RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 491

Atak_Snajpera · 2nd July 2011, 20:02

I see no error message in your log.

mrpitman · 2nd July 2011, 20:27

Its not causing errors, but its making my BDMV moves hiccup throughout the movie. When you wave your mouse over the other copies they just go away like when something just crashed and it was a copy in the task bar you waive mouse over it and disappears off your screen. Is the 2nd pass trying to open a copy and overwrites itself and crashes

benjyv · 2nd July 2011, 20:52

@mrpitman

Have you checked for viruses ??? Try to make a cleaning of your system !!!

mrpitman · 2nd July 2011, 23:07

Quote:

Originally Posted by benjyv

@mrpitman

Have you checked for viruses ??? Try to make a cleaning of your system !!!

Did you not read what I stated earlier? It's a new install.

nekrosoft13 · 3rd July 2011, 01:43

Quote:

Originally Posted by Atak_Snajpera

@nekrosoft13
change --sar 4:3 to --sar 1:1 in jobx_EncodeVideoPass1.cmd and jobx_EncodeVideoPass2.cmd (if necessary)

thanks!!

would it be possible to add this option and correct frame rate (like when 30fps sometimes gets detected as 24fps, and video ends up longer then video) right into future version in the GUI?

ArieS1204 · 3rd July 2011, 07:21

Quote:

Originally Posted by ArieS1204

I'm having an issue and it's driving me nuts!
I'm trying to back up my BD of Supernatural Season 1 Disc 1.
Instead of being 6 files it is one big ass file of 4h20mins.
So after encoding it with Ripbot I tried to split it in 6 files with MkvMerge by timelines but starting with file 2 the audio is way out of sync.
How do you guys do it?

Anyone?

AiDz0r · 3rd July 2011, 11:15

Hi there, I've installed [AviSynth v.2.5.8 MT, 64-bit] , [ffdshow_rev3914_20110629_clsid_x64.exe] , and [Haali Media Splitter 32-bit]. I actually wanted to get the full potential by installing the 64-bits, however when I try to open RipBot264, I get "Not Installed" for FFDshow is it because it must be 32 bit? Because if FFDshow has to be 32-bit then i have to make AviSynth 32-bit also, because AviSynth requires and reccomends FFDshow x64.

Atak_Snajpera · 3rd July 2011, 12:52

Everything MUST be 32 bit!!!

AiDz0r · 3rd July 2011, 15:25

oh nooo! Should i just uninstall everything then reinstall in 32 bit?

pacaveli211 · 3rd July 2011, 15:26

Quote:

Originally Posted by ArieS1204

I'm having an issue and it's driving me nuts!
I'm trying to back up my BD of Supernatural Season 1 Disc 1.
Instead of being 6 files it is one big ass file of 4h20mins.
So after encoding it with Ripbot I tried to split it in 6 files with MkvMerge by timelines but starting with file 2 the audio is way out of sync.
How do you guys do it?

I'd probably demux each episode and then encode them separately. copying the m2ts to hdd and then renaming to .ts might be even easier.
...something like that is what I'd do. I'm not really sure how the disc is setup
make sure after ripbot scans the disc that you are choosing the right playlist(s) (scan with bdinfo)
there might be a playlist to play ALL of the episodes. if so...and if you're choosing that playlist, that'd account for why you end up with one big file contain all the episodes =)

crackinhedz · 3rd July 2011, 22:33

Quote:

Originally Posted by pacaveli211

there might be a playlist to play ALL of the episodes. if so...and if you're choosing that playlist, that'd account for why you end up with one big file contain all the episodes =)

This is probably what happened, selected the "play all" file...which is just one large file with all episodes...should have copied just each individual episode by itself.

I figured this out with "Lost".

Sh4d3 · 4th July 2011, 12:00

Quote:

Originally Posted by Atak_Snajpera

Your sample works without any problems. So I have no solution for you at the moment.

I think I may have found a solution; seems I used the "weightb" switch incorrectly in the custom profile. I removed it and re-ran the job. Seems to be working now. I'll post an update when its finished.

Atak_Snajpera · 4th July 2011, 12:29

Quote:

I think I may have found a solution; seems I used the "weightb" switch incorrectly in the custom profile. I removed it and re-ran the job. Seems to be working now. I'll post an update when its finished.

Well I'm not surprised. It's not first time when user is in fact responsible for not working ripbot264.

Sh4d3 · 4th July 2011, 15:40

It's a learning process.

ArieS1204 · 4th July 2011, 19:40

Quote:

Originally Posted by pacaveli211

I'd probably demux each episode and then encode them separately. copying the m2ts to hdd and then renaming to .ts might be even easier.
...something like that is what I'd do. I'm not really sure how the disc is setup
make sure after ripbot scans the disc that you are choosing the right playlist(s) (scan with bdinfo)
there might be a playlist to play ALL of the episodes. if so...and if you're choosing that playlist, that'd account for why you end up with one big file contain all the episodes =)

Thanks, I'll do that.

ArieS1204 · 4th July 2011, 19:41

Quote:

Originally Posted by crackinhedz

This is probably what happened, selected the "play all" file...which is just one large file with all episodes...should have copied just each individual episode by itself.

I figured this out with "Lost".

Actually no, this was the only track available.
It seems Warner does it like that as this is the same with Chuck, Fringe, etc...

