecated
[-Wdeprecated-declarations]
avcodec_decode_video2(dctx->avctx, out, &av_ret, &dctx->inpkt);
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:4812:5: note:
'avcodec_decode_video2' has been explicitly marked deprecated here
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1578:16: warning:
'convergence_duration' is deprecated [-Wdeprecated-declarations]
typedef struct AVPacket {
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1630:13: note:
'convergence_duration' has been explicitly marked deprecated here
int64_t convergence_duration;
^
src/core/decode.cpp:510:25: warning: 'avcodec_decode_video2' is deprecated
[-Wdeprecated-declarations]
int r = avcodec_decode_video2(dctx->avctx, out, &av_ret...
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:4812:5: note:
'avcodec_decode_video2' has been explicitly marked deprecated here
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1578:16: warning:
'convergence_duration' is deprecated [-Wdeprecated-declarations]
typedef struct AVPacket {
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1630:13: note:
'convergence_duration' has been explicitly marked deprecated here
int64_t convergence_duration;
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1578:16: warning:
'convergence_duration' is deprecated [-Wdeprecated-declarations]
typedef struct AVPacket {
^
/usr/local/Cellar/ffmpeg/3.2.4/include/libavcodec/avcodec.h:1630:13: note:
'convergence_duration' has been explicitly marked deprecated here
int64_t convergence_duration;
^
6 warnings generated.
CXX src/vs/applyrff.lo
src/vs/applyrff.cpp:192:36: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:193:36: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:196:40: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:197:40: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:200:44: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:201:44: error: expected expression
data->fields.push_back({ i, Progressive });
^
src/vs/applyrff.cpp:207:36: error: expected expression
data->fields.push_back({ i, tff ? Top : Bottom });
^
src/vs/applyrff.cpp:208:36: error: expected expression
data->fields.push_back({ i, tff ? Bottom : Top });
^
src/vs/applyrff.cpp:211:40: error: expected expression
data->fields.push_back({ i, tff ? Top : Bottom });
^
9 errors generated.

Cary Knoop · 20th February 2017, 03:30

New version works great!

I have to remind myself to take care when filenames contain spaces.

jackoneill · 20th February 2017, 12:56

Quote:

Originally Posted by KingLir

Thanks! Can't build on macOS, getting this after autogen and configure:
src/vs/applyrff.cpp:211:40: error: expected expression
data->fields.push_back({ i, tff ? Top : Bottom });
^
9 errors generated.

Oops. Try this:

Code:

make clean && ./configure CXXFLAGS='-std=c++11' && make

KingLir · 20th February 2017, 13:07

Quote:

Originally Posted by jackoneill

Oops. Try this:

Code:

make clean && ./configure CXXFLAGS='-std=c++11' && make

Thanks! Works.

sl1pkn07 · 20th May 2018, 22:17

this is ok with the latest ffmpeg 4?

Code:

diff --git a/src/core/d2v.hpp b/src/core/d2v.hpp
index f87b1a0..ecdae78 100644
--- a/src/core/d2v.hpp
+++ b/src/core/d2v.hpp
@@ -68,7 +68,7 @@ static const int idct_algo_conv[8] = {
     FF_IDCT_AUTO,
     FF_IDCT_AUTO,
     FF_IDCT_AUTO,
-    FF_IDCT_XVIDMMX,
+    FF_IDCT_XVID,
     FF_IDCT_SIMPLEMMX
 };
 
diff --git a/src/core/decode.cpp b/src/core/decode.cpp
index b563697..11a0fef 100644
--- a/src/core/decode.cpp
+++ b/src/core/decode.cpp
@@ -242,12 +242,6 @@ decodecontext *decodeinit(d2vcontext *dctx, int threads, string& err)
     /* Set the thread count. */
     ret->avctx->thread_count = threads;
 
-    /*
-     * Enable EMU_EDGE so that we can use buffers that are
-     * not padded by 32 pixels.
-     */
-    ret->avctx->flags |= CODEC_FLAG_EMU_EDGE;
-
     /* Use refcounted frames. */
     ret->avctx->refcounted_frames = 1;

sl1pkn07 · 2nd June 2018, 21:31

done in upstream

lansing · 24th July 2018, 23:35

Can this plugin works with D2VWitch to index video like this so I can skip a step?

Code:

core.d2v.Source(r"my_video.ts")

Also I have problem opening d2v made by dgindex when the video path in the d2v is non English because the dgindex d2v is in ANSI encoding instead of utf-8.

jackoneill · 25th July 2018, 12:24

Quote:

Originally Posted by lansing

Can this plugin works with D2VWitch to index video like this so I can skip a step?

