Madvr settings help

maiden · 23rd November 2017, 06:23

Video Card GTX750i
I would love some help with madvr settings.
I have an onkyo connected to the system and I dont understand why in madvr it shows up as the display.
My lg 55cm tv does not show
my nvidia is set to 60hz
I am in Australia

huhn · 23rd November 2017, 10:25

Quote:

I would love some help with madvr settings.

and what would you like to know?

Quote:

I have an onkyo connected to the system and I dont understand why in madvr it shows up as the display.

well that'S what the PC is connected to.
so you just send the signal to the AVR and the AVR does what it does. thia should be fine don't think to much about it.

Quote:

My lg 55cm tv does not show

it's behind the AVR isn't it?

chros · 23rd November 2017, 13:48

Quote:

Originally Posted by huhn

it's behind the AVR isn't it?

And is it turned ON and set to the proper input?

Create an extended desktop config at first in Windows and see if it works that way.

maiden · 23rd November 2017, 23:44

the Onkyo is turned on and set to the proper input or I doubt anything would play.

I have created an extended desktop config at first in Windows but it doesnt show any properties.

I was wondering if I should be matching the tv etc with the onkyo display properties

deSiem · 14th December 2017, 14:49

You should mark/set the onkyo as 'AVR' in madvr settings. This will then show 'display connected to Onkyo' which is your LG.

maiden · 15th December 2017, 00:24

I will do that. thanks

maiden · 15th December 2017, 01:00

There is no avr but I am guessing that is the receiver,processor, switch.
Under the onkyo there are two unknown one says generic non pnp monitor the other says display connected to onkyo also unknown.
will this affect the way video is played???

23rd November 2017, 06:23	#1 \| Link
maiden Registered User Join Date: Aug 2016 Posts: 19	Madvr settings help Video Card GTX750i I would love some help with madvr settings. I have an onkyo connected to the system and I dont understand why in madvr it shows up as the display. My lg 55cm tv does not show my nvidia is set to 60hz I am in Australia

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23rd November 2017, 23:44	#4 \| Link
maiden Registered User Join Date: Aug 2016 Posts: 19	the Onkyo is turned on and set to the proper input or I doubt anything would play. I have created an extended desktop config at first in Windows but it doesnt show any properties. I was wondering if I should be matching the tv etc with the onkyo display properties

14th December 2017, 14:49	#5 \| Link
deSiem Registered User Join Date: Dec 2013 Posts: 2	You should mark/set the onkyo as 'AVR' in madvr settings. This will then show 'display connected to Onkyo' which is your LG.

15th December 2017, 00:24	#6 \| Link
maiden Registered User Join Date: Aug 2016 Posts: 19	I will do that. thanks

15th December 2017, 01:00	#7 \| Link
maiden Registered User Join Date: Aug 2016 Posts: 19	There is no avr but I am guessing that is the receiver,processor, switch. Under the onkyo there are two unknown one says generic non pnp monitor the other says display connected to onkyo also unknown. will this affect the way video is played???