tsMuxer Open Source - Page 28

Bandits · 6th March 2020, 22:26

Quote:

Originally Posted by wackopath

Hello everyone!

First i would like to say thank you very much all you guys for reviving and improving this tool! You've done and excellent work!

I've been following this thread since the revival of tsmuxer, but i've been around doom9 since just before DivX SBC.
This is absolutely my first post ever here at doom9, so sorry if this is not relevant, but i hope i can help to contribute with some feedback!

So this is what i have done so far.
Various titles with ATMOS and Dolby Vision (2-layers) back-ups have been successfully remuxed as "blu-ray folder" with no problems.
They play directly through my Oppo UDP-203 with external drive connected to USB and the TV shows the Dolby Vision logo.

I've done various backups from normal Blu-ray (1080p) to remuxed blu-ray folder and mkv. Almost all of them works fine, except a few titles
from mkv to remuxed as "blu-ray folder" with tsmuxer and dvdfab.

one example problem:
Title; I, Robot (3D to 2D) mkv file plays fine on Oppo but if i remux it as blu-ray folder with tsmuxer or DVDFab i get pixelation when playback, but
if i start the m2ts file directly from it's blu-ray folder it plays just fine, except without chapters, or named subtitles.
I tried to re-encode it with DVDFab and the problems disappear but i would prefer to have audio/video untouched.
Is there anyone having the same problems?

This is my equipment:
Oppo UDP-203
Sony Bravia KD-75ZD9
Yamaha RX-A2080

/ W

I find if I end up with pixilation it has to do with:

Insert SEI and VUI data if absent

This setting can affect some discs and has to be set to:

Do not change SEI and VUI data

Try it on a disc that gave you issues.

SeeMoreDigital · 7th March 2020, 11:17

Hi all...

Using build version '2020-03-07 git-c5b3eab' I have just generated some '2-layer Dolby Vision' re-muxes into the .ts container and into the .m2ts container, and I can confirm that my OPPO plays them in HDR10 only. And MediaInfo does not report any Dolby Vision data.

Cheers

wackopath · 7th March 2020, 13:24

Quote:

Originally Posted by Bandits

I find if I end up with pixilation it has to do with:

Insert SEI and VUI data if absent

This setting can affect some discs and has to be set to:

Do not change SEI and VUI data

Try it on a disc that gave you issues.

thank Bandits for your reply!
I have tried this since i've had that problem sometimes and it works, but in this case it doesn't... any other suggestions?

/ W

Hellboy. · 7th March 2020, 20:36

First thanks.

When i remux a 4k bluray that not contain DV to bluray folder the subtitles are okay. But when i remux a 4k bluray that contain DV, no matter is you select(check) the DV track or not, the subtitles are out of sync. Begin okay but litter a littler go out go sync. Please fix.

I read here DV single layer and DV double layer, what is the difference?

SeeMoreDigital · 7th March 2020, 20:49

Quote:

Originally Posted by Hellboy.

First thanks.

When i remux a 4k bluray that not contain DV to bluray folder the subtitles are okay. But when i remux a 4k bluray that contain DV, no matter is you select(check) the DV track or not, the subtitles are out of sync. Begin okay but litter a littler go out go sync. Please fix.

Which version of TSmuxer are you using?

How are you playing these re-muxes?

Hellboy. · 7th March 2020, 21:47

w64-nightly-2020-02-29--01-11-32, w64-nightly-2020-03-01--01-10-41, w64-nightly-2020-03-07--01-13-12

I use PowerDVD 19 and VLC

a5180007 · 8th March 2020, 18:47

Quote:

Originally Posted by imhh11

this is a long shot but could the dual layer TS issues be caused by what yusesope is explaining here: https://www.makemkv.com/forum/viewto...rt=1365#p85447

'' The part that scans the NAL units relating to the enhancement layer is not yet present in the tsMuxeR code.
(take a look HERE, only the part related to RPU metadata (NAL_DV) is taken into consideration).''

This should be fixed in this build (needs github login) including added descriptor for EAC3 and calculation of DV level.

I've tried to keep HDMV descriptors as much as possible so as to keep PGS, AC3/EAC3 and AC3/TrueHD working.

Please test single DV, double DV, EAC3 etc. on Bluray player and on UHD TV, thanks.

cogira · 8th March 2020, 19:54

Quote:

Originally Posted by a5180007

This should be fixed in this build (needs github login) including added descriptor for EAC3 and calculation of DV level.

I've tried to keep HDMV descriptors as much as possible so as to keep PGS, AC3/EAC3 and AC3/TrueHD working.

Please test single DV, double DV, EAC3 etc. on Bluray player and on UHD TV, thanks.

I tried this build and I get only black and white picture.
And also the X700 bug is still present.
Thank you for your efforts.

baker99uk · 8th March 2020, 20:09

Quote:

Originally Posted by a5180007

This should be fixed in this build (needs github login) including added descriptor for EAC3 and calculation of DV level.

I've tried to keep HDMV descriptors as much as possible so as to keep PGS, AC3/EAC3 and AC3/TrueHD working.

Please test single DV, double DV, EAC3 etc. on Bluray player and on UHD TV, thanks.

Hi I need to do more tests myself but here is a message from another user -

Quote:

Post by powdeau » Sun Mar 08, 2020 6:08 pm

I have tried a new build by a5180007 (https://forum.doom9.org/showthread.php? ... ost1903300), but the DL DV is still only triggered on X700 and not on the LG C7.
Also the reboot bug is still present.
I have noticed that unlike in the previous builds, the second layer says only EL instead of EL+RPU.

Could you please someone inform him about that since I cannot post on that forum yet? Thank you!

a5180007 · 8th March 2020, 21:01

Quote:

Originally Posted by cogira

I tried this build and I get only black and white picture.
And also the X700 bug is still present.
Thank you for your efforts.

@cogira :
Is B&W picture on player, TV or both ?
For single or double layer ?
Is EAC3 working on player, TV or both ?

Edit: ok, I think I made a stupid mistake in swapping EL and RPU...
Please try build 5a3cd98 (github login necessary).

imhh11 · 8th March 2020, 21:06

Quote:

Originally Posted by a5180007

This should be fixed in this build (needs github login) including added descriptor for EAC3 and calculation of DV level.

I've tried to keep HDMV descriptors as much as possible so as to keep PGS, AC3/EAC3 and AC3/TrueHD working.

Please test single DV, double DV, EAC3 etc. on Bluray player and on UHD TV, thanks.

like the others, DL DV triggered with washed out colors + the bug.
no go on the C8.

Perhaps because RPU is missing.

cogira · 8th March 2020, 21:18

Quote:

Originally Posted by a5180007

@cogira :
Is B&W picture on player, TV or both ?
For single or double layer ?
Is EAC3 working on player, TV or both ?

B&W both x700 player and C8 TV
Single layer
Eac3 working on both player and TV

imhh11 · 8th March 2020, 21:26

Quote:

Originally Posted by a5180007

@cogira :

Edit: ok, I think I made a stupid mistake in swapping EL and RPU...
Please try build 5a3cd98 (github login necessary).

Didnt try on the x700 yet, but now it says BL +RPU instead of EL+RPU

Code:

Video #1
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : SMPTE ST 2086, HDR10 compatible
Codec ID                                 : 36
Duration                                 : 59 s 976 ms
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 2)
Bit depth                                : 10 bits
Color range                              : Limited
Color primaries                          : BT.2020
Transfer characteristics                 : PQ
Matrix coefficients                      : BT.2020 non-constant
Mastering display color primaries        : Display P3
Mastering display luminance              : min: 0.0050 cd/m2, max: 4000 cd/m2
Maximum Content Light Level              : 1016 cd/m2
Maximum Frame-Average Light Level        : 342 cd/m2

Video #2
ID                                       : 4117 (0x1015)
Menu ID                                  : 1 (0x1)
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : Dolby Vision, Version 1.0, dvhe.07.06, BL+RPU / SMPTE ST 2086, HDR10 compatible
Codec ID                                 : 36
Duration                                 : 1 min 0 s
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 2)
Bit depth                                : 10 bits
Color range                              : Limited
Color primaries                          : BT.2020
Transfer characteristics                 : PQ
Matrix coefficients                      : BT.2020 non-constant
Mastering display color primaries        : Display P3
Mastering display luminance              : min: 0.0050 cd/m2, max: 4000 cd/m2

a5180007 · 8th March 2020, 21:51

@imhh11 thanks, I must be tired

Sorry for having to post each minor change, but no DV screen, I can't test myself...

Modified build 6c6dd72.

baker99uk · 8th March 2020, 22:12

Quote:

Originally Posted by a5180007

@cogira :
Is B&W picture on player, TV or both ?
For single or double layer ?
Is EAC3 working on player, TV or both ?

Edit: ok, I think I made a stupid mistake in swapping EL and RPU...
Please try build 5a3cd98 (github login necessary).

Neither dual layer DV or single layer DV files play on my C6.

The shield is acting remarkably well, Single Layer DV works, Dual layer DV falls back to HDR (which is what should happen).

My X700 has decided to freak out and lost it's network connection, once I have it fixed I'll test on that too.

imhh11 · 8th March 2020, 22:17

Quote:

Originally Posted by a5180007

@imhh11 thanks, I must be tired

Sorry for having to post each minor change, but no DV screen, I can't test myself...

Modified build 6c6dd72.

haha np

thanks but now it says RPU only .

Code:

Complete name                            : I:\test.split.1.ts
Format                                   : MPEG-TS
File size                                : 163 MiB
Duration                                 : 59 s 977 ms
Overall bit rate mode                    : Variable
Overall bit rate                         : 22.8 Mb/s
Maximum Overall bit rate                 : 35.5 Mb/s

Video #1
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : SMPTE ST 2086, HDR10 compatible
Codec ID                                 : 36
Duration                                 : 59 s 976 ms
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 2)
Bit depth                                : 10 bits
Color range                              : Limited
Color primaries                          : BT.2020
Transfer characteristics                 : PQ
Matrix coefficients                      : BT.2020 non-constant
Mastering display color primaries        : Display P3
Mastering display luminance              : min: 0.0050 cd/m2, max: 4000 cd/m2
Maximum Content Light Level              : 1016 cd/m2
Maximum Frame-Average Light Level        : 342 cd/m2

Video #2
ID                                       : 4117 (0x1015)
Menu ID                                  : 1 (0x1)
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : Dolby Vision, Version 1.0, dvhe.07.06, RPU / SMPTE ST 2086, HDR10 compatible
Codec ID                                 : 36
Duration                                 : 1 min 0 s
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 2)
Bit depth                                : 10 bits
Color range                              : Limited
Color primaries                          : BT.2020
Transfer characteristics                 : PQ
Matrix coefficients                      : BT.2020 non-constant
Mastering display color primaries        : Display P3
Mastering display luminance              : min: 0.0050 cd/m2, max: 4000 cd/m2

a5180007 · 8th March 2020, 22:51

@imhh11 My understanding is that RPU was HEVC NAL 62, and EL was NAL 63. Is there really both nal 62 and nal 63 in you double layer hevc ? Can you please pm me the link of the sample ?

baker99uk · 8th March 2020, 22:55

Further testing on the X700 the single layer DV doesn't play, the dual layer only plays in HDR not DV. After playing the dual layer mux it didn't lock up my player though which is nice.