Code:

core.d2v.Source(r"my_video.ts")

That would be nice. It's on my to do list.

Quote:

Originally Posted by lansing

Also I have problem opening d2v made by dgindex when the video path in the d2v is non English because the dgindex d2v is in ANSI encoding instead of utf-8.

That's unlikely to be fixed in any way. Does DGIndex have a feature you need that D2V Witch doesn't have?

lansing · 25th July 2018, 15:02

Quote:

Originally Posted by jackoneill

That's unlikely to be fixed in any way. Does DGIndex have a feature you need that D2V Witch doesn't have?

Yeah I know this is a dgindex problem that have been existed since the beginning. I just wanna see if it would be easy enough to fix it on this end.

ChaosKing · 25th July 2018, 16:44

You don't have to use the full path in d2v. Just uncheck "Use full paths" in options in dgindex and only the file name will be stored.

lansing · 25th July 2018, 21:34

Quote:

Originally Posted by ChaosKing

You don't have to use the full path in d2v. Just uncheck "Use full paths" in options in dgindex and only the file name will be stored.

The problem is still there if my file name is non English.

lansing · 26th July 2019, 09:57

I'm trying to stress my new Ryzen 3900x with this filter, but I was never able to get cpu utilization over 25%. And setting threads count to 10 is 200fps faster than leaving it at auto, is there something wrong?

Selur · 17th July 2021, 15:28

Trying to build d2vwitch using:

Code:

### d2vwitch
if echo "$args" | grep -q -i -w -E 'all|d2vwitch'
then
  mkdir build
  cd build

  top="$PWD"
  export PATH="$top:$PATH"
  export PKG_CONFIG_PATH="$top/libs/lib/pkgconfig"

  git clone --depth 1 https://github.com/dubhater/D2VWitch
  git clone --depth 1 https://github.com/FFmpeg/FFmpeg
  git clone --depth 1 https://github.com/vapoursynth/vapoursynth

  build_nasm

  cd FFmpeg
  ./configure --prefix="$top/libs" \
    --enable-gpl \
    --enable-version3 \
    --disable-encoders \
    --disable-muxers \
    --disable-outdevs \
    --disable-programs \
    --disable-doc \
    --disable-debug \
    --disable-xlib \
    --disable-sdl2 \
    --extra-cflags="-ffunction-sections -fdata-sections"
  make $MAKEFLAGS
  make install

  cd ../D2VWitch
  autoreconf -if
  vapoursynth_CFLAGS="-I../vapoursynth/include" \
  vapoursynth_LIBS=" " \
  LDFLAGS="-Wl,--gc-sections" \

  ./configure
  make $MAKEFLAGS
  strip d2vwitch
  cp -f d2vwitch ../..
  cd ..

  cat <<EOL >../d2vwitch-sources.txt
https://github.com/dubhater/D2VWitch
$(git -C D2VWitch rev-parse HEAD)

https://github.com/vapoursynth/vapoursynth
$(git -C vapoursynth rev-parse HEAD)

https://github.com/FFmpeg/FFmpeg
$(git -C FFmpeg rev-parse HEAD)
EOL

  cd ..
  rm -rf build
fi

see: https://github.com/Selur/HybridDeploy

problem is, the build stops at:

Code:

checking for vapoursynth... no
configure: error: Package requirements (vapoursynth) were not met:

No package 'vapoursynth' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables vapoursynth_CFLAGS
and vapoursynth_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

Any idea what am I missing? This did work before,..

Cu Selur

jackoneill · 18th July 2021, 20:00

I think you need to put something that is not whitespace in vapoursynth_LIBS. „-L.” should be harmless.

Selur · 19th July 2021, 04:48

Thanks for the suggestion, but using "-L." sadly didn't change much:

Code:

+ cd ../D2VWitch
+ autoreconf -if
configure.ac:17: installing './compile'
configure.ac:10: installing './config.guess'
configure.ac:10: installing './config.sub'
configure.ac:6: installing './install-sh'
configure.ac:6: installing './missing'
Makefile.am: installing './depcomp'
+ vapoursynth_CFLAGS=-I../vapoursynth/include
+ vapoursynth_LIBS=-L.
+ LDFLAGS=-Wl,--gc-sections
+ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for grep that handles long lines and -e... /bin/grep
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGEFILE_SOURCE value needed for large files... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for vapoursynth... no
configure: error: Package requirements (vapoursynth) were not met:

No package 'vapoursynth' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables vapoursynth_CFLAGS
and vapoursynth_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

full log: https://rentry.co/wwf6b
it stops with the same error.

Cu Selur

jackoneill · 21st July 2021, 20:38

Code:

  cd ../D2VWitch
  autoreconf -if
  vapoursynth_CFLAGS="-I../vapoursynth/include" \
  vapoursynth_LIBS=" " \
  LDFLAGS="-Wl,--gc-sections" \

  ./configure

Perhaps you need a backslash on the empty line as well. Or just put the assignments and the call to configure on the same line. (And use vapoursynth_LIBS="-L.")

Selur · 22nd July 2021, 15:33

Code:

cd ../D2VWitch
   autoreconf -if
   vapoursynth_CFLAGS="-I../vapoursynth/include" vapoursynth_LIBS="-L." LDFLAGS="-Wl,--gc-sections" ./configure
   make $MAKEFLAGS

get's me further but still fails, see: https://paste.ee/p/7KJ4O

jackoneill · 23rd July 2021, 16:04

I guess it's time to update that code to match the changes in ffmpeg.

Jukus · 12th October 2021, 10:35

https://github.com/dwbuiten/d2vsource/issues/48

20th February 2017, 03:30	#163 \| Link
Cary Knoop Cary Knoop Join Date: Feb 2017 Location: Newark CA, USA Posts: 397	New version works great! I have to remind myself to take care when filenames contain spaces. Last edited by Cary Knoop; 20th February 2017 at 04:42.

2nd June 2018, 21:31	#167 \| Link
sl1pkn07 Pajas Mentales... Join Date: Dec 2004 Location: Spanishtán Posts: 496	done in upstream __________________ [AUR] Vapoursynth Stuff [AUR] Avisynth Stuff

24th July 2018, 23:35	#168 \| Link
lansing Registered User Join Date: Sep 2006 Posts: 1,645	Can this plugin works with D2VWitch to index video like this so I can skip a step? Code: core.d2v.Source(r"my_video.ts") Also I have problem opening d2v made by dgindex when the video path in the d2v is non English because the dgindex d2v is in ANSI encoding instead of utf-8.

25th July 2018, 16:44	#171 \| Link
ChaosKing Registered User Join Date: Dec 2005 Location: Germany Posts: 1,751	You don't have to use the full path in d2v. Just uncheck "Use full paths" in options in dgindex and only the file name will be stored. __________________ AVSRepoGUI // VSRepoGUI - Package Manager for AviSynth // VapourSynth VapourSynth Portable FATPACK \|\| VapourSynth Database \|\| https://github.com/avisynth-repository

18th July 2021, 20:00	#175 \| Link
jackoneill unsigned int Join Date: Oct 2012 Location: 🇪🇺 Posts: 760	I think you need to put something that is not whitespace in vapoursynth_LIBS. „-L.” should be harmless. __________________ Buy me a "coffee" and/or hire me to write code!

19th February 2017, 20:28	#161 \| Link
Daemon404 Registered User Join Date: Mar 2005 Posts: 128	Binaries for 1.1 are in the OP. Somehow I'm not dead.

26th July 2019, 09:57	#173 \| Link
lansing Registered User Join Date: Sep 2006 Posts: 1,645	I'm trying to stress my new Ryzen 3900x with this filter, but I was never able to get cpu utilization over 25%. And setting threads count to 10 is 200fps faster than leaving it at auto, is there something wrong?

21st July 2021, 20:38	#177 \| Link
jackoneill unsigned int Join Date: Oct 2012 Location: 🇪🇺 Posts: 760	Code: cd ../D2VWitch autoreconf -if vapoursynth_CFLAGS="-I../vapoursynth/include" \ vapoursynth_LIBS=" " \ LDFLAGS="-Wl,--gc-sections" \ ./configure Perhaps you need a backslash on the empty line as well. Or just put the assignments and the call to configure on the same line. (And use vapoursynth_LIBS="-L.") __________________ Buy me a "coffee" and/or hire me to write code!

22nd July 2021, 15:33	#178 \| Link
Selur Registered User Join Date: Oct 2001 Location: Germany Posts: 7,034	Code: cd ../D2VWitch autoreconf -if vapoursynth_CFLAGS="-I../vapoursynth/include" vapoursynth_LIBS="-L." LDFLAGS="-Wl,--gc-sections" ./configure make $MAKEFLAGS get's me further but still fails, see: https://paste.ee/p/7KJ4O __________________ Hybrid here in the forum, homepage

23rd July 2021, 16:04	#179 \| Link
jackoneill unsigned int Join Date: Oct 2012 Location: 🇪🇺 Posts: 760	I guess it's time to update that code to match the changes in ffmpeg. __________________ Buy me a "coffee" and/or hire me to write code!

12th October 2021, 10:35	#180 \| Link
Jukus Registered User Join Date: Jul 2019 Location: Russia Posts: 85	https://github.com/dwbuiten/d2vsource/issues/48

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode