BD Rebuilder Beta - Bug Reports Only - Page 1085

Sharc · 22nd October 2014, 23:47

Quote:

Originally Posted by jdobbs

I just looked at it, and with the way I'm transferring that menu background directly from original to new there is no reason that I can think of that I really need insertSEI asserted (although it's generally a good practice), so I've removed it.

So it's fixed for the next release.

Great, thank you

Lathe · 23rd October 2014, 05:10

Quote:

Originally Posted by jdobbs

If you run it now and it doesn't ask you again -- then everything is good. BD-RB looks at the Directshow Preferred settings to see if they were properly set by the LAVFilters installation. If they aren't it tries to set them itself. It needs to have administrative privileges to do that.

It's the same way it worked with FFDSHOW in the past.

Very good then. Now, when I run it there are no prompts, so I guess everything is fine. Thanks!

brunchto · 23rd October 2014, 14:22

Hi,

when using batch backup, i end up with an error at the end of the first rebuild:

after clicking on "ok", BDRB is closed.
same behavior with other rips.

Code:

[09:17:17] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[09:17:17] PROCESSING BATCH FILE [1]
----------------------
[10/23/14] BD Rebuilder v0.49.05 (beta)
[09:17:18] Source:  MANHATTAN_3D_ES_00799
  - Input BD size: 40,94 GB
  - Approximate total content: [01:54:50.675]
  - Target BD size: 48,83 GB
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY mode enabled
  - Quality: Good (Very Fast), ABR
  - MVC 3D Output Mode enabled
  - Decoding/Frame serving: FRIMDecode
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[09:17:19] PHASE ONE, Encoding
 - [09:17:19] Processing: VID_00800 (1 of 1)
 - [09:17:19] Extracting A/V streams [VID_00800]
 - [10:00:04] Reencoding video [VID_00800]
 - [10:00:04] Keeping original video (no reencode)
 - [10:00:04] Processing audio tracks
   - Track 4354 (fra): Keeping original audio
[10:00:04]PHASE ONE complete
[10:00:04]PHASE TWO - Rebuild Started
 - [10:00:04] Rebuilding BD-3D file Structure
[10:23:19] - Encode and Rebuild complete
[10:23:20] JOB: MANHATTAN_3D_ES finished.

jdobbs · 23rd October 2014, 14:35

Quote:

Originally Posted by Lathe

Very good then. Now, when I run it there are no prompts, so I guess everything is fine. Thanks!

If you're using LAVF, the only time it will matter is when some circumstance forces Directshow instead (generally IVTC and certain types of resizing).

jdobbs · 23rd October 2014, 14:37

Quote:

Originally Posted by brunchto

Hi,

when using batch backup, i end up with an error at the end of the first rebuild:

after clicking on "ok", BDRB is closed.
same behavior with other rips.

Code:

[09:17:17] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[09:17:17] PROCESSING BATCH FILE [1]
----------------------
[10/23/14] BD Rebuilder v0.49.05 (beta)
[09:17:18] Source:  MANHATTAN_3D_ES_00799
  - Input BD size: 40,94 GB
  - Approximate total content: [01:54:50.675]
  - Target BD size: 48,83 GB
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY mode enabled
  - Quality: Good (Very Fast), ABR
  - MVC 3D Output Mode enabled
  - Decoding/Frame serving: FRIMDecode
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[09:17:19] PHASE ONE, Encoding
 - [09:17:19] Processing: VID_00800 (1 of 1)
 - [09:17:19] Extracting A/V streams [VID_00800]
 - [10:00:04] Reencoding video [VID_00800]
 - [10:00:04] Keeping original video (no reencode)
 - [10:00:04] Processing audio tracks
   - Track 4354 (fra): Keeping original audio
[10:00:04]PHASE ONE complete
[10:00:04]PHASE TWO - Rebuild Started
 - [10:00:04] Rebuilding BD-3D file Structure
[10:23:19] - Encode and Rebuild complete
[10:23:20] JOB: MANHATTAN_3D_ES finished.

Can you post your settings (the contents of BDREBUILDER.INI)? I've been doing a lot of batch jobs this week -- and I'm not seeing this.

brunchto · 23rd October 2014, 17:46

here are the files

Lathe · 23rd October 2014, 20:37

Quote:

Originally Posted by jdobbs

If you're using LAVF, the only time it will matter is when some circumstance forces Directshow instead (generally IVTC and certain types of resizing).

Yeah, I remember your explaining that to me earlier. I don't really do that kind of stuff very often...

Toilet-Duck · 27th October 2014, 15:52

BDRB-49.05 → error error ... CreateAVS(),00000 ... system error right...!?! wrong !?!!!

Because...

BDRB-47.07 → Encode and/or BATch encode from A to B to ZZZzzz Succesfull

End LOG.... -_-

jdobbs · 27th October 2014, 16:52

Again you fail to provide any useful information that might mean something. No title of the source. No log. No INSPECT report. No settings. Either post the information needed to attempt to find the error, or stop posting useless comments.

You have a history of incendiary postings. I will not tolerate it again. If you start posting nonsense and arguments again you will receive an immediate strike and your argumentative posts will be deleted. Be warned.

brunchto · 27th October 2014, 18:33

Hi,

some news. when rebuilding only one br (not in batch mode), i've got an error on the first try. if i press a second time on the "backup" button, it works fine.

Code:

[10/27/14] BD Rebuilder v0.49.05 (beta)
[18:21:28] Source:  LES_IMMORTELS_3D_00001
  - Input BD size: 25,40 GB
  - Approximate total content: [01:50:47.724]
  - Target BD size: 48,83 GB
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY mode enabled
  - Quality: Good (Very Fast), ABR
  - MVC 3D Output Mode enabled
  - Decoding/Frame serving: FRIMDecode
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[18:21:28] PHASE ONE, Encoding
 - [18:21:28] Processing: VID_00002 (1 of 1)
 - [18:21:28] Extracting A/V streams [VID_00002]
 - [18:21:28] ExtractAudioSubs() 00055  1601
[18:21:29] - Failed to retrieve audio, aborted
----------------------
[10/27/14] BD Rebuilder v0.49.05 (beta)
[18:21:34] Source:  LES_IMMORTELS_3D_00001
  - Input BD size: 25,40 GB
  - Approximate total content: [01:50:47.724]
  - Target BD size: 48,83 GB
  - Windows Version: 6.2 [9200]
  - MOVIE-ONLY mode enabled
  - Quality: Good (Very Fast), ABR
  - MVC 3D Output Mode enabled
  - Decoding/Frame serving: FRIMDecode
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[18:21:35] PHASE ONE, Encoding
 - [18:21:35] Processing: VID_00002 (1 of 1)
 - [18:21:35] Extracting A/V streams [VID_00002]
...

jdobbs · 27th October 2014, 19:00

@brunchto

That error is the same as your previous post, "File already open". I've looked through the code, but I can't find any reason why I'd get that error. I'll keep looking.

Just wondering, why doesn't the time in the message match that of the log?

Toilet-Duck · 27th October 2014, 19:41

Quote:

Originally Posted by jdobbs

Again you fail to provide any useful information that might mean something.

Here you are

omegaman7 · 27th October 2014, 19:43

What is it with people and attaching files? It isn't necessary! LOL

RobertM · 27th October 2014, 20:12

Omega, some people just don't explore the features of the message posting interface.

Toilet, instead of 'attaching' your information, you can just paste in your text into the reply. I'd suggest using the 'code block' method, where you tap the '#' button (above the text entry area) and you can then past your text in between the 'code' tags. For instance, I'll put the next sentence in a 'code block'.

Code:

The next sentence.

Using this method you can paste in the text so that people can see it immediately, without waiting for the attachment to be approved. You get help, and meaningful feedback, more quickly that way.

jdobbs · 27th October 2014, 21:06

It was a useless attachment anyway (see below). He posted a RAR that contained nothing more than the contents of his previous post and renamed it "BDREBUILDER.INI". Failed to follow moderator instructions -- strike issued.

Code:

BDRB-49.05 ? error error ... CreateAVS(),00000 ... system error right...!?! wrong !?!!!

Because...

BDRB-47.07 ? Encode and/or BATch encode from A to B to ZZZzzz Succesfull and video/audio in sync !!

End LOG.... -_-

Some people just don't get it... and unfortunately never will. The purpose of the thread is to report issues so they can get fixed -- not toss out nonsense and somehow expect correction through telepathy.

brunchto · 27th October 2014, 21:45

Quote:

Originally Posted by jdobbs

@brunchto

That error is the same as your previous post, "File already open". I've looked through the code, but I can't find any reason why I'd get that error. I'll keep looking.

Just wondering, why doesn't the time in the message match that of the log?

Sorry i made the capture this afternoon and the copy of the log later

jdobbs · 27th October 2014, 21:51

Quote:

Originally Posted by brunchto

Sorry i made the capture this afternoon and the copy of the log later

I tried a couple of 3D encodes using your settings this afternoon, thinking I may be able to repeat it. But no luck. Anything you can point out that may be unusual about those sources would be appreciated.

RowanM · 27th October 2014, 22:08

Quote:

Originally Posted by jdobbs

@brunchto

That error is the same as your previous post, "File already open". I've looked through the code, but I can't find any reason why I'd get that error. I'll keep looking.

Just wondering, why doesn't the time in the message match that of the log?

I have seen this when a virus scan program was running. It sees a new file and wants to scan it thus locking out all others from accessing the file.

Could this be happening?

jdobbs · 27th October 2014, 22:19

It's possible I guess. I've been looking to see if I am failing to close a file somewhere, and I get the error when another open is attempted -- but I've found nothing so far.

AmigaFuture · 28th October 2014, 05:24

Hello. BD-RB made the MKV fine, it seemed. I played it through my HDTV...and as it plays I see a video glitch where it seems the parts are joined and the audio becomes out of sync. I then burned it to a BD-25 RW for my LG 590 to play. Same thing happens. BD-RB Imported...all shows going well. So, I think.."Make a BD from Imported." Well, as you'll see it's attempting to rerender the video even with FORCE_NOENCODE=1. I also changed the output to BD-50 without that option. BD-RB is detecting a challenge because everything shows the resolution is correct, including BD-RB. When played via MPC Home Cinema it plays fine...which I expected.
I have processed Toy Story 3, and some others and they're playing correctly via HDTV.

For this, DTS, and English for everything is kept, even multiple streams(tracks). I usually rerender DTS to AC-3, but..

The Import rerendering is what I notice most.

I'm still testing. The logs don't indicate anything..and I'm checking the Work directory, as I'm able, for clues. This is the extended version. Playlist 838. Thanks.

Code:

[10/27/14] BD Rebuilder v0.49.04 (beta)
[00:18:03] Source:  NOW_YOU_SEE_ME_00838
  - Input BD size: 26.03 GB
  - Approximate total content: [02:04:48.146]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV, Intact Video, Intact Audio
  - Decoding/Frame serving: DGDecNV [4-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[00:18:04] PHASE ONE, Encoding
 - [00:18:04] Processing: VID_00863 (1 of 42)
 - [00:18:04] Extracting A/V streams [VID_00863]
 - [00:22:34] Reencoding video [VID_00863]
 - [00:22:34] Keeping original video (no reencode)
 - [00:22:34] Processing audio tracks
   - Track 4352 (eng): Keeping original audio

 [Redundancy removed]

