How to fix DTS HD-Master to DTS conversion ?

moutezz · 10th January 2019, 19:23

Hi everybody, I hope you doing well

I just extracted a 4.2 go DTS HD Master sound from a movie and I tried to convert that sound to DTS with EAC3toGui and with eac3to but the two softwares gave me an offset sound (-2.5 seconds).

The movie has a duration of 2h24m19s, but after convertion I found that the sound has 2h22m34s, same result with both EAC3to.

What I have to do to fix this & to obtain the same duration as result ?

Thank you.

SeeMoreDigital · 10th January 2019, 19:38

Are you attempting to extract the DTS core from the DTS-HD MA stream?

moutezz · 11th January 2019, 19:25

That's what I wanted to do, the problem is : the DTS Core obtained does not have the same duration.

tebasuna51 · 11th January 2019, 23:24

Then the DTS-MA is corrupt.

Is not possible different duration for DTS-MA and the core.

Please show how do you obtain the core with eac3to (forget the obsolete EAC3toGui)

moutezz · 17th January 2019, 19:35

Ok,

With eac3to I proceed like that-------- Source---Add source file-----eac3t audio-----Input file(s) or Folder (choose my file)-----Save As Type (DTS or AC3)-----File Name (without forgetting the DTS bitrate or AC3 bitrate, choose the Hz (for me 48000 Hz)
After that I go to Downmixing & choose "Downmix 7-8 Channels to 6 Channels.
Misc with "Extract the Core of DTS HD or 7.1 Track"

Run Command Line.
I almost forgot Paths for ( Eac3to-MKVMerge-TsMuxer-NeroAACEnc )

About EAC3to Conversion Utility ------Source File-------Destination File (without forgetting the extension at the end)--------Conversion Options 1------------DTS just below Check Extract DTS Core----------Downmix options--------Downmix to 6 ch-------Convert

I wait until the end of the conversion, if there is a problem just tell me.

Thank you.

tebasuna51 · 18th January 2019, 01:23

Quote:

Originally Posted by moutezz

With eac3to I proceed like that-------- Source---Add source file-----eac3t audio-----Input file(s) or Folder (choose my file)-----Save As Type (DTS or AC3)-----File Name (without forgetting the DTS bitrate or AC3 bitrate, choose the Hz (for me 48000 Hz)
After that I go to Downmixing & choose "Downmix 7-8 Channels to 6 Channels.
Misc with "Extract the Core of DTS HD or 7.1 Track"

Run Command Line.
I almost forgot Paths for ( Eac3to-MKVMerge-TsMuxer-NeroAACEnc )

Seems yr_eac3to_more_gui
I don't know how use that GUI to extract the core from a DTS-HD
I can't help you with that old GUI.

Quote:

About EAC3to Conversion Utility ------Source File-------Destination File (without forgetting the extension at the end)--------Conversion Options 1------------DTS just below Check Extract DTS Core----------Downmix options--------Downmix to 6 ch-------Convert

Seems EAC3toGUI

Work fine for me extracting the core from a dts-hd.
The core is already 5.1, you don't need the Downmix part.

SeeMoreDigital · 18th January 2019, 12:46

It might be possible to use good 'ol fashioned TSmuxerGUI to extract the 'core' from media files that contain lossless HD audio...

moutezz · 5th February 2019, 15:35

Hi again and sorry for the the delay,

I only want a solution, and it does not matter which software to use.

moutezz · 5th February 2019, 15:37

Quote:

Originally Posted by tebasuna51

Seems yr_eac3to_more_gui
I can't help you with that old GUI.

So help me with other software.

tebasuna51 · 5th February 2019, 22:11

Whit EAC3toGUI all work fine for me.

The core have the same duration than the full DTS-HD.

moutezz · 6th February 2019, 15:36

I will, I will try another attempt.

10th January 2019, 19:23	#1 \| Link
moutezz Registered User Join Date: Jan 2015 Location: Somewhere... you guess !!! Posts: 17	How to fix DTS HD-Master to DTS conversion ? Hi everybody, I hope you doing well I just extracted a 4.2 go DTS HD Master sound from a movie and I tried to convert that sound to DTS with EAC3toGui and with eac3to but the two softwares gave me an offset sound (-2.5 seconds). The movie has a duration of 2h24m19s, but after convertion I found that the sound has 2h22m34s, same result with both EAC3to. What I have to do to fix this & to obtain the same duration as result ? Thank you.

10th January 2019, 19:38	#2 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,402	Are you attempting to extract the DTS core from the DTS-HD MA stream? __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

18th January 2019, 12:46	#7 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,402	It might be possible to use good 'ol fashioned TSmuxerGUI to extract the 'core' from media files that contain lossless HD audio... __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11th January 2019, 19:25	#3 \| Link
moutezz Registered User Join Date: Jan 2015 Location: Somewhere... you guess !!! Posts: 17	That's what I wanted to do, the problem is : the DTS Core obtained does not have the same duration.

11th January 2019, 23:24	#4 \| Link
tebasuna51 Moderator Join Date: Feb 2005 Location: Spain Posts: 7,368	Then the DTS-MA is corrupt. Is not possible different duration for DTS-MA and the core. Please show how do you obtain the core with eac3to (forget the obsolete EAC3toGui)

17th January 2019, 19:35	#5 \| Link
moutezz Registered User Join Date: Jan 2015 Location: Somewhere... you guess !!! Posts: 17	Ok, With eac3to I proceed like that-------- Source---Add source file-----eac3t audio-----Input file(s) or Folder (choose my file)-----Save As Type (DTS or AC3)-----File Name (without forgetting the DTS bitrate or AC3 bitrate, choose the Hz (for me 48000 Hz) After that I go to Downmixing & choose "Downmix 7-8 Channels to 6 Channels. Misc with "Extract the Core of DTS HD or 7.1 Track" Run Command Line. I almost forgot Paths for ( Eac3to-MKVMerge-TsMuxer-NeroAACEnc ) About EAC3to Conversion Utility ------Source File-------Destination File (without forgetting the extension at the end)--------Conversion Options 1------------DTS just below Check Extract DTS Core----------Downmix options--------Downmix to 6 ch-------Convert I wait until the end of the conversion, if there is a problem just tell me. Thank you.

5th February 2019, 15:35	#8 \| Link
moutezz Registered User Join Date: Jan 2015 Location: Somewhere... you guess !!! Posts: 17	Hi again and sorry for the the delay, I only want a solution, and it does not matter which software to use.

5th February 2019, 22:11	#10 \| Link
tebasuna51 Moderator Join Date: Feb 2005 Location: Spain Posts: 7,368	Whit EAC3toGUI all work fine for me. The core have the same duration than the full DTS-HD.

6th February 2019, 15:36	#11 \| Link
moutezz Registered User Join Date: Jan 2015 Location: Somewhere... you guess !!! Posts: 17	I will, I will try another attempt.