BD Rebuilder Beta - Bug Reports Only

[rusty666]

it let me input peabody in bdrebuilder. im did try iso 3d pacific rim twice to see if was anything to do with my system but still out of sync when played the output file

[Capsbackup]

Originally Posted by Ch3vr0n

that and afaik bdrb can't handle Xvid's

Actually, BD-RB does accept import of Xvid!

[Guest]

@Rusty666

To clarify rule 6 material here, I asked where you got your source material Peabody. Will you answer it?

[rusty666]

it was only the ts of peabody wat is floating about

[Guest]

Originally Posted by rusty666

it was only the ts of peabody wat is floating about

I see, thank you. Please follow our forum rules, especially rule 6.

[Imperial Zeppelin]

Originally Posted by jdobbs

I'll have to test "The Hobbit, Pt 1" -- I haven't gotten that one yet, but I probably will soon. Unfortunately with the lack of donations in the last month I'm not planning to pick up any discs that aren't for my personal use. "Frozen" falls out of that category. It's one thing to work for nothing, it's another to pay for the privilege.

I have full 3D backups working -- but there is an picture-sync issue with multipart sources that I'm working. I'm hoping to get a special test version out in the next week or so.

Turns out Frozen was just a matter of too many updates without a purge, nuked my BD Rebuilder folder and reinstalled everything including support programs.

However, did tweak me to send in a donation. I always said I'd send something in when it went from Beta, but I'm thinking that's no longer the strategy. Keep up the appreciated work!!

[colinhunt]

jdobbs, I found an earlier post where you mentioned that Quality setting is applied to FRIMencoder. Have you mapped "ENCODE_QUALITY=4" to FRIMencoder quality setting, or is "ENCODE_QUALITY=3" the highest setting that affects FRIMencoder?

[jdobbs]

Originally Posted by Imperial Zeppelin

Turns out Frozen was just a matter of too many updates without a purge, nuked my BD Rebuilder folder and reinstalled everything including support programs.

However, did tweak me to send in a donation. I always said I'd send something in when it went from Beta, but I'm thinking that's no longer the strategy. Keep up the appreciated work!!

It's been in beta for over 5 years. I am continually making large changes, which keep it in beta (e.g. I'm working on full 3D backups right now that make numerous modifications to the code and a few subroutine rewrites).

[soneca]

jdobbs, could add a hidden option to change the font size of the subtitles (.srt) in import mode?
It would be great because the subtitles are a bit large and occasionally exceed the limits of the screen.

[rusty666]

does that mean full backup with menu even on the 3d iso converted to sbs?

[jdobbs]

Originally Posted by rusty666

does that mean full backup with menu even on the 3d iso converted to sbs?

Right now it means a full backup of a standard 3D-BD format to a standard 3DBD format. But, a 3D SBS backup can already be backed up... because it is simply a 2D disc that has SBS implemented.

[raul124]

I have the latest FFDSHOW from the 1st page, what's the correct setting to make FFDSHOW work together with BD-Rebuilder? What do I need to tweak to make it right, because when I play the stream from the back up before I burn it to a BD-5 or BD-9, I hear a pitch sound coming from the play back stream. any advice would be appreciate it, thank you

[jdobbs]

Originally Posted by raul124

I have the latest FFDSHOW from the 1st page, what's the correct setting to make FFDSHOW work together with BD-Rebuilder? What do I need to tweak to make it right, because when I play the stream from the back up before I burn it to a BD-5 or BD-9, I hear a pitch sound coming from the play back stream. any advice would be appreciate it, thank you

You're probably keeping an HD audio stream that isn't supported in FFDSHOW. I'm guessing that the original does the same thing, right?

[jdobbs]

Originally Posted by Imperial Zeppelin

Frozen driving anyone else nuts. I tried multiple boots, etc....

If I try Full Backup either from a AnyDVD ISO RIP, ISOBURN RIP or right from the disc, all mediated by AnyDVD of course:
[03/22/14] BD Rebuilder v0.46.14 (beta)
[08:11:22] Source: FROZEN
- Input BD size: 40.16 GB
- Approximate total content: [02:59:12.532]
- Target BD size: 21.92 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[08:11:24] PHASE ONE, Encoding
- [08:11:24] Processing: VID_00800 (1 of 44)
- [08:11:24] Extracting A/V streams [VID_00800]
- [08:11:30] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 800 frames
- Bitrate: 16,620 Kbs
- [08:11:30] Reencoding: VID_00800, Pass 1 of 1
- [08:11:58] Video Encode complete
- [08:11:58] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [08:12:00] Multiplexing M2TS
- [08:12:05] Processing: VID_00879 (2 of 44)
- [08:12:05] Extracting A/V streams [VID_00879]
- [08:12:11] Reencoding video [VID_00879]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 1,372 frames
- Bitrate: 16,370 Kbs
- [08:12:11] Reencoding: VID_00879, Pass 1 of 1
- [08:12:48] Video Encode complete
- [08:12:48] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR preparing intermediate audio.
[08:12:49] - Failed to reencode audio, aborted

I got a couple donations, so I picked up a copy of "Frozen". I had no issues at all with a full-backup. I have to believe that you either have a bad rip, or something is wrong with your setup. Here's where it gets past the point your log stops:

[03/24/14] BD Rebuilder v0.47.01 (beta)
[15:52:02] Source:  FROZEN
  - Input BD size: 40.15 GB
  - Approximate total content: [02:59:12.532]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7601]
  - Quality: Good (Very Fast), ABR
  - Decoding/Frame serving: DGDecNV [3-way]
  - Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[15:52:04] PHASE ONE, Encoding
 - [15:52:04] Processing: VID_00800 (1 of 44)
 - [15:52:04] Extracting A/V streams [VID_00800]
 - [15:52:12] Reencoding video [VID_00800]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 800 frames
   - Bitrate: 17,468 Kbs
 - [15:52:12] Reencoding: VID_00800, Pass 1 of 1
 - [15:52:19] Video Encode complete
 - [15:52:19] Processing audio tracks
   - Track 4352 (eng): Reencoding audio to AC3...
 - [15:52:23] Multiplexing M2TS
 - [15:52:27] Processing: VID_00879 (2 of 44)
 - [15:52:27] Extracting A/V streams [VID_00879]
 - [15:52:34] Reencoding video [VID_00879]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 1,372 frames
   - Bitrate: 17,207 Kbs
 - [15:52:34] Reencoding: VID_00879, Pass 1 of 1
 - [15:52:47] Video Encode complete
 - [15:52:47] Processing audio tracks
   - Track 4352 (eng): Reencoding audio to AC3...
 - [15:52:53] Multiplexing M2TS
 - [15:52:57] Processing: VID_00880 (3 of 44)
 ...

[rusty666]

thanx ill try converting a 3d iso to 3dbr sbs with menu

[jdobbs]

Originally Posted by rusty666

thanx ill try converting a 3d iso to 3dbr sbs with menu

Why not just wait a day or two and you will be able to do the backup without needing SBS. I'm almost done with the 3D full backups. All that's left is some additional testing.

[Sharc]

Any chance that the Quick-Play reauthoring issue will be fixed with the next release as well?

[rusty666]

its only because my dads mate only has a blu ray not a 3d blu ray player. up to know tho it dont say converting to side by side in 3d mode like it does when i do movie only . is that right?

[wakko709]

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [4504], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD-RB v0.46.0.14, not current
not current? huh?

[mparade]

Originally Posted by jdobbs

Why not just wait a day or two and you will be able to do the backup without needing SBS. I'm almost done with the 3D full backups. All that's left is some additional testing.

For me this means that a tiny bit of donation should be done urgently.