Registered User
Join Date: Nov 2018
Posts: 14
|
finally I was able to use John's script. my workflow is this, I scan with Reflecta Super8+ and get an avi file 1920x1080, with Fred's script I import it on premiere pro and export it always in avi codec intel IYUV removing the black bars that is 1440x1080 Is it right?, then Avisynth (W=1470 H=1080 #final size after cropping to have aspect ratio 1.0 if I leave 1440x1080 I have 1.33) and VirtualDub to save it, for a 3 minute movie about 18 minutes of rendering with VD.
this the result, place a frame https://imgur.com/9nZ1So7
this is the code
Code:
# 8mm film restoration script by videoFred.
# www.super-8.be
# info@super-8.be
# version 01.B with frame blending
# release date: june 20, 2012
#============================================================================================
# august 2010: added removerdirtMC() as suggested by John Meyer
# october 2010: auto sharpening parameters
# march 2011: new autolevels.dll by Jim Battle
# www.thebattles.net/video/autolevels.html
# june 2012: improved stabilisation
#=============================================================================================
# cleaning, degraining, resizing, stabilizing, sharpening, auto-levels and auto-white balance.
#=============================================================================================
film= "E:\.....B.avi" # source clip, you must specify the full path here
#PARAMETERS
#----------------------------------------------------------------------------------------------------------------------------
result="result1" # specify the wanted output here
trim_begin=2 trim_end=16 play_speed= 18.75 #trim frames and play speed (PAL: 16.6666 or 18.75)
final_framerate = 25 # final frame rate
frame_blend= 0.4 # set this lover for less blending
#COLOR AND LEVELS PARAMATERS
#----------------------------------------------------------------------------------------------------------------------------
saturation=1.0 #for all outputs
gamma= 1.0 # for all outputs
blue= -0 red= 0 #manual color adjustment, when returning result3 or result4. Values can be positive or negative
black_level=0 white_level=255 output_black=0 output_white=255 # manual levels, when returning result4
#AUTO LEVELS PARAMETERS
#--------------------------------------------------------------------------------------------------------------------------------
autolev_low= 6 # limit of autolevels low output
autolev_high= 235 # limit of autolevels high output
#SIZE, CROP AND BORDERS PARAMETERS
#----------------------------------------------------------------------------------------------------------------------------
CLeft=20 CTop=20 CRight=20 CBottom=20 #crop values after Depan and before final resizing
W=1470 H=1080 #final size after cropping
bord_left=0 bord_top=0 bord_right=0 bord_bot=0 #720p= borders 150
#STABILISING PARAMETERS, YOU REALY MUST USE RESULTS7 TO CHECK STABILISATION!
#----------------------------------------------------------------------------------------------------------------------------
maxstabH=20
maxstabV=20 #maximum values for the stabiliser (in pixels) 20 is a good start value
est_left=40 est_top=40 est_right=40 est_bottom=40 #crop values for special Estimate clip
trust_value= 1.0 # scene change detection, higher= more sensitive
cutoff_value= 0.5 # no need to change this, but you can play with it and see what you get
#CLEANING PARAMETERS
#--------------------------------------------------------------------------------------------------------------
dirt_strenght=20 # set this lower for clean films.
#DENOISING PARAMETERS
#----------------------------------------------------------------------------------------------------------------------------
denoising_strenght= 300 #denoising level of second denoiser: MVDegrainMulti()
denoising_frames= 3 #number of frames for averaging (forwards and backwards) 3 is a good start value
block_size= 16 #block size of MVDegrainMulti()
block_size_v= 16
block_over= 8 #block overlapping of MVDegrainMulti()
# FOUR STEP SHARPENING PARAMETERS
#--------------------------------------------------------------------------------------------------------------------------------
USM_sharp_ness= 40 USM_radi_us= 3 #this is the start value for the unsharpmask sharpening
#do not set radius less then 3
#the script will automatically add two other steps with lower radius
last_sharp= 0.1 #final sharpening step after degraining and before blending
last_blur= 0.2 #this smooths out the heavy sharpening effects
# END VARIABLES, BEGIN SCRIPT
#=================================================================================================================================
SetMemoryMax(800) #set this to 1/3 of the available memory
LoadPlugin("plugins/Deflicker.dll")
Loadplugin("plugins/Depan.dll")
LoadPlugin("plugins/DepanEstimate.dll")
Loadplugin("plugins/removegrain.dll")
LoadPlugin("plugins/removedirt.dll")
LoadPlugin("plugins/MVTools.dll")
LoadPlugin("plugins/MVTools2.dll")
Loadplugin("plugins/warpsharp.dll")
loadplugin("plugins/autolevels_06.dll")
LoadPlugin("plugins/Motion_06Dec05B.dll")
Import("plugins/03_RemoveDirtMC.avs")
source= AviSource(film).assumefps(play_speed).trim(trim_begin,0).converttoYV12()
trimming= framecount(source)-trim_end
source1= trim(source,0,trimming)
#STABILIZING/CROPPING
#..........................................................................................................................................
