madVR - high quality video renderer (GPU assisted) - Page 3072

VBB · 23rd April 2021, 02:44

@ttnuagmada - Hey, nice to see you here. You should check our OLED thread, since you're the first one with a C1. We'd love to hear some feedback

Asmodian · 23rd April 2021, 04:47

Quote:

Originally Posted by ttnuagmada

I have it set to load forced subtitles only in every single location I can find.

It sounds like everything is working as intended, at least if you are watching MKV's. A subtitle track marked as "default" in a mkv counts as forced subtitles.

Perhaps it would be good practice to not set any subtitle tracks as default when muxing matroska files.

Megalith · 1st May 2021, 07:31

Is http://madshi.net/madVRhdrMeasure131.zip the latest version? I updated to it but am still getting the annoying message about having to update my build.

zveroboy · 1st May 2021, 15:24

Quote:

Originally Posted by Megalith

http://madshi.net/madVRhdrMeasure131.zip

404 Not Found

JaylumX · 1st May 2021, 16:01

Quote:

Originally Posted by zveroboy

404 Not Found

I do not know what has happened to v131 in the link but if you change it to v130, the link will work.

SamuriHL · 1st May 2021, 16:59

Um, 131 doesn't exist. 130 is the latest beta build. And it will expire at the end of May.

Perenista · 2nd May 2021, 05:32

Not sure if you have been following, if not take a look at this: I explained in these two links a bug probably from madVR, or D3D11 related. I thought this was MPC-BE's fault.

https://forum.doom9.org/showthread.p...12#post1940912

https://forum.doom9.org/showthread.p...93#post1941893

I was told to disable D3D11, which I did, first for h.264, then for MPEG-2, and now for good.

And so far the problems I reported have not returned. In fact they returned only when I tried today for the first time a DVDRip, which uses a different codec: MPEG-2. They haven't been seen ever since D3D11 was enabled and playing h.264 videos.

Even so, I keep using madVR. And was using when the bug occured in MPC-BE.

huhn · 2nd May 2021, 10:31

it's not a bug madVR simple can't deint with d3d11 it was never implemented.

Megalith · 3rd May 2021, 08:46

My bad; madVRhdrMeasure130 is indeed the latest version. But it's already expired.

SamuriHL · 3rd May 2021, 12:12

No it hasn't.

Sent from my SM-G998U1 using Tapatalk

interpolation · 3rd May 2021, 15:09

I've been reading about resizable BAR.
https://www.guru3d.com/articles-page...chmarks,1.html
Does this have any effect on madvr performance now or in the future? I figure I would ask before flashing my motherboard and GPU BIOS to try and get my system compatible.

huhn · 3rd May 2021, 17:43

there is no harm in updating this feature (if you know what you are doing) but madVR currently does not support it. if it makes sense to support it is not know until someone tested it.

if you have a zen 2/3 CPU updating the bios is generally not a bad idea just be aware of the risk.

Gser · 3rd May 2021, 19:21

Quote:

Originally Posted by huhn

it's not a bug madVR simple can't deint with d3d11 it was never implemented.

I don't understand. Deinterlacing works fine for me in d3d11.

huhn · 3rd May 2021, 19:25

with d3d11 native >decode< as a source madVR can't deint at all.
d3d11 output has nothing todo with that.

Asmodian · 3rd May 2021, 21:58

Quote:

Originally Posted by interpolation

I've been reading about resizable BAR.
https://www.guru3d.com/articles-page...chmarks,1.html
Does this have any effect on madvr performance now or in the future? I figure I would ask before flashing my motherboard and GPU BIOS to try and get my system compatible.

No, it does not. At least, not that I can measure.

It don't think it is relevant for madVR. How often does madVR need to read or write from chunks of memory larger than 256MB? How much performance increase would madVR get from being able to combine two transfers into one?

Megalith · 4th May 2021, 05:00

Quote:

Originally Posted by SamuriHL

No it hasn't.

Sent from my SM-G998U1 using Tapatalk

So why do I keep getting a message about needing to update madVR after installing version 130? Or do I have to do more than just overwrite the previous build?

VBB · 4th May 2021, 05:05

The message is misleading, as there is no newer version at this time. Those who follow madshi's posts on AVS know that he's planning to implement a registration feature into future (beta) releases. We expect him to upload build 131 very soon, because 130 will expire at the end of May.

SamuriHL · 4th May 2021, 14:11

You're seeing a WARNING that the build WILL expire. You will know when it's expired as it will cease to work at all at that time. That will happen at the end of May. In theory, madshi will release a new beta build before that happens.

lazostat · 4th May 2021, 14:40

I open a HDR 2k movie and the brightness go high automatically. It resets when i make if full screen. Is this happening cause of madVR or wmpc? Cause when i open with bsplayer, nothing happens.

Siso · 4th May 2021, 18:52

I'm wondering - do I need the new beta builds if I play only x264 content? Is 92.17 ok, or I should use beta 113 for example?