 - [00:30:09] Processing: VID_00835 (41 of 42)
 - [00:30:09] Extracting A/V streams [VID_00835]
 - [00:30:18] Reencoding video [VID_00835]
 - [00:30:18] Keeping original video (no reencode)
 - [00:30:18] Processing: VID_00817 (42 of 42)
 - [00:30:18] Extracting A/V streams [VID_00817]
 - [00:30:41] Reencoding video [VID_00817]
 - [00:30:41] Keeping original video (no reencode)
[00:30:41]PHASE ONE complete
[00:30:41]PHASE TWO - Rebuild Started
 - [00:30:41] Building ALTERNATE OUTPUT Structure
[00:40:16] - Encode and Rebuild complete
[00:40:16] JOB: NOW_YOU_SEE_ME finished.
----------------------
[12:21:22] Importing MKV: NOW_YOU_SEE_ME_01
  - Collecting audio/video streams from source...
  - Building pseudo-BD source structure...
[12:26:52] Video import completed successfully.
----------------------
[10/27/14] BD Rebuilder v0.49.04 (beta)
[12:30:25] Source:  NOW_YOU_SEE_ME_01_00000
  - Input BD size: 21.02 GB
  - Approximate total content: [02:04:48.147]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY mode enabled
  - Quality: Highest (Very Slow), Two Pass
  - Decoding/Frame serving: DGDecNV [4-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[12:30:31] PHASE ONE, Encoding
 - [12:30:31] Processing: VID_00000 (1 of 1)
 - [12:30:31] Extracting A/V streams [VID_00000]
 - [12:34:24] Reencoding video [VID_00000]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 179,536 frames
   - Bitrate: 23,660 Kbs
 - [12:34:24] Reencoding: VID_00000, Pass 1 of 2
[12:57:33]PHASE ONE aborted by user request

27th October 2014, 16:52	#21689 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	Again you fail to provide any useful information that might mean something. No title of the source. No log. No INSPECT report. No settings. Either post the information needed to attempt to find the error, or stop posting useless comments. You have a history of incendiary postings. I will not tolerate it again. If you start posting nonsense and arguments again you will receive an immediate strike and your argumentative posts will be deleted. Be warned. __________________ Help with development of new apps: Donations. Website: www.jdobbs.net Last edited by jdobbs; 27th October 2014 at 16:54.

27th October 2014, 19:00	#21691 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	@brunchto That error is the same as your previous post, "File already open". I've looked through the code, but I can't find any reason why I'd get that error. I'll keep looking. Just wondering, why doesn't the time in the message match that of the log? __________________ Help with development of new apps: Donations. Website: www.jdobbs.net Last edited by jdobbs; 27th October 2014 at 19:07.

27th October 2014, 19:43	#21693 \| Link
omegaman7 Registered User Join Date: Jan 2010 Location: USA, Oregon Posts: 791	What is it with people and attaching files? It isn't necessary! LOL __________________ Only one rooster, need be in the hen house...

27th October 2014, 20:12	#21694 \| Link
RobertM Registered User Join Date: Apr 2011 Posts: 429	Omega, some people just don't explore the features of the message posting interface. Toilet, instead of 'attaching' your information, you can just paste in your text into the reply. I'd suggest using the 'code block' method, where you tap the '#' button (above the text entry area) and you can then past your text in between the 'code' tags. For instance, I'll put the next sentence in a 'code block'. Code: The next sentence. Using this method you can paste in the text so that people can see it immediately, without waiting for the attachment to be approved. You get help, and meaningful feedback, more quickly that way. Last edited by RobertM; 27th October 2014 at 21:56.

27th October 2014, 21:06	#21695 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	It was a useless attachment anyway (see below). He posted a RAR that contained nothing more than the contents of his previous post and renamed it "BDREBUILDER.INI". Failed to follow moderator instructions -- strike issued. Code: BDRB-49.05 ? error error ... CreateAVS(),00000 ... system error right...!?! wrong !?!!! Because... BDRB-47.07 ? Encode and/or BATch encode from A to B to ZZZzzz Succesfull and video/audio in sync !! End LOG.... -_- Some people just don't get it... and unfortunately never will. The purpose of the thread is to report issues so they can get fixed -- not toss out nonsense and somehow expect correction through telepathy. __________________ Help with development of new apps: Donations. Website: www.jdobbs.net Last edited by jdobbs; 27th October 2014 at 21:17.

27th October 2014, 15:52	#21688 \| Link
Toilet-Duck Registered User Join Date: May 2014 Posts: 8	BDRB-49.05 → error error ... CreateAVS(),00000 ... system error right...!?! wrong !?!!! Because... BDRB-47.07 → Encode and/or BATch encode from A to B to ZZZzzz Succesfull End LOG.... -_-

27th October 2014, 22:19	#21699 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	It's possible I guess. I've been looking to see if I am failing to close a file somewhere, and I get the error when another open is attempted -- but I've found nothing so far. __________________ Help with development of new apps: Donations. Website: www.jdobbs.net