BD Rebuilder Beta - Bug Reports Only

[RoyGBiv-inRI]

I recently did a fresh install of Win10. I installed AviSynth and LAV filters, but now I get the following error with BDRebuilder. After it re-encodes it stops at the point where it is trying to rebuild the BD file structure. I get the error message:

BD Rebuilder experienced an error 1200 14:04:34
Copydirstructure () 00076 1200

Here is the associated log:

[01/24/23] BD Rebuilder v0.61.21
[12:13:07] Source: S4D1
- Input BD size: 38.80 GB
- Approximate total content: [02:55:46.235]
- Target BD size: 22.95 GB
- Windows Version: 6.2 [9200]
- Quality: High Quality (Default), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:13:07] PHASE ONE, Encoding
- [12:13:07] Processing: VID_00012 (1 of 4)
- [12:13:07] Extracting A/V streams [VID_00012]
- [12:17:14] Reencoding video [VID_00012]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 82,777 frames
- Bitrate: 14,862 Kbs
- [12:17:14] Reencoding: VID_00012, Pass 1 of 1
- [12:48:17] Video Encode complete
- [12:48:17] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [12:48:17] Multiplexing M2TS
- [12:49:26] Processing: VID_00013 (2 of 4)
- [12:49:26] Extracting A/V streams [VID_00013]
- [12:53:33] Reencoding video [VID_00013]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 78,000 frames
- Bitrate: 15,683 Kbs
- [12:53:33] Reencoding: VID_00013, Pass 1 of 1
- [13:24:14] Video Encode complete
- [13:24:14] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [13:24:14] Multiplexing M2TS
- [13:25:24] Processing: VID_00021 (3 of 4)
- [13:25:24] Extracting A/V streams [VID_00021]
- [13:25:31] Reencoding video [VID_00021]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 5,876 frames
- Bitrate: 2,187 Kbs
- [13:25:31] Reencoding: VID_00021, Pass 1 of 1
- [13:25:56] Video Encode complete
- [13:25:56] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [13:25:56] Multiplexing M2TS
- [13:26:00] Processing: VID_00031 (4 of 4)
- [13:26:00] Extracting A/V streams [VID_00031]
- [13:30:19] Reencoding video [VID_00031]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 83,137 frames
- Bitrate: 15,834 Kbs
- [13:30:19] Reencoding: VID_00031, Pass 1 of 1
- [14:03:11] Video Encode complete
- [14:03:11] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [14:03:11] Multiplexing M2TS
[14:04:34]PHASE ONE complete
[14:04:34]PHASE TWO - Rebuild Started
- [14:04:34] Rebuilding BD file Structure
- [14:04:34] CopyDirStructure() 00076 1200

I'm sure I'm just doing something stupid, but can someone help with this problem. I've tried uninstalling and re installing AviSynth and LAV filters. The first time I used BDRebuilder I did run it as administrator and it gave me the usual message about configuring the filters.

I don't know what else to try.

Thanks for any help.

Your Obedient Servant
SMK

[Emulgator]

BD-RB 0.61.21? BD-RB is at 0.61.28 atm, maybe you want to try the recent one first.

[RoyGBiv-inRI]

Actually, I've tried three different versions; 19, 21, and 28. The same thing happens with all 3, but I just happened to post the log from 21.

Your Obedient Servant
SMK

[RoyGBiv-inRI]

Doing a search I found some posts from a few years ago with the same problem. That individual seemed to have resolution by changing to the "required" versions of AVISynth and LAV filters. I had been using those versions, but just to be sure I downloaded them again as well as a new copy of BDRB 21 zip file. I uninstalled AVISynth and LAV filters and reinstalled the newly downloaded versions from the first page and then extracted a new version of BDRB 21. The problem is still exactly the same.

In those earlier posts JDobbs referred to a possible issue with where the files were located or that the file names were too long. I have no idea what files he meant or where these files are located, but I can tell you that everything was installed onto its default folders. I also have done this exact setup a few times before with Win10 and have had no problems.

Your Obedient Servant
SMK

[nil]

Hi. I posted this two weeks ago, unsure of whether to post it in this thread or not; I've not had any responses there, so here we go...

Short version: when reencoding to AAC audio, BD Rebuilder generates a temporary file called audio1.bat which runs faac.exe. This fails for me, because it includes the command line option -br 384000, when the online documentation and command-line help say the option should be -b 384.

What I don't understand is how it used to work fine for me; I had assumed I must have changed something on my PC (broken by a Windows update or something), but I'm running BD Rebuilder's faac.exe (which hasn't changed in a while anyway), and that option is definitely wrong. Utterly confused.

Full details in the other thread.

Many thanks for your help.

[RoyGBiv-inRI]

I don't know where JDobbs and the others who usually are in this thread are, but here is an interesting update. If I set BDRB to put the finished product on a different drive, it works fine. It doesn't matter which drive or how long the path is to that drive, but it works. OTOH, any time I try to put the finished product in the same drive the original files are in, no matter what folder, I get the above error message.

Strange, but since I have a work around, I can at least use BDRB.

Your Obedient Servant
SMK

[Emulgator]

Drive full ?

[Mike-uk]

@jdobbs

Originally Posted by nil

Hi. I posted this two weeks ago, unsure of whether to post it in this thread or not; I've not had any responses there, so here we go...

no solution but ive the same problem

"C:\Users\xxx\Desktop\BD_Rebuilder\tools\wavi.exe" "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AVS" - | "C:\Users\xxx\Desktop\BD_Rebuilder\tools\faac.exe" - -br 128000 -o "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AAC"


- [17:45:29] Reencoding: VID_00000, Pass 1 of 1
- [17:45:35] Video Encode complete
- [17:45:35] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AAC...
[17:47:45] - Failed to reencode audio, aborted

[AmigaFuture]

Hello.

I've been going through some of my older BD rips and making MKVs. I've noticed some Movie & Menus processed BDs won't allow making an MKV. Star Wars - 1, 2, and 3 for example. So I got out my discs..and I reripped them. MKVs can by made from the fresh rip without a problem as long as they aren't processed by BD-RB. My logs..

[01/29/23] BD Rebuilder v0.61.28
[12:54:40] Source:  ATTACK_OF_THE_CLONES_O
  - Input BD size: 45.55 GB
  - Approximate total content: [02:51:24.606]
  - Target BD size: 46.26 GB
  - Windows Version: 6.2 [9200]
  - MOVIE and MENUS mode enabled
  - Quality: High Quality (Default), Two Pass
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[12:54:40] PHASE ONE, Encoding
 - [12:54:40] Blanking: VID_00050 (1 of 73)
 - [12:54:40] Blanking: VID_00190 (2 of 73)
 - [12:54:40] Blanking: VID_00101 (3 of 73)
[...Snip...]
- [12:56:23] Processing: VID_00882 (72 of 73)
 - [12:56:23] Extracting A/V streams [VID_00882]
 - [12:56:30] Reencoding video [VID_00882]
 - [12:56:30] Keeping original video (no reencode)
 - [12:56:30] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [12:56:30] Multiplexing M2TS
 - [12:56:36] Processing: VID_00800 (73 of 73)
 - [12:56:36] Extracting A/V streams [VID_00800]
 - [12:59:56] Reencoding video [VID_00800]
 - [12:59:56] Keeping original video (no reencode)
 - [12:59:56] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [12:59:56] Multiplexing M2TS
[13:02:53]PHASE ONE complete
[13:02:53]PHASE TWO - Rebuild Started
 - [13:02:53] Rebuilding BD file Structure
[13:02:56] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:02:59] JOB: ATTACK_OF_THE_CLONES_O finished.

Make MKV from processed..

[01/29/23] BD Rebuilder v0.61.28
[13:08:09] Source:  ATTACK_OF_THE_CLONES_O_00800
  - Input BD size: 32.70 GB
  - Approximate total content: [02:22:27.872]
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV, Intact Video, Intact Audio
  - Quality: High Quality (Default)
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:08:09] PHASE ONE, Encoding
 - [13:08:09] Processing: VID_00882 (1 of 2)
 - [13:08:09] Extracting A/V streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
   - Extracting video streams [VID_00882]
   - Extracting audio/subtitle streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
   - Extracting audio streams [VID_00882]
  - TSMUXER ERR: 0xFFFFFFFE
 - Error in attempt to extract audio.
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
 - Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: P:\ATTACK_OF_THE_CLONES_O\BDMV\\STREAM\00882.m2ts
[13:09:09] - Failed to retrieve audio, aborted

Make MKV from fresh rip and not processed..

[01/29/23] BD Rebuilder v0.61.28
[13:11:28] Source:  ATTACK_OF_THE_CLONES_O_00800
  - Input BD size: 40.29 GB
  - Approximate total content: [02:22:27.872]
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV, Intact Video, Intact Audio
  - Quality: High Quality (Default)
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:11:29] PHASE ONE, Encoding
 - [13:11:29] Processing: VID_00882 (1 of 2)
 - [13:11:29] Extracting A/V streams [VID_00882]
 - [13:13:29] Reencoding video [VID_00882]
 - [13:13:29] Keeping original video (no reencode)
 - [13:13:29] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (eng): Keeping original audio
   - Track 4358 (eng): Keeping original audio
   - Track 4359 (eng): Keeping original audio
 - [13:13:29] Processing: VID_00800 (2 of 2)
 - [13:13:29] Extracting A/V streams [VID_00800]
 - [13:16:35] Reencoding video [VID_00800]
 - [13:16:35] Keeping original video (no reencode)
[13:16:35]PHASE ONE complete
[13:16:35]PHASE TWO - Rebuild Started
 - [13:16:35] Building ALTERNATE OUTPUT Structure
[13:25:57] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:25:57] JOB: ATTACK_OF_THE_CLONES_O finished.

[MrVideo]

You might need to replace the BDRB supplied tsmuxer with a newer snapshot. Yes, it might mean having to do some other workarounds, but it should handle the audio. Worth a try.

[tebasuna51]

Originally Posted by Mike-uk

no solution but ive the same problem

"C:\Users\xxx\Desktop\BD_Rebuilder\tools\wavi.exe" "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AVS" - | "C:\Users\xxx\Desktop\BD_Rebuilder\tools\faac.exe" - -br 128000 -o "C:\USERS\xxx\DOCUMENTS\BD\WORKFILES\AUD_00000_4352.AAC"

Of course the faac syntax is -b 128 (instead -br 128000) with a max of 500 (kb) for a stereo input.

BTW the faac encoder is not recommended, use qaac or fdkaac with better quality and until 7.1 audio. Also ffmpeg (v3 or higher) until 5.1 audio.

[AmigaFuture]

Originally Posted by MrVideo

You might need to replace the BDRB supplied tsmuxer with a newer snapshot. Yes, it might mean having to do some other workarounds, but it should handle the audio. Worth a try.

I'm cool with workarounds. I noticed that if I disable the AC-3's and keep DTS..an MKV will be made okay. Then do it again in reverse, disable DTS and keep AC-3's..then put them together. There are other ways, also. I went checking for a newer TsMUXER..but then I got sidetracked by having to do some other stuff not computer related. I'll have another look.

[AmigaFuture]

Nope, the new TsMuxer is the problem. I got it and the GUI archive. It has the same error.

[MrVideo]

Weird that there is an issue with the processed files. If directly going to a MKV file works, why not just use it?