23rd April 2021, 02:44	#61421 \| Link
VBB Registered User Join Date: May 2016 Location: Long Beach, CA, USA Posts: 620	@ttnuagmada - Hey, nice to see you here. You should check our OLED thread, since you're the first one with a C1. We'd love to hear some feedback __________________ Henry \| LG OLED65C7P \| Denon AVR-X3500H \| ELAC Uni-Fi x7 \| ELAC Debut 2.0 SUB3030 x2 \| NVIDIA SHIELD TV Pro 2019 \| Plex

1st May 2021, 16:59	#61426 \| Link
SamuriHL Registered User Join Date: May 2004 Posts: 5,351	Um, 131 doesn't exist. 130 is the latest beta build. And it will expire at the end of May. __________________ HTPC: Windows 11, AMD 5900X, RTX 3080, Pioneer Elite VSX-LX303, LG G2 77" OLED

3rd May 2021, 12:12	#61430 \| Link
SamuriHL Registered User Join Date: May 2004 Posts: 5,351	No it hasn't. Sent from my SM-G998U1 using Tapatalk __________________ HTPC: Windows 11, AMD 5900X, RTX 3080, Pioneer Elite VSX-LX303, LG G2 77" OLED

4th May 2021, 05:05	#61437 \| Link
VBB Registered User Join Date: May 2016 Location: Long Beach, CA, USA Posts: 620	The message is misleading, as there is no newer version at this time. Those who follow madshi's posts on AVS know that he's planning to implement a registration feature into future (beta) releases. We expect him to upload build 131 very soon, because 130 will expire at the end of May. __________________ Henry \| LG OLED65C7P \| Denon AVR-X3500H \| ELAC Uni-Fi x7 \| ELAC Debut 2.0 SUB3030 x2 \| NVIDIA SHIELD TV Pro 2019 \| Plex

4th May 2021, 14:11	#61438 \| Link
SamuriHL Registered User Join Date: May 2004 Posts: 5,351	You're seeing a WARNING that the build WILL expire. You will know when it's expired as it will cease to work at all at that time. That will happen at the end of May. In theory, madshi will release a new beta build before that happens. __________________ HTPC: Windows 11, AMD 5900X, RTX 3080, Pioneer Elite VSX-LX303, LG G2 77" OLED

1st May 2021, 07:31	#61423 \| Link
Megalith Registered User Join Date: Mar 2011 Posts: 132	Is http://madshi.net/madVRhdrMeasure131.zip the latest version? I updated to it but am still getting the annoying message about having to update my build.

2nd May 2021, 05:32	#61427 \| Link
Perenista Registered User Join Date: Oct 2013 Posts: 207	Not sure if you have been following, if not take a look at this: I explained in these two links a bug probably from madVR, or D3D11 related. I thought this was MPC-BE's fault. https://forum.doom9.org/showthread.p...12#post1940912 https://forum.doom9.org/showthread.p...93#post1941893 I was told to disable D3D11, which I did, first for h.264, then for MPEG-2, and now for good. And so far the problems I reported have not returned. In fact they returned only when I tried today for the first time a DVDRip, which uses a different codec: MPEG-2. They haven't been seen ever since D3D11 was enabled and playing h.264 videos. Even so, I keep using madVR. And was using when the bug occured in MPC-BE.

2nd May 2021, 10:31	#61428 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,921	it's not a bug madVR simple can't deint with d3d11 it was never implemented.

3rd May 2021, 08:46	#61429 \| Link
Megalith Registered User Join Date: Mar 2011 Posts: 132	My bad; madVRhdrMeasure130 is indeed the latest version. But it's already expired.

3rd May 2021, 15:09	#61431 \| Link
interpolation Registered User Join Date: Sep 2018 Posts: 5	I've been reading about resizable BAR. https://www.guru3d.com/articles-page...chmarks,1.html Does this have any effect on madvr performance now or in the future? I figure I would ask before flashing my motherboard and GPU BIOS to try and get my system compatible.

3rd May 2021, 17:43	#61432 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,921	there is no harm in updating this feature (if you know what you are doing) but madVR currently does not support it. if it makes sense to support it is not know until someone tested it. if you have a zen 2/3 CPU updating the bios is generally not a bad idea just be aware of the risk.

3rd May 2021, 19:25	#61434 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,921	with d3d11 native >decode< as a source madVR can't deint at all. d3d11 output has nothing todo with that.

4th May 2021, 14:40	#61439 \| Link
lazostat Registered User Join Date: Jan 2016 Posts: 21	I open a HDR 2k movie and the brightness go high automatically. It resets when i make if full screen. Is this happening cause of madVR or wmpc? Cause when i open with bsplayer, nothing happens.

4th May 2021, 18:52	#61440 \| Link
Siso Soul Seeker Join Date: Sep 2013 Posts: 714	I'm wondering - do I need the new beta builds if I play only x264 content? Is 92.17 ok, or I should use beta 113 for example? Last edited by Siso; 4th May 2021 at 19:52.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode