Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Video Encoding > MPEG-4 Encoder GUIs

Reply
 
Thread Tools Search this Thread Display Modes
Old 23rd March 2016, 19:58   #14321  |  Link
Ronski
Registered User
 
Join Date: Oct 2010
Posts: 61
Yes it is odd, just trying it the other way round with the X99 as the client and running more than one on it doesn't seem to make much difference. I'll have to test again with the older PC as the client and see what happens. Could it of just been that the FPS happened to ramp up when I tried it as the content of the video changed, thus purely coincidence?
Ronski is offline   Reply With Quote
Old 26th March 2016, 01:47   #14322  |  Link
defalopii
Registered User
 
Join Date: Feb 2011
Posts: 70
Hello, RipBot developer, how much You can add distributed server at maximum?
Log time ago ive seen ure using 4 DE, then 8DE, and now 10DE. Is that possible to make it unlimited DE server?
I imagine that i can add more and more DE server, this will speedup encoding, especially for the next codec HEVC
defalopii is offline   Reply With Quote
Old 26th March 2016, 10:17   #14323  |  Link
burt123
Registered User
 
burt123's Avatar
 
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
Quote:
Originally Posted by defalopii View Post
Hello, RipBot developer, how much You can add distributed server at maximum?
Log time ago ive seen ure using 4 DE, then 8DE, and now 10DE. Is that possible to make it unlimited DE server?
I imagine that i can add more and more DE server, this will speedup encoding, especially for the next codec HEVC
Hear, hear....................
burt123 is offline   Reply With Quote
Old 29th March 2016, 16:39   #14324  |  Link
gabbett1
Registered User
 
Join Date: Sep 2015
Posts: 67
I just recently used Ripbot to convert Insurgent and I'm having an issue. The file I created was a .mp4. When I try and play the movie it takes about 30 seconds for it to begin play, and when it does I only get sound, no video. If I simply rename the file to a .mkv it will play just fine. Rename back to .mp4 and same issue. Takes a while to play and no video. What could be the problem? I could use some help please.
gabbett1 is offline   Reply With Quote
Old 29th March 2016, 17:49   #14325  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,886
Are you using MPC-HC player?
Atak_Snajpera is offline   Reply With Quote
Old 30th March 2016, 05:45   #14326  |  Link
omegaeel
Registered User
 
Join Date: Jun 2012
Posts: 8
Socket Error

I have been getting Socket Errors on a 2nd PC I use in DE in Ripbot. The log in EncodingServer first says "Socket Error 10060" and after clicking ON within EncodingClient the server logs return "Socket Error 10038". As well as an "Access violation" error.

I tried deleting and re-established the Firewall rules and disabling Windows Firewall all together to no effect.

Using v1.19.3 on both PCs.

https://www.dropbox.com/s/2fmi3do605...43.18.png?dl=0
omegaeel is offline   Reply With Quote
Old 30th March 2016, 09:50   #14327  |  Link
dv8r
cdial
 
Join Date: Jan 2016
Posts: 27
gabbett, insurgent has a lot of scrambled titles. There are a couple of long threads about it on makemkv forum. Maybe this is the issue?
dv8r is offline   Reply With Quote
Old 30th March 2016, 12:52   #14328  |  Link
gabbett1
Registered User
 
Join Date: Sep 2015
Posts: 67
Quote:
Originally Posted by Atak_Snajpera View Post
Are you using MPC-HC player?
I'm using Windows Media Player.
gabbett1 is offline   Reply With Quote
Old 30th March 2016, 12:53   #14329  |  Link
gabbett1
Registered User
 
Join Date: Sep 2015
Posts: 67
Quote:
Originally Posted by dv8r View Post
gabbett, insurgent has a lot of scrambled titles. There are a couple of long threads about it on makemkv forum. Maybe this is the issue?
I don't think so. I'm using the title that AnyDVD said was good. And like I said, it plays just find when I rename it to a .mkv
gabbett1 is offline   Reply With Quote
Old 30th March 2016, 13:14   #14330  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,886
Quote:
Originally Posted by gabbett1 View Post
I'm using Windows Media Player.
Bad idea. Use something more advanced like MPC-HC.
Atak_Snajpera is offline   Reply With Quote
Old 30th March 2016, 13:34   #14331  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,886
Quote:
Originally Posted by omegaeel View Post
I have been getting Socket Errors on a 2nd PC I use in DE in Ripbot. The log in EncodingServer first says "Socket Error 10060" and after clicking ON within EncodingClient the server logs return "Socket Error 10038". As well as an "Access violation" error.

I tried deleting and re-established the Firewall rules and disabling Windows Firewall all together to no effect.

Using v1.19.3 on both PCs.

https://www.dropbox.com/s/2fmi3do605...43.18.png?dl=0
Most likely some software on your main pc (where you have EncodingClient running) is blocking connection from EncodingServer. Connection must be established in both ways

Atak_Snajpera is offline   Reply With Quote
Old 31st March 2016, 06:53   #14332  |  Link
fatpizza
Registered User
 
Join Date: Nov 2015
Posts: 16
Are there any known issues with using OpenCL on integrated intel GPU's? I have a Core i7 6700 and with Intel 530 and whenever I enable OpenCL in the Ripbot options it comes up with this:

C:\>"C:\Program Files\Ripbot\RipBot264v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job105\job105.avs" -o - | "C:\Program Files\Ripbot\RipBot264v1.19.2\tools\x264\x264_x64.exe" --opencl --opencl-device 0 --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 197017 --sar 1:1 --level 4.1 --preset slow --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x804p 1:1 @ 10000000/417083 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 530
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

I tried installing the 2015 vc_redist mentioned a couple of pages ago but with no luck.
fatpizza is offline   Reply With Quote
Old 31st March 2016, 09:56   #14333  |  Link
Wildfire
Registered User
 
Join Date: Apr 2003
Location: the Netherlands
Posts: 156
Quote:
Originally Posted by fatpizza View Post
Are there any known issues with using OpenCL on integrated intel GPU's? I have a Core i7 6700 and with Intel 530 and whenever I enable OpenCL in the Ripbot options it comes up with this:

C:\>"C:\Program Files\Ripbot\RipBot264v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job105\job105.avs" -o - | "C:\Program Files\Ripbot\RipBot264v1.19.2\tools\x264\x264_x64.exe" --opencl --opencl-device 0 --crf 20 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 197017 --sar 1:1 --level 4.1 --preset slow --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x804p 1:1 @ 10000000/417083 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 530
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

I tried installing the 2015 vc_redist mentioned a couple of pages ago but with no luck.
The obvious question here is, of course, are you using the most recent drivers for the Intel 530 GPU?
Wildfire is offline   Reply With Quote
Old 31st March 2016, 10:31   #14334  |  Link
Taurus
Registered User
 
Taurus's Avatar
 
Join Date: Mar 2002
Location: Krautland
Posts: 903
@fatpizza:
did you verify your opencl installation with a tool like "GPU Caps Viewer" or similar?
I had a bad time some month ago finding the right drivers at Intel.
The "normal" drivers did not support opencl.
After some fiddling around and try and error, I finally got it working.
and happily living ever after...
Taurus is offline   Reply With Quote
Old 31st March 2016, 13:17   #14335  |  Link
fatpizza
Registered User
 
Join Date: Nov 2015
Posts: 16
Quote:
Originally Posted by Wildfire View Post
The obvious question here is, of course, are you using the most recent drivers for the Intel 530 GPU?
Sorry, that should have been the first thing that I mentioned. :P Yes I did download the latest drivers.

Quote:
Originally Posted by Taurus View Post
@fatpizza:
did you verify your opencl installation with a tool like "GPU Caps Viewer" or similar?
I had a bad time some month ago finding the right drivers at Intel.
The "normal" drivers did not support opencl.
After some fiddling around and try and error, I finally got it working.
and happily living ever after...
I just used the OpenCLInfo.exe and that seemed to think everything was ok. The drivers I installed was just the normal download however in the release notes it says it includes the OpenCL package. I'll try out the Caps Viewer thing now though.
fatpizza is offline   Reply With Quote
Old 31st March 2016, 13:29   #14336  |  Link
fatpizza
Registered User
 
Join Date: Nov 2015
Posts: 16
OK, I've tried the GPU Caps Viewer and I can run all the OpenCL tests on both CPU and GPU without issue.
fatpizza is offline   Reply With Quote
Old 31st March 2016, 16:40   #14337  |  Link
omegaeel
Registered User
 
Join Date: Jun 2012
Posts: 8
Socket Error (RESOLVED)

Quote:
Originally Posted by Atak_Snajpera View Post
Most likely some software on your main pc (where you have EncodingClient running) is blocking connection from EncodingServer. Connection must be established in both ways


Thanks for the advice. I had forgotten I installed VirtualBox a while back. It installed its own virtual adapter, once disabled, everything worked fine.
omegaeel is offline   Reply With Quote
Old 2nd April 2016, 15:42   #14338  |  Link
rekd0514
Registered User
 
Join Date: Mar 2016
Posts: 2
I'm having an issue where when I encode with a locked sized at 23830 to fit on a BD-R disc it no longer will fit correctly. The encoded file size is almost always a little too large to fit on the disc when the job is complete. Ripbot has only been doing this when I upgraded to the newest 1.19.3 version. I believe I was on 1.18.3 before.

Any ideas? Thank you for the help in advance!

Last edited by rekd0514; 2nd April 2016 at 15:55.
rekd0514 is offline   Reply With Quote
Old 2nd April 2016, 16:08   #14339  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,886
Just reduce target size to 23800 if you get too big file. Maybe newer x264 builds changed something in 2-pass mode.
Atak_Snajpera is offline   Reply With Quote
Old 2nd April 2016, 16:55   #14340  |  Link
rekd0514
Registered User
 
Join Date: Mar 2016
Posts: 2
Quote:
Originally Posted by Atak_Snajpera View Post
Just reduce target size to 23800 if you get too big file. Maybe newer x264 builds changed something in 2-pass mode.
Ahhh I didn't realize you could just type in the size that you wanted! I thought the locked sizes were the only options. Very cool, thank you!
rekd0514 is offline   Reply With Quote
Reply

Tags
264, 265, appletv, avchd, bluray, gui, iphone, ipod, ps3, psp, ripbot264, x264 2-pass, x264 gui, x264_64, x265, xbox360

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:04.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.