Sh4d3 · 5th July 2011, 06:24

@Atak_Snajpera:
I finally got it working. It was all my fault. It didn't really occur to me that I should double check my profile settings until the exact same problem started happening with a another rip. The thing that bugged me the most was how cryptic x264's error messages seem. Like

Code:

x264 [error]: could not open input file `1'

which looking back now was probably just referring to an error with one of the options or its value- in this case "weightb 1" and not the actual input file. So is it safe to assume that this feature is always on?

znelbok · 7th July 2011, 05:22

Hi all

I have just started with BR so I may have missed something simple here very easily. I apologise if this has been asked, but this thread is 100+ pages long and is too long to read through on a 64K connection.

I am trying to use ripbot on an XP SP3 machine.

I had to install Java, FFDshow etc, to get it to load up.

WHen I start a job, it runs for a couple of seconds and finishes. Know I know its not a super computer so I went looking into the logs and found this

Error: The source file 'D:\Temp\RipBot264temp\video.264' could not be opened successfully, or retrieving its size by seeking to the end did not work.

Checking the directory, there is indeed no video.264 file there.

How do I fix this problem, what have I done wrong.

Thanks

Mick

dbone1026 · 7th July 2011, 13:46

Quote:

Originally Posted by ArieS1204

I'm having an issue and it's driving me nuts!
I'm trying to back up my BD of Supernatural Season 1 Disc 1.
Instead of being 6 files it is one big ass file of 4h20mins.
So after encoding it with Ripbot I tried to split it in 6 files with MkvMerge by timelines but starting with file 2 the audio is way out of sync.
How do you guys do it?

Thats odd, RIpbot264 should see the individual playlists (i.e. one per episode). Another option, use MakeMKV t o rip out the individual episodes, and then put through Ripbot. I had no issues with the Supernatural BR discs.

pacaveli211 · 7th July 2011, 13:55

znelbok -
paste the full log
you're not out of space on D: are you?

2nd July 2011, 20:02	#9801 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	I see no error message in your log. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

2nd July 2011, 20:27	#9802 \| Link
mrpitman Registered User Join Date: Feb 2009 Posts: 34	Its not causing errors, but its making my BDMV moves hiccup throughout the movie. When you wave your mouse over the other copies they just go away like when something just crashed and it was a copy in the task bar you waive mouse over it and disappears off your screen. Is the 2nd pass trying to open a copy and overwrites itself and crashes Last edited by mrpitman; 2nd July 2011 at 20:31.

3rd July 2011, 11:15	#9807 \| Link
AiDz0r ⃪ ͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤ ͤͤ Join Date: Nov 2009 Location: Australia Posts: 54	Hi there, I've installed [AviSynth v.2.5.8 MT, 64-bit] , [ffdshow_rev3914_20110629_clsid_x64.exe] , and [Haali Media Splitter 32-bit]. I actually wanted to get the full potential by installing the 64-bits, however when I try to open RipBot264, I get "Not Installed" for FFDshow is it because it must be 32 bit? Because if FFDshow has to be 32-bit then i have to make AviSynth 32-bit also, because AviSynth requires and reccomends FFDshow x64. __________________ Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away. Last edited by AiDz0r; 3rd July 2011 at 11:21. Reason: wth?

3rd July 2011, 12:52	#9808 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	Everything MUST be 32 bit!!! __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

3rd July 2011, 15:25	#9809 \| Link
AiDz0r ⃪ ͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤͤ ͤͤ Join Date: Nov 2009 Location: Australia Posts: 54	oh nooo! Should i just uninstall everything then reinstall in 32 bit? __________________ Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.

2nd July 2011, 20:52	#9803 \| Link
benjyv Registered User Join Date: Oct 2009 Posts: 212	@mrpitman Have you checked for viruses ??? Try to make a cleaning of your system !!!

4th July 2011, 15:40	#9814 \| Link
Sh4d3 Registered User Join Date: May 2011 Location: Japan Posts: 21	It's a learning process.

5th July 2011, 06:24	#9817 \| Link
Sh4d3 Registered User Join Date: May 2011 Location: Japan Posts: 21	@Atak_Snajpera: I finally got it working. It was all my fault. It didn't really occur to me that I should double check my profile settings until the exact same problem started happening with a another rip. The thing that bugged me the most was how cryptic x264's error messages seem. Like Code: x264 [error]: could not open input file `1' which looking back now was probably just referring to an error with one of the options or its value- in this case "weightb 1" and not the actual input file. So is it safe to assume that this feature is always on?

7th July 2011, 05:22	#9818 \| Link
znelbok Registered User Join Date: Jun 2004 Posts: 2	Hi all I have just started with BR so I may have missed something simple here very easily. I apologise if this has been asked, but this thread is 100+ pages long and is too long to read through on a 64K connection. I am trying to use ripbot on an XP SP3 machine. I had to install Java, FFDshow etc, to get it to load up. WHen I start a job, it runs for a couple of seconds and finishes. Know I know its not a super computer so I went looking into the logs and found this Error: The source file 'D:\Temp\RipBot264temp\video.264' could not be opened successfully, or retrieving its size by seeking to the end did not work. Checking the directory, there is indeed no video.264 file there. How do I fix this problem, what have I done wrong. Thanks Mick Last edited by znelbok; 7th July 2011 at 05:25.

7th July 2011, 13:55	#9820 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	znelbok - paste the full log you're not out of space on D: are you?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode