DGIndex Batcher v1.18 (17 Apr 2018) - Page 4

real.finder · 20th January 2021, 03:16

Quote:

Originally Posted by kedautinh12

I only give Maki stuff cause i think he changed many thing after Chikuzen stop updated MPEG2DecPlus and Asd-g continue updated with some change. I encourage you need complex with 2 ver MPEG2DecPlus by Asd-g and DGMPGDecMod by Maki to be new DGMPGDec with many changed.

Changed from maki:
DgDecode: https://onedrive.live.com/?cid=8658E...211215&o=OneUp

DgIndex: https://onedrive.live.com/?cid=8658E...211215&o=OneUp

Dgvfpai https://onedrive.live.com/?cid=8658E...211215&o=OneUp

in fact Maki was the 1st one then Chikuzen frok from Maki and did many changes and cleanup in MPEGDec part and call it MPEG2DecPlus, then Chikuzen stopped, and finally Asd-g did frok from Chikuzen and change the name to D2VSource after remove DeBlock and any thing else a side from MPEGDec

videoh · 20th January 2021, 03:18

Quote:

Originally Posted by kedautinh12

After i test again with DGMPGDec and MPEG2DecPlus. I compare speed index and it's same. I don't know why speed different yesterday. Sr, it's my mistake. Please forgive me

MPEG2DecPlus does not have an indexer! You could not have compared DGIndex 2.0.0.3 to a nonexistent thing. Sheesh, how many times do I have to say it.

Still, I accept your apology. Thank you.

And I will say it again: DGIndex 2.0.0.3 blows away the other forked indexers.

kedautinh12 · 20th January 2021, 03:32

Quote:

Originally Posted by real.finder

in fact Maki was the 1st one then Chikuzen frok from Maki and did many changes and cleanup in MPEGDec part and call it MPEG2DecPlus, then Chikuzen stopped, and finally Asd-g did frok from Chikuzen and change the name to D2VSource after remove DeBlock and any thing else a side from MPEGDec

Oh, i seen Chikuzen stop update from 2016/09/01 and Maki still update continue untill 2017, you can seen it in changelog file

kedautinh12 · 20th January 2021, 03:33

Quote:

Originally Posted by videoh

MPEG2DecPlus does not have an indexer! You could not have compared DGIndex 2.0.0.3 to a nonexistent thing. Sheesh, how many times do I have to say it.

Still, I accept your apology. Thank you.

And I will say it again: DGIndex 2.0.0.3 blows away the other forked indexers.

Yeah, i seen, thank for your hard work

StainlessS · 23rd January 2021, 02:27

Quote:

Originally Posted by StainlessS

Danette,
Bit busy at the moment, I'll try get around to it either tomorrow or Wednesday,
probably something reasonably simple to deal with [need mod and re-compile].

Sorry Danette, still not gotten around to it yet, been trying to coax myself into feeling the AutoIt vibe, but I just ain't feelin' it.
I'll try do it tomorrow, no really I will.
Time for Bed.

Danette · 23rd January 2021, 18:55

Thanks.

StainlessS · 24th January 2021, 01:15

It on its way, but still got some things to do, sorry for the delay.

StainlessS · 24th January 2021, 06:29

Danette,
See SendSpace below this post.
I've updated both DGIndex_Batcher and MeGUI_AutoEncode_Batcher,
have not used either for some time, MeGUI changed "Settings" dialog to "Options", which broke MeGUI batcher, fixed [should work on pre build 2896 also].
Made a few additions to the DGIndex AVS template.

As So [just demo really].

Code:

# Standard DGIndex Infos

VideoFileName   = "__vid__"
AudioFileName   = "__aud__"
AudioDelay      = Value("__del__")

# DGIndex_Batcher Infos

# Stuff from DGIndex Information Window will be inserted into below '__stuff__' insertion markers.

DGI_Field_Order = "__Field_Order__"
DGI_Stream_Type = "__Stream_Type__"
DGI_Profile     = "__Profile__"
DGI_Frame_Size  = "__Frame_Size__"
DGI_Display_Size= "__Display_Size__"
DGI_Aspect_Ratio= "__Aspect_Ratio__"
DGI_Frame_Rate  = "__Frame_Rate__"
DGI_Video_Type  = "__Video_Type__"
DGI_Sequence    = "__Sequence__"
DGI_Frame_Struct= "__Frame_Struct__"
DGI_Frame_Type  = "__Frame_Type__"
DGI_Colorimetry = "__Colorimetry__"

Mpeg2Source(VideoFileName)

