Delogo (deblend problem)

[color]

Some scenes look awefull (Two above) but the last one is okey.

[kedautinh12]

Originally Posted by color

Some scenes look awefull (Two above) but the last one is okey.

If your logo don't appear in all clip, you can trim only frame have logo appear. After join frame no logo and frame have logo in one
Ex: https://forum.doom9.org/showthread.p...80#post1975980

[color]

Originally Posted by kedautinh12

If your logo don't appear in all clip, you can trim only frame have logo appear. After join frame no logo and frame have logo in one
Ex: https://forum.doom9.org/showthread.p...80#post1975980

Its only first 270 frames is not vissible so I have used trim(270,11579).

What works "best" on some frames are "Inpaint" and "blend" on some. But Inpaint does look off on some frames.

First looks great, but other two, not so much.



I think I should use different and trim and use what works best for every scen instead as you say. I don't think it will work great on all scenes.

[kedautinh12]

With Inpant mode you can try with turbo=-1 and with Deblend you can try some values with IntSpd, Interp, dPP

[kedautinh12]

Or you can try with automask will be better with Analyze

[VoodooFX]

Originally Posted by color

Some scenes look awefull (Two above) but the last one is okey.

Share the full video of that logo, encode with lossless x264 this script:

LWLibavVideoSource("C:\video.mkv")
Crop(1388,944,-280,-24)

[color]

Originally Posted by kedautinh12

With Inpant mode you can try with turbo=-1 and with Deblend you can try some values with IntSpd, Interp, dPP

turbo=-1 did a much better job! I also tried IntSpd, Interp, dPP, but I don't see any difference between the 1-3 value for each also tried all three with deblend.

Originally Posted by kedautinh12

Or you can try with automask will be better with Analyze

I did use automask. I used my own first but I saw automask did a better jobb.

[color]

Originally Posted by VoodooFX

Share the full video of that logo, encode with lossless x264 this script:

LWLibavVideoSource("C:\video.mkv")
Crop(1388,944,-280,-24)

Here you go lossless x264: LINK

I used

ffmpeg -i input -c:v libx264 -preset veryslow -qp 0 output.mkv

[VoodooFX]

Looks like video is too low quality to deblend this logo, you've to use inpaint to delogo:

InpaintDelogo(mask="C:\1.bmp", Loc="1388,944,-280,-24", Mode="Inpaint", Turbo=-1)

Btw, logo has fade in/out animations, so you don't want to analyze such frames for deblend.

[color]

Originally Posted by VoodooFX

Looks like video is too low quality to deblend this logo, you've to use inpaint to delogo:

InpaintDelogo(mask="C:\1.bmp", Loc="1388,944,-280,-24", Mode="Inpaint", Turbo=-1)

Btw, logo has fade in/out animations, so you don't want to analyze such frames for deblend.

Oh, i have not noticed more than the beginning.

Well its the highest quality on the image I got and no other source are available. Do you mean it does fade in and out in the video or do you mean in the beginning only?

I think I do a mix in that case.

Edit: mode "both" did work good on some frames "inpaint" and "deblend" did do bad.

[kedautinh12]

Originally Posted by color

Oh, i habe not noticed more than the beginning.

Well its the highest quality on the image I got and no other source are available. Do you mean it does fade in and out in the video or do you mean in the beginning only?

I think I do a mix in that case.

Edit: mode "both" did work good on some frames "inpaint" and "deblend" did do bad.

Inpaint work better with solid logo or dynamic logo (fade in, fade out). Deblend work better with transparent logo. You use mode both when your logo has transparent and solid

[color]

Originally Posted by kedautinh12

Inpaint work better with solid logo or dynamic logo (fade in, fade out). Deblend work better with transparent logo. You mode both when your logo has transparent and solid

Oh so it flips between solid and transparent. That I did not notice at all. I will still mix, i have exported inpaint, deblend and both, so i go through frame by frame and use whats best. (Exported to png).

[VoodooFX]

Originally Posted by color

Do you mean it does fade in and out in the video or do you mean in the beginning only?

How fade out can be at the beginning? Of course it's at the end.

Originally Posted by color

I think I do a mix in that case.

Yes, maybe Deblend can look better at some few random frames/scenes.

Originally Posted by color

Edit: mode "both" did work good on some frames "inpaint" and "deblend" did do bad.

It's illusion, you just don't understand what is going on in "Both".
Don't use it here.

Can you share your ebmp file and the frame numbers where you think that Deblend or Both looks better for you?

[color]

Originally Posted by VoodooFX

How fade out can be at the beginning? Of course it's at the end.


Yes, maybe Deblend can look better at some few random frames/scenes.


It's illusion, you just don't understand what is going on in "Both".
Don't use it here.

Can you share your ebmp file and the frame numbers where you think that Deblend or Both looks better for you?

Yes, frame 4011. top "inpaint" bottom "both"

EDIT: I might have used another setting and not same on both like turbo...

[VoodooFX]

Originally Posted by color

Yes, frame 4011

Same frame, Inpaint vs Deblend, I don't see how Deblend is worse than "Both":



You didn't shared your ebmp file.

[VoodooFX]

Originally Posted by color

i go through frame by frame and use whats best. (Exported to png).

You are even more hardcore than me, InpaintDelogo has zillion possible combinations of the parameters to make some specific frame look better.

Look, Inpaint [adjusted] vs Deblend:

[kedautinh12]

I think you need share scripts to help him faster

[color]

Originally Posted by VoodooFX

You are even more hardcore than me, InpaintDelogo has zillion possible combinations of the parameters to make some specific frame look better.

Look, Inpaint [adjusted] vs Deblend:

yes, but i did try a few. You know what i mean.

I think as kedautinh12, you should share a script. ☺️ Its a bit hard not knowing a lot of english and understanding everything as well.

[VoodooFX]

Where is your ebmp file?

InpaintDelogo(mask="C:\1.bmp", Loc="1388,944,-280,-24", Mode="Inpaint", Sharpness=60, preBlur=2.1, postBlur=12.6, Radius=16, oPP=-3, Optimize=0)

Core inpainting parameters: https://github.com/Purfview/InpaintD...logo.avsi#L876

Originally Posted by color

I was thinking is it possible to create a image with alpha and only dark/black color and somehow use it in a transparent to darken the logo so its not visible?

Possible: https://github.com/Purfview/InpaintD...logo.avsi#L912

[color]

Originally Posted by VoodooFX

Where is your ebmp file?

Lets try again, I did attach file here, but it seems like it didn't want to.

https://sprend.com/download?C=b11d8c...a8d28fc926b9b1