InpaintDelogo - advanced logo removal & hardcoded subtitles extraction - Page 39

VoodooFX · 5th May 2023, 02:32

Quote:

Originally Posted by drunksunk

I tried this but I get error "increase analyzeth" and i increase to 100 but nothing changed.

OK, thanks for letting me know.

drunksunk · 7th May 2023, 01:25

Doesn't the same command work well for opaque logos?

VoodooFX · 7th May 2023, 13:06

Quote:

Originally Posted by drunksunk

Doesn't the same command work well for opaque logos?

Those settings are for a transparent logo [for that another video]. Anyway, for an "automask" run most of them are not used.
That error could mean that coords are wrong or there are no suitable frames to analyze. Set Analyze=3 to analyze all frames.
You better share the video or you'll have thousand other questions and I don't have a crystal ball to answer them.

drunksunk · 7th May 2023, 20:10

The video is this one: https://forum.doom9.org/showpost.php...&postcount=707

VoodooFX · 7th May 2023, 20:14

Quote:

Originally Posted by drunksunk

The video is this one: https://forum.doom9.org/showpost.php...&postcount=707

There is no video.

drunksunk · 10th May 2023, 01:36

Quote:

Originally Posted by VoodooFX

There is no video.

It's actually a video you edited yourself. Anywhere it was archived on Streamable so I reuploaded it here.

VoodooFX · 11th May 2023, 01:13

Quote:

Originally Posted by drunksunk

It's actually a video you edited yourself.

I couldn't edit video you never shared. I edited your image!
Anyway this logo is not a logo but some special effect from game, whole area around those letters has some effects.
You better use DoomDelogo for this.

drunksunk · 11th May 2023, 09:57

Quote:

Originally Posted by VoodooFX

I couldn't edit video you never shared. I edited your image!
Anyway this logo is not a logo but some special effect from game, whole area around those letters has some effects.
You better use DoomDelogo for this.

I know for a fact that it's a logo added on top because I have another video which is identical but without the logo. The only issue is that it's lower quality.

poisondeathray · 11th May 2023, 13:43

Quote:

Originally Posted by drunksunk

I know for a fact that it's a logo added on top because I have another video which is identical but without the logo. The only issue is that it's lower quality.

How much "lower quality" ? Did you try align & merging them with a mask ?

VoodooFX · 11th May 2023, 15:35

Quote:

Originally Posted by drunksunk

I have another video which is identical but without the logo.

Then share this another video.

poisondeathray · 11th May 2023, 16:42

Quote:

Originally Posted by VoodooFX

Anyway this logo is not a logo but some special effect from game, whole area around those letters has some effects.

It looks like some of the artifacts are from motion interpolation. They correspond to the errors in other parts of the frame on the odd frames . The other artifacts around the logo are compression artifacts. The original video is 30fps .

VoodooFX · 11th May 2023, 18:53

Whatever this is, for me it looks like there is some blend around area then inconsistent blur on to it. Nothing left to deblend, even if it was clean blend then clip is too short to build deblend mask.
Whole area needs to by treated as a one big hole, I don't even know what inpaint settings should be used on such, if found they probably would be very slow.
When I was thinking about "Turbo" argument I had idea to dowsample stuff then inpaint, maybe such approach would work here.

drunksunk · 17th May 2023, 02:34

Is it better to use InpaintDelogo before or after an AI Upscaler like Topaz AI Video?

kedautinh12 · 17th May 2023, 02:37

I think before and if your video interlaced, you need deinterlaced before use InpaintDelogo

VoodooFX · 17th May 2023, 10:46

Quote:

Originally Posted by drunksunk

Is it better to use InpaintDelogo before or after an AI Upscaler like Topaz AI Video?

Before. But better is to not use upscaler at all.

drunksunk · 17th May 2023, 22:00

I thought that with higher resolution and crispier edges the result would be better? Anyway, can't get a good mask out of this: https://i.imgur.com/6MrRVZu.png

Mask: https://i.imgur.com/Yej7xi2.png

Maybe I should create it manually with Photoshop?

I'm using this:

InpaintDelogo(Loc="1570,910,-30,-60", mask="D:\mask.bmp", Automask=1, aMix=-2, AnalyzeTh=100, mode="Deblend", dPP=-5, Interp=3, Optimize2=2)

VoodooFX · 17th May 2023, 23:01

You are using parameters from another logo, this is not how it works. Read the manual!

drunksunk · 18th May 2023, 15:27

Quote:

Originally Posted by VoodooFX

You are using parameters from another logo, this is not how it works. Read the manual!

Do I just need to lower AnalyzeTh to fix it?

katzenjoghurt · 18th May 2023, 18:55

Quote:

Originally Posted by drunksunk

Do I just need to lower AnalyzeTh to fix it?

With AnalyzeTh=255 pretty much all frames should be analyzed.

Easier:

InpaintDelogo(Loc="1570,910,-30,-60", mask="D:\mask.bmp", mode="Deblend", Automask=1, Analyze=3)

Analyze=3 will also analyze all frames. Default is 2.

VoodooFX · 18th May 2023, 21:42

Quote:

Originally Posted by drunksunk

Do I just need to lower AnalyzeTh to fix it?

There is no magic button to "fix it", there are many ways for many different videos, you need to understand what the arguments do to get desired result.

Without video you are on your own.

11th May 2023, 18:53	#772 \| Link
VoodooFX Banana User Join Date: Sep 2008 Posts: 920	Whatever this is, for me it looks like there is some blend around area then inconsistent blur on to it. Nothing left to deblend, even if it was clean blend then clip is too short to build deblend mask. Whole area needs to by treated as a one big hole, I don't even know what inpaint settings should be used on such, if found they probably would be very slow. When I was thinking about "Turbo" argument I had idea to dowsample stuff then inpaint, maybe such approach would work here. __________________ InpaintDelogo, DoomDelogo, JerkyWEB Fixer, Standalone Faster-Whisper - AI subtitling

17th May 2023, 23:01	#777 \| Link
VoodooFX Banana User Join Date: Sep 2008 Posts: 920	You are using parameters from another logo, this is not how it works. Read the manual! __________________ InpaintDelogo, DoomDelogo, JerkyWEB Fixer, Standalone Faster-Whisper - AI subtitling

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

7th May 2023, 01:25	#762 \| Link
drunksunk Registered User Join Date: Apr 2023 Posts: 60	Doesn't the same command work well for opaque logos?

7th May 2023, 20:10	#764 \| Link
drunksunk Registered User Join Date: Apr 2023 Posts: 60	The video is this one: https://forum.doom9.org/showpost.php...&postcount=707

17th May 2023, 02:34	#773 \| Link
drunksunk Registered User Join Date: Apr 2023 Posts: 60	Is it better to use InpaintDelogo before or after an AI Upscaler like Topaz AI Video?

17th May 2023, 02:37	#774 \| Link
kedautinh12 Registered User Join Date: Jan 2018 Posts: 2,085	I think before and if your video interlaced, you need deinterlaced before use InpaintDelogo

17th May 2023, 22:00	#776 \| Link
drunksunk Registered User Join Date: Apr 2023 Posts: 60	I thought that with higher resolution and crispier edges the result would be better? Anyway, can't get a good mask out of this: https://i.imgur.com/6MrRVZu.png Mask: https://i.imgur.com/Yej7xi2.png Maybe I should create it manually with Photoshop? I'm using this: InpaintDelogo(Loc="1570,910,-30,-60", mask="D:\mask.bmp", Automask=1, aMix=-2, AnalyzeTh=100, mode="Deblend", dPP=-5, Interp=3, Optimize2=2)