AudioExt = GetFileExtension(AudioFileName)

Aud=      (AudioExt==".ac3") ? NICAC3Source(AudioFileName,channels=2,DRC=0)
        \ : (AudioExt==".mpa"||AudioExt=="mp1"||AudioExt==".mp2"||AudioExt==".mp3") ? NicMPG123Source(AudioFileName,Normalize=False)
        \ : (AudioExt==".wav") ? RaWavSource(AudioFileName)
        \ : (AudioExt==".dts") ? NicDTSSource(AudioFileName)
        \ : 0

#Assert(!isInt(Aud),"NO AUDIO")

(!isInt(Aud)) ? AudioDubEx(Aud).DelayAudio(AudioDelay).Trim(0,0) : NOP    # Trim, chop/add audio to length

(!isInt(Aud) && AudioRate() <> 44100) ? ResampleAudio(44100) : NOP


S= \
  "Field Order   = " + DGI_Field_Order + "\n" + \
  "Stream Type   = " + DGI_Stream_Type + "\n" + \
  "Profile       = " + DGI_Profile + "\n" + \
  "Frame Size    = " + DGI_Frame_Size + "\n" + \
  "Display Size  = " + DGI_Display_Size + "\n" + \
  "Aspect Ratio  = " + DGI_Aspect_Ratio + "\n" + \
  "Frame Rate    = " + DGI_Frame_Rate + "\n" + \
  "Video Type    = " + DGI_Video_Type + "\n" + \
  "Sequence      = " + DGI_Sequence + "\n" + \
  "Frame Struct  = " + DGI_Frame_Struct + "\n" + \
  "Colorimetry   = " + DGI_Colorimetry

SubTitle(S,lsp=0,font="Courier New")

FAR = (DGI_Aspect_Ratio=="16:9 [3]") ?  16/9.0 : (DGI_Aspect_Ratio=="4:3 [2]") ? 4/3.0 : 1
Eval( (FAR!=1) ? "MeGUI_DarX=Round(FAR*1000) MeGUI_DarY=1000" : "" )

Return Last

##########

Function GetFileExtension(string fn) { rfn=fn.RevStr i=rfn.FindStr(".") Return (i==0) ? "" : rfn.LeftStr(i).RevStr }

Gonna get some shuteye, sorry for the long delay.
Let me know how it goes and if probls, I'll not update the first post until I hear if its working ok, is tedious and time consuming
to test everything, especially as I eg dont have Vista to re-check its probs, nor illegal field transition DVD's handy and the like.

EDIT: zip contains both batchers, + source.
Final test on full DVD, 5 VOB's, using the DGIndex template and passing though to MeGUI Batcher and did full encode also, although at Ultra Fast setting.

videoh · 24th January 2021, 11:40

Not seeing a SendSpace link.

gonca · 24th January 2021, 14:44

It is in the signature

StainlessS
Your finger must have slipped when you typed MeGUI, it came out MedGUI

videoh · 24th January 2021, 14:57

I don't see a signature. Where is it?

If for some reason signatures do not show for all users, it's better not to put your links there!

I have no idea why signatures are not displayed for me. Google it, I'm not the only one reporting no signatures showing.

videoh · 24th January 2021, 15:36

Never mind. I had signature display disabled in my profile. And I don't recall doing that!

Still, that's a good reason not to put your links exclusively in your signature.

StainlessS · 24th January 2021, 16:36

Thank you gonca and vh,
Post was only intended for danette.
EDIT: Seems to work OK on old DGIndex and new one.

videoh · 24th January 2021, 17:27

Quote:

Originally Posted by StainlessS

Seems to work OK on old DGIndex and new one.

Thanks for your tweak!

Danette · 24th January 2021, 22:58

When DGIndex 2.0.0.3 is set to normal playback speed, DGIndex Batcher 1.20 processes files about 5% faster than when DGIndex 1.5.8 was set to maximum playback speed and DGIndex Batcher 1.18 was used. I ran 37 files (each file is a 25 minute TV episode), several times, and found this to hold.

However, when DGIndex 2.0.0.3 is set to maximum speed, DGIndex Batcher 1.20 freezes after 1-2 episodes, most often during processing of the first episode. I tried many times and rebooted my Win 7 computer, as well.

StainlessS · 24th January 2021, 23:07

Did not even know it had a playback speed thingy.
Probably Batcher is waiting for something that has already happened, I'll take a look.
Thanks.

EDIT: So you are saying that it creates d2v file faster when on fast playback ?
or does it hang when its doing the preparatory preview scan to get info from the Information window.

EDIT: Do you have it doing the insert Infos whotsit, ie preview scan? [as in, insert into Template thingy]
EDIT: Also, you're doing ordinary Mpegs, not joining vobs from DVD ?
EDIT: It works OK without the fast Preview scan option set in DGIndex ?
EDIT: What exact setting do you have in the GUI ?
EDIT: Does the preview finish entirely, [ie real small clip, and fast machine] when it stalls ?
Is it stalling on eg VIDEO_TS.VOB or VTS_01_0.IFO, ie on VERY SHORT menu ?

Danette · 25th January 2021, 02:59

Yes, the playback speed is under “Options”. I’ve also run a number of different tests comparing the two versions.

As far as a comparison of DGIndex 2.0.0.3 to DGIndex 1.5.8 goes, I don’t see where there is a speed improvement in DGIndex viewing itself. When I run a preview, DGIndex 1.5.8 consistently runs 20% faster - repeat: the old version is faster. The “save project” function is 30% faster on DGIndex 1.5.8 vs. DGIndex 2.0.0.3. Is the speed improvement delivered at the d2v processing point in Avisynth as a result of an improved d2v file (which would be great)?

When I run DGIndex 2.0.0.3 / DGIndex Batcher 1.20 on the 37 files, I get a 5% faster time than when using DGIndex 1.5.8 / DGIndex Batcher 1.18. How this can be, in view of the above paragraph, I have no idea. The time, and the time difference, is the same no matter what speed setting I use in both versions. However, when I use the “maximum” speed setting in DGIndex 2.0.0.3, that causes the crash in DGIndex Batcher 1.20. When I use the “maximum” speed setting in DGIndex 1.5.8, there is no crash in DGIndex Batcher 1.18. When I use the “normal” or “slow” speed settings in DGIndex 2.0.0.3, there is no crash in DGIndex Batcher 1.20.

After thinking about this, since there seems to be little difference in the time it takes to process files with DGIndex Batcher 1.20 vs. DGIndex Batcher 1.18, I don’t see any reason to have either version of DGIndex’s playback speed set at “maximum.” In fact, I’m not clear on what benefit there is to moving up from DGIndex 1.5.8 to DGIndex 2.0.0.3 (unless there is a resultant d2v file processing uptick). If anyone can clarify, I’d be very interested.

Answering the other questions you asked:

- Join sets must start from 1, insert info and correct field order transition are checked (same as in DGIndex Batcher 1.18).
- When it hangs, it does so just as the second scan of a file begins. Sometimes it gets through several files ok, before it hangs on the next file.
- Did I answer the question on the exact GUI setting?
- I’m processing MPEG files only.

StainlessS · 25th January 2021, 04:49

Make sure that you have all settings identical in both versions of DGIndex.

I've been making some Mpeg files [re-encoded from MP4], I'll test some tomorrow.

Here, small mod to the template script, does not show Info subtitles if Batcher Insert Info is not turned on.

Make this change to subtitle Line

Code:

S= \
  "Field Order   = " + DGI_Field_Order + "\n" + \
  "Stream Type   = " + DGI_Stream_Type + "\n" + \
  "Profile       = " + DGI_Profile + "\n" + \
  "Frame Size    = " + DGI_Frame_Size + "\n" + \
  "Display Size  = " + DGI_Display_Size + "\n" + \
  "Aspect Ratio  = " + DGI_Aspect_Ratio + "\n" + \
  "Frame Rate    = " + DGI_Frame_Rate + "\n" + \
  "Video Type    = " + DGI_Video_Type + "\n" + \
  "Sequence      = " + DGI_Sequence + "\n" + \
  "Frame Struct  = " + DGI_Frame_Struct + "\n" + \
  "Colorimetry   = " + DGI_Colorimetry

(DGI_Field_Order != "__Field_Order__") ? SubTitle(S,lsp=0,font="Courier New") : NOP    # Dont Show Subs if Infos not inserted

Danette · 25th January 2021, 14:35

Thanks, I made the addition.

Unfortunately, after further use, I'm finding that it freezes constantly, even at slower speed settings.

StainlessS · 25th January 2021, 15:12

D,
Find DGIndex_Batcher_DEBUG.7z on SendSpace,
Debug Version, produces a Log file in same directory as exe.
Can you run it, and when freeze, press "SHIFT/CTRL/ALT/PAUSE, to exit batcher.

PAUSE on one of my keyboards requires pressing of a BLUE Fn key [so on that keyboard is 5 keys].

[PAUSE on its own pauses the batcher, and shows "Batcher Paused" type floating ToolTip, and again Un-Pauses it.]

Post the log somewhere please.

EDIT: Its almost certainly not "Frozen", its waiting for something to happen, I need to know what its waiting for.

24th January 2021, 01:15	#67 \| Link
StainlessS HeartlessS Usurer Join Date: Dec 2009 Location: Over the rainbow Posts: 10,980	It on its way, but still got some things to do, sorry for the delay. __________________ I sometimes post sober. StainlessS@MediaFire ::: AND/OR ::: StainlessS@SendSpace "Some infinities are bigger than other infinities", but how many of them are infinitely bigger ???

24th January 2021, 14:57	#71 \| Link
videoh Useful n00b Join Date: Jul 2014 Posts: 1,667	I don't see a signature. Where is it? If for some reason signatures do not show for all users, it's better not to put your links there! I have no idea why signatures are not displayed for me. Google it, I'm not the only one reporting no signatures showing. Last edited by videoh; 24th January 2021 at 15:30.

24th January 2021, 16:36	#73 \| Link
StainlessS HeartlessS Usurer Join Date: Dec 2009 Location: Over the rainbow Posts: 10,980	Thank you gonca and vh, Post was only intended for danette. EDIT: Seems to work OK on old DGIndex and new one. __________________ I sometimes post sober. StainlessS@MediaFire ::: AND/OR ::: StainlessS@SendSpace "Some infinities are bigger than other infinities", but how many of them are infinitely bigger ???

24th January 2021, 23:07	#76 \| Link
StainlessS HeartlessS Usurer Join Date: Dec 2009 Location: Over the rainbow Posts: 10,980	Did not even know it had a playback speed thingy. Probably Batcher is waiting for something that has already happened, I'll take a look. Thanks. EDIT: So you are saying that it creates d2v file faster when on fast playback ? or does it hang when its doing the preparatory preview scan to get info from the Information window. EDIT: Do you have it doing the insert Infos whotsit, ie preview scan? [as in, insert into Template thingy] EDIT: Also, you're doing ordinary Mpegs, not joining vobs from DVD ? EDIT: It works OK without the fast Preview scan option set in DGIndex ? EDIT: What exact setting do you have in the GUI ? EDIT: Does the preview finish entirely, [ie real small clip, and fast machine] when it stalls ? Is it stalling on eg VIDEO_TS.VOB or VTS_01_0.IFO, ie on VERY SHORT menu ? __________________ I sometimes post sober. StainlessS@MediaFire ::: AND/OR ::: StainlessS@SendSpace "Some infinities are bigger than other infinities", but how many of them are infinitely bigger ??? Last edited by StainlessS; 25th January 2021 at 02:09.

25th January 2021, 02:59	#77 \| Link
Danette Registered User Join Date: Apr 2013 Posts: 346	Yes, the playback speed is under “Options”. I’ve also run a number of different tests comparing the two versions. As far as a comparison of DGIndex 2.0.0.3 to DGIndex 1.5.8 goes, I don’t see where there is a speed improvement in DGIndex viewing itself. When I run a preview, DGIndex 1.5.8 consistently runs 20% faster - repeat: the old version is faster. The “save project” function is 30% faster on DGIndex 1.5.8 vs. DGIndex 2.0.0.3. Is the speed improvement delivered at the d2v processing point in Avisynth as a result of an improved d2v file (which would be great)? When I run DGIndex 2.0.0.3 / DGIndex Batcher 1.20 on the 37 files, I get a 5% faster time than when using DGIndex 1.5.8 / DGIndex Batcher 1.18. How this can be, in view of the above paragraph, I have no idea. The time, and the time difference, is the same no matter what speed setting I use in both versions. However, when I use the “maximum” speed setting in DGIndex 2.0.0.3, that causes the crash in DGIndex Batcher 1.20. When I use the “maximum” speed setting in DGIndex 1.5.8, there is no crash in DGIndex Batcher 1.18. When I use the “normal” or “slow” speed settings in DGIndex 2.0.0.3, there is no crash in DGIndex Batcher 1.20. After thinking about this, since there seems to be little difference in the time it takes to process files with DGIndex Batcher 1.20 vs. DGIndex Batcher 1.18, I don’t see any reason to have either version of DGIndex’s playback speed set at “maximum.” In fact, I’m not clear on what benefit there is to moving up from DGIndex 1.5.8 to DGIndex 2.0.0.3 (unless there is a resultant d2v file processing uptick). If anyone can clarify, I’d be very interested. Answering the other questions you asked: - Join sets must start from 1, insert info and correct field order transition are checked (same as in DGIndex Batcher 1.18). - When it hangs, it does so just as the second scan of a file begins. Sometimes it gets through several files ok, before it hangs on the next file. - Did I answer the question on the exact GUI setting? - I’m processing MPEG files only. Last edited by Danette; 25th January 2021 at 03:03.

23rd January 2021, 18:55	#66 \| Link
Danette Registered User Join Date: Apr 2013 Posts: 346	Thanks.

24th January 2021, 11:40	#69 \| Link
videoh Useful n00b Join Date: Jul 2014 Posts: 1,667	Not seeing a SendSpace link.

24th January 2021, 14:44	#70 \| Link
gonca Registered User Join Date: Jul 2012 Posts: 1,213	It is in the signature StainlessS Your finger must have slipped when you typed MeGUI, it came out MedGUI

24th January 2021, 15:36	#72 \| Link
videoh Useful n00b Join Date: Jul 2014 Posts: 1,667	Never mind. I had signature display disabled in my profile. And I don't recall doing that! Still, that's a good reason not to put your links exclusively in your signature.

24th January 2021, 22:58	#75 \| Link
Danette Registered User Join Date: Apr 2013 Posts: 346	When DGIndex 2.0.0.3 is set to *normal* playback speed, DGIndex Batcher 1.20 processes files about 5% faster than when DGIndex 1.5.8 was set to *maximum* playback speed and DGIndex Batcher 1.18 was used. I ran 37 files (each file is a 25 minute TV episode), several times, and found this to hold. However, when DGIndex 2.0.0.3 is set to *maximum* speed, DGIndex Batcher 1.20 freezes after 1-2 episodes, most often during processing of the first episode. I tried many times and rebooted my Win 7 computer, as well.

25th January 2021, 04:49	#78 \| Link
StainlessS HeartlessS Usurer Join Date: Dec 2009 Location: Over the rainbow Posts: 10,980	Make sure that you have all settings identical in both versions of DGIndex. I've been making some Mpeg files [re-encoded from MP4], I'll test some tomorrow. Here, small mod to the template script, does not show Info subtitles if Batcher Insert Info is not turned on. Make this change to subtitle Line Code: S= \ "Field Order = " + DGI_Field_Order + "\n" + \ "Stream Type = " + DGI_Stream_Type + "\n" + \ "Profile = " + DGI_Profile + "\n" + \ "Frame Size = " + DGI_Frame_Size + "\n" + \ "Display Size = " + DGI_Display_Size + "\n" + \ "Aspect Ratio = " + DGI_Aspect_Ratio + "\n" + \ "Frame Rate = " + DGI_Frame_Rate + "\n" + \ "Video Type = " + DGI_Video_Type + "\n" + \ "Sequence = " + DGI_Sequence + "\n" + \ "Frame Struct = " + DGI_Frame_Struct + "\n" + \ "Colorimetry = " + DGI_Colorimetry (DGI_Field_Order != "__Field_Order__") ? SubTitle(S,lsp=0,font="Courier New") : NOP # Dont Show Subs if Infos not inserted __________________ I sometimes post sober. StainlessS@MediaFire ::: AND/OR ::: StainlessS@SendSpace "Some infinities are bigger than other infinities", but how many of them are infinitely bigger ??? Last edited by StainlessS; 25th January 2021 at 04:53.

25th January 2021, 14:35	#79 \| Link
Danette Registered User Join Date: Apr 2013 Posts: 346	Thanks, I made the addition. Unfortunately, after further use, I'm finding that it freezes constantly, even at slower speed settings.

25th January 2021, 15:12	#80 \| Link
StainlessS HeartlessS Usurer Join Date: Dec 2009 Location: Over the rainbow Posts: 10,980	D, Find DGIndex_Batcher_DEBUG.7z on SendSpace, Debug Version, produces a Log file in same directory as exe. Can you run it, and when freeze, press "SHIFT/CTRL/ALT/PAUSE, to exit batcher. PAUSE on one of my keyboards requires pressing of a BLUE Fn key [so on that keyboard is 5 keys]. [PAUSE on its own pauses the batcher, and shows "Batcher Paused" type floating ToolTip, and again Un-Pauses it.] Post the log somewhere please. EDIT: Its almost certainly not "Frozen", its waiting for something to happen, I need to know what its waiting for. __________________ I sometimes post sober. StainlessS@MediaFire ::: AND/OR ::: StainlessS@SendSpace "Some infinities are bigger than other infinities", but how many of them are infinitely bigger ??? Last edited by StainlessS; 25th January 2021 at 15:25.