Fritz Photo - Page 5

*.mp4 guy · 18th June 2010, 10:30

Actually all the talk of Deconvolution, helped me think of a name, "Reconvolution" since there isn't any reason to believe that its doing anything but making the picture look sharper by convolving it (albeit in a sneaky way). Also it works fine on stuff that isn't out of focus.

Settings for the posted examples were:
1 ReCon(str=8, rad=2, lmode=0)
2 ReCon(str=8, rad=2, lmode=1)
3 ReCon(str=8, rad=2, lmode=3)

Except from an older version, and therefore a bit worse overall. lmode 1 is now better, and lmode 2 pretty much replaces 3.

rfmmars · 18th June 2010, 17:35

I have only one tab and the screen doesn't look like on page one. Load Avisynth 2.58, and installed your program twice, what am I doing wrong? Have no problem with AVSp or AVSpMod.

Thanks

Uploaded with ImageShack.us

Archimedes · 19th June 2010, 12:35

On Windows 7 i prefere to use the Windows Classic Style, that’s why the screenshots looks different. When you start the program, you will always see only one tab. After loading at least on image, you can click "Next" and then you will see the next tab and so on.

Archimedes · 19th June 2010, 13:28

Added "ReCon" to the sharpening templates. May be someone would like to test it.

markanini · 19th June 2010, 16:56

Just played with the parameters of ReCon. Seems to work well!

rfmmars · 19th June 2010, 16:59

Quote:

Originally Posted by rfmmars

I have only one tab and the screen doesn't look like on page one. Load Avisynth 2.58, and installed your program twice, what am I doing wrong? Have no problem with AVSp or AVSpMod.

Thanks

Uploaded with ImageShack.us

Thanks, that made it work for me, vert nice.

Richard

Archimedes · 21st June 2010, 15:10

Updated ReCon.

markanini · 26th June 2010, 10:43

Archimedes, how about a difference tab in addition to before-after? I think it would be very useful for denoising.

Archimedes · 28th June 2010, 08:38

This can be realized also with a simple script. I will think about it.

Terka · 28th June 2010, 13:45

good idea!

dlnm · 28th June 2010, 16:53

Is there a script to remove some jpeg artifacts near the edges? or may be just use a deringing script such as HQDering?
Thanks.

Archimedes · 28th June 2010, 21:10

TNLMeans (maybe with Bx=By=0)?

Source (20 % JPG Quality)
TNLMeans

Terka · 29th June 2010, 08:42

look at fft3d:
http://www.aquilinestudios.org/avsfi...patiotemp.html

dlnm · 29th June 2010, 17:56

Thanks both Archimedes and Terka.
I have tried both TNLMeans and dfttest before but the results are not satisfied. It seems that fft3d did better in this case.

Reuf Toc · 29th June 2010, 18:53

Maybe you can try Deblock_QED in addition with FFT3D or TNLMeans (I didn't tested so I don't know if it works with Jpeg artifacts)

Archimedes · 27th July 2010, 11:05

Updated the plugins NNEDI2 and EEDI3. The updates for NNEDI3 and the ImageMagick libraries already updated in the last "silent" update. Thanks to tritical and Wilbert.

For anti aliasing I added the script "SantiagMod" (could be improved with an edge mask, but this requires YV12 as input).

Source (PointResize from 3264x2448 to 1024x768) >>

SantiagMod(type="EEDI3", strh=1, strv=1) >>
SantiagMod(type="EEDI3", strh=2, strv=2) >>

SantiagMod(type="NNEDI3", strh=1, strv=1) >>
SantiagMod(type="NNEDI3", strh=2, strv=2) >>

markanini · 28th July 2010, 01:14

Awesome!

Terka · 8th September 2010, 10:58

Archimedes,
regarding my request for adding mo-compensation in Fritz Photo, please see:
http://forum.doom9.org/showthread.ph...20#post1160020

Archimedes · 28th September 2010, 18:51

Program didn't start in one case. So I've changed the windows message calls for registering and unregistering fonts.

Updated the plugins "FFmpegSource2", "Mask Tools 2" , "NNEDI3" and "SmoothAdjust".