stab_reference= source1.crop(20,20,-20,-20).colorYUV(autogain=true).crop(est_left,est_top,-est_right,-est_bottom)
mdata=DePanEstimate(stab_reference,trust=trust_value,dxmax=maxstabH,dymax=maxstabV)
stab=DePanStabilize(source1,data=mdata,cutoff=cutoff_value,dxmax=maxstabH,dymax=maxstabV,method=0,mirror=15).deflicker()
stab2= stab.crop(CLeft,CTop,-CRight,-CBottom)
stab3=DePanStabilize(source1,data=mdata,cutoff=cutoff_value,dxmax=maxstabH,dymax=maxstabV,method=0,info=true)
WS= width(stab)
HS= height(stab)
stab4= stab3.addborders(10,10,10,10,$B1B1B1).Lanczos4Resize(WS,HS)
stab5= Lanczos4Resize(stab2,W,H).sharpen(0.5)
#UNSHARPMASK AUTO_PARAMETERS
#-------------------------------------------------------------------------------------------------------------------------------------------
USM_sharp_ness1 = USM_sharp_ness
USM_sharp_ness2 = USM_sharp_ness+(USM_sharp_ness/2)
USM_sharp_ness3 = USM_sharp_ness*2
USM_radi_us1 = USM_radi_us
USM_radi_us2 = USM_radi_us-1
USM_radi_us3 = USM_radi_us2-1
#CLEANING/PRESHARPENING/RESIZING
#...........................................................................................................................................
noise_baseclip= stab2.levels(0,gamma,255,0,255).tweak(sat=saturation)
cleaned= RemoveDirtMC(noise_baseclip,dirt_strenght).unsharpmask(USM_sharp_ness1,USM_radi_us1,0).unsharpmask(USM_sharp_ness2,USM_radi_us2,0).Lanczos4Resize(W,H)
#DEGRAINING/SHARPENING
#.................................................................................................................................................
vectors= cleaned.MVAnalyseMulti(refframes=denoising_frames, pel=2, blksize=block_size, blksizev= block_size_v, overlap=block_over, idx=1)
denoised= cleaned.MVDegrainMulti(vectors, thSAD=denoising_strenght, SadMode=1, idx=2).unsharpmask(USM_sharp_ness3,USM_radi_us3,0).sharpen(last_sharp)
#RESULT1: AUTOLEVELS,AUTOWHITE
#.................................................................................................................................................
result1= denoised.coloryuv(autowhite=true).converttoRGB24().autolevels(output_low= autolev_low, output_high= autolev_high).converttoYV12().BlendFPS(final_framerate, frame_blend).blur(last_blur).addborders(bord_left, bord_top, bord_right, bord_bot)
#RESULT2: MANUAL LEVELS, AUTOWHITE
#.................................................................................................................................................
result2= denoised.levels(black_level,1.0,white_level,0,255).coloryuv(autowhite=true).BlendFPS(final_framerate, frame_blend).blur(last_blur).addborders(bord_left, bord_top, bord_right, bord_bot)
#RESULT3: AUTOLEVELS, MANUAL COLOR CORRECTIONS
#.................................................................................................................................................
result3= denoised.coloryuv(off_U=blue,off_V=red).converttoRGB24().autolevels(output_low= autolev_low, output_high= autolev_high).converttoYV12().BlendFPS(final_framerate, frame_blend).blur(last_blur).addborders(bord_left, bord_top, bord_right, bord_bot)
#RESULT4: MANUAL LEVELS, MANUAL COLOR CORRECTIONS
#..................................................................................................................................................
result4= denoised.coloryuv(off_U=blue,off_V=red).levels(black_level,1.0,white_level,0,255).BlendFPS(final_framerate, frame_blend).blur(last_blur).addborders(bord_left, bord_top, bord_right, bord_bot)
#RESULT5: SPECIAL SERVICE CLIP FOR RESULT S5
#..................................................................................................................................................
result5= overlay(source1,greyscale(stab_reference),x=est_left,y=est_top).addborders(2,2,2,2,$FFFFFF).Lanczos4Resize(WS,HS)
#PARAMETERS FOR THE COMPARISONS
#..................................................................................................................................................
W2= W+bord_left+bord_right
H2= H+bord_top+bord_bot
source4=Lanczos4Resize(source1,W2,H2).changeFPS(final_framerate)
#COMPARISONS: ORIGINAL VS RESULTS
#......................................................................................................................................................................
resultS1= stackhorizontal(subtitle(source4,"original",size=28,align=2),subtitle(result1,"result1: autolevels, autowhite",size=28,align=2))
resultS2= stackhorizontal(subtitle(source4,"original",size=28,align=2),subtitle(result2,"result2: autowhite, manual levels correction",size=28,align=2))
resultS3= stackhorizontal(subtitle(source4,"original",size=28,align=2),subtitle(result3,"result3: autolevels, manual color correction",size=28,align=2))
resultS4= stackhorizontal(subtitle(source4,"original",size=28,align=2),subtitle(result4,"result4: manual colors and levels correction",size=28,align=2))
resultS5= stackhorizontal(subtitle(result3,"result3: auto levels, manual color correction",size=28,align=2),subtitle(result4,"result4: manual colors and levels correction",size=28,align=2))
resultS6= stackhorizontal(subtitle(result1,"result1: autolevels, autowhite",size=28,align=2),subtitle(result2,"result2: manual levels, autowhite",size=28,align=2))
#SPECIAL COMPARISON CLIP FOR TESTING THE STABILIZER
#.........................................................................................................................................................................
resultS7= stackhorizontal(subtitle(result5,"baseclip for stabiliser -only the B/W clip is used",size=32,align=2),subtitle(stab4,"test stabiliser: dx=horizontal, dy=vertical",size=32,align=5)).converttoYUY2()
Eval(result)
while if I use John's script the export time is around the hour, is it normal? or am I wrong something?
Thanks for help
Code in the nex post
Last edited by MIGLIO74; 15th November 2020 at 18:53.
Reason: wrong link
|