Be aware my X700 completely reset itself after having to keep switching it off at the mains so it may not be acting correctly anyway (it did play an old mux in DV though)

Edit: Mine also now says this

Menu ID : 1 (0x1)
Format : HEVC
Format/Info : High Efficiency Video Coding
Format profile : Main 10@L5.1@High
HDR format : Dolby Vision, Version 1.0, dvhe.07.06, BL+RPU / SMPTE ST 2086, HDR10 compatible

SeeMoreDigital · 8th March 2020, 22:55

Quote:

Originally Posted by a5180007

@imhh11 My understanding is that RPU was HEVC NAL 62, and EL was NAL 63. Is there really both nal 62 and nal 63 in you double layer hevc ? Can you please pm me the link of the sample ?

Perhaps these terms relate to the two available types of Dolby Vision, ie: MEL (10-bit minimal enhancement layer) or FEL (12-bit full enhancement layer)...

imhh11 · 8th March 2020, 23:08

Quote:

Originally Posted by a5180007

Is there really both nal 62 and nal 63 in you double layer hevc ? Can you please pm me the link of the sample ?

with the mp4muxer dual layer, yes. always EL+RPU

original m2ts:
https://drive.google.com/file/d/1-eX...ew?usp=sharing

dual layer EL+RPU MP4 made from that m2ts:
https://drive.google.com/file/d/1VNQ...ew?usp=sharing

7th March 2020, 11:17	#542 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,227	Hi all... Using build version '2020-03-07 git-c5b3eab' I have just generated some '2-layer Dolby Vision' re-muxes into the .ts container and into the .m2ts container, and I can confirm that my OPPO plays them in HDR10 only. And MediaInfo does not report any Dolby Vision data. Cheers __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

8th March 2020, 22:55	#558 \| Link
baker99uk Registered User Join Date: Jan 2010 Posts: 34	Further testing on the X700 the single layer DV doesn't play, the dual layer only plays in HDR not DV. After playing the dual layer mux it didn't lock up my player though which is nice. Be aware my X700 completely reset itself after having to keep switching it off at the mains so it may not be acting correctly anyway (it did play an old mux in DV though) Edit: Mine also now says this Menu ID : 1 (0x1) Format : HEVC Format/Info : High Efficiency Video Coding Format profile : Main 10@L5.1@High HDR format : Dolby Vision, Version 1.0, dvhe.07.06, BL+RPU / SMPTE ST 2086, HDR10 compatible Last edited by baker99uk; 8th March 2020 at 23:09. Reason: add bl + RPU

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

7th March 2020, 20:36	#544 \| Link
Hellboy. Registered User Join Date: Mar 2020 Posts: 39	First thanks. When i remux a 4k bluray that not contain DV to bluray folder the subtitles are okay. But when i remux a 4k bluray that contain DV, no matter is you select(check) the DV track or not, the subtitles are out of sync. Begin okay but litter a littler go out go sync. Please fix. I read here DV single layer and DV double layer, what is the difference?

7th March 2020, 21:47	#546 \| Link
Hellboy. Registered User Join Date: Mar 2020 Posts: 39	w64-nightly-2020-02-29--01-11-32, w64-nightly-2020-03-01--01-10-41, w64-nightly-2020-03-07--01-13-12 I use PowerDVD 19 and VLC

8th March 2020, 21:51	#554 \| Link
a5180007 Registered User Join Date: Jun 2014 Location: Marrakech, Morocco Posts: 253	@imhh11 thanks, I must be tired Sorry for having to post each minor change, but no DV screen, I can't test myself... Modified build 6c6dd72.

8th March 2020, 22:51	#557 \| Link
a5180007 Registered User Join Date: Jun 2014 Location: Marrakech, Morocco Posts: 253	@imhh11 My understanding is that RPU was HEVC NAL 62, and EL was NAL 63. Is there really both nal 62 and nal 63 in you double layer hevc ? Can you please pm me the link of the sample ?