Revgen · 30th September 2010, 08:28

Any chance you can add VCMohan's Seamer Resizer? http://forum.doom9.org/showthread.php?t=135735

18th June 2010, 10:30	#81 \| Link
*.mp4 guy Registered User Join Date: Feb 2004 Location: USA Posts: 1,348	Actually all the talk of Deconvolution, helped me think of a name, "Reconvolution" since there isn't any reason to believe that its doing anything but making the picture look sharper by convolving it (albeit in a sneaky way). Also it works fine on stuff that isn't out of focus. Settings for the posted examples were: 1 ReCon(str=8, rad=2, lmode=0) 2 ReCon(str=8, rad=2, lmode=1) 3 ReCon(str=8, rad=2, lmode=3) Except from an older version, and therefore a bit worse overall. lmode 1 is now better, and lmode 2 pretty much replaces 3. Last edited by .mp4 guy; 18th June 2010 at 11:34. Reason: spelling*

18th June 2010, 17:35	#82 \| Link
rfmmars Registered User Join Date: Feb 2004 Posts: 743	Missing Tabs I have only one tab and the screen doesn't look like on page one. Load Avisynth 2.58, and installed your program twice, what am I doing wrong? Have no problem with AVSp or AVSpMod. Thanks Uploaded with ImageShack.us

19th June 2010, 12:35	#83 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	On Windows 7 i prefere to use the Windows Classic Style, that’s why the screenshots looks different. When you start the program, you will always see only one tab. After loading at least on image, you can click "Next" and then you will see the next tab and so on. Last edited by Archimedes; 19th June 2010 at 12:47.

30th September 2010, 08:28	#100 \| Link
Revgen Registered User Join Date: Sep 2004 Location: Near LA, California, USA Posts: 1,545	Any chance you can add VCMohan's Seamer Resizer? http://forum.doom9.org/showthread.php?t=135735 __________________ Pirate: Now how would you like to die? Would you like to have your head chopped off or be burned at the stake? Curly: Burned at the stake! Moe: Why? Curly: A hot steak is always better than a cold chop.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19th June 2010, 13:28	#84 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	Added "ReCon" to the sharpening templates. May be someone would like to test it.

19th June 2010, 16:56	#85 \| Link
markanini Registered User Join Date: Apr 2006 Posts: 299	Just played with the parameters of ReCon. Seems to work well!

21st June 2010, 15:10	#87 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	Updated ReCon.

26th June 2010, 10:43	#88 \| Link
markanini Registered User Join Date: Apr 2006 Posts: 299	Archimedes, how about a difference tab in addition to before-after? I think it would be very useful for denoising.

28th June 2010, 08:38	#89 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	This can be realized also with a simple script. I will think about it.

28th June 2010, 13:45	#90 \| Link
Terka Registered User Join Date: Jan 2005 Location: cz Posts: 704	good idea!

28th June 2010, 16:53	#91 \| Link
dlnm Registered User Join Date: Jun 2009 Posts: 7	Is there a script to remove some jpeg artifacts near the edges? or may be just use a deringing script such as HQDering? Thanks.

28th June 2010, 21:10	#92 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	TNLMeans (maybe with Bx=By=0)? Source (20 % JPG Quality) TNLMeans

29th June 2010, 08:42	#93 \| Link
Terka Registered User Join Date: Jan 2005 Location: cz Posts: 704	look at fft3d: http://www.aquilinestudios.org/avsfi...patiotemp.html

29th June 2010, 17:56	#94 \| Link
dlnm Registered User Join Date: Jun 2009 Posts: 7	Thanks both Archimedes and Terka. I have tried both TNLMeans and dfttest before but the results are not satisfied. It seems that fft3d did better in this case.

29th June 2010, 18:53	#95 \| Link
Reuf Toc Registered User Join Date: Feb 2007 Posts: 65	Maybe you can try Deblock_QED in addition with FFT3D or TNLMeans (I didn't tested so I don't know if it works with Jpeg artifacts)

27th July 2010, 11:05	#96 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	Updated the plugins NNEDI2 and EEDI3. The updates for NNEDI3 and the ImageMagick libraries already updated in the last "silent" update. Thanks to tritical and Wilbert. For anti aliasing I added the script "SantiagMod" (could be improved with an edge mask, but this requires YV12 as input). Source (PointResize from 3264x2448 to 1024x768) >> SantiagMod(type="EEDI3", strh=1, strv=1) >> SantiagMod(type="EEDI3", strh=2, strv=2) >> SantiagMod(type="NNEDI3", strh=1, strv=1) >> SantiagMod(type="NNEDI3", strh=2, strv=2) >>

28th July 2010, 01:14	#97 \| Link
markanini Registered User Join Date: Apr 2006 Posts: 299	Awesome!

8th September 2010, 10:58	#98 \| Link
Terka Registered User Join Date: Jan 2005 Location: cz Posts: 704	Archimedes, regarding my request for adding mo-compensation in Fritz Photo, please see: http://forum.doom9.org/showthread.ph...20#post1160020

28th September 2010, 18:51	#99 \| Link
Archimedes Registered User Join Date: Apr 2005 Posts: 213	Program didn't start in one case. So I've changed the windows message calls for registering and unregistering fonts. Updated the plugins "FFmpegSource2", "Mask Tools 2" , "NNEDI3" and "SmoothAdjust".