Nero problems after installing new major update

[ElJugador247]

I just installed the newest nero 6 ultra major edition update (6.6.0.16) and now if I burn the entire dvd, with the menus, etc. when I play it in my dvd player every dvd I burned freezes up my dvd player. Unfortunately since I had never had this problem before I burned several movies without realizing it. These same movies play perfectly on my pc, however. Also, if I burn the movie only, they still play fine on my dvd player. I also tried some DVDs that I previously burned prior to updating with the full dvd, menus, etc and they also play fine on my dvd player. Any suggestions? Thanks

[setarip_old]

if I burn the movie only, they still play fine on my dvd player.

Sounds like you may be using poor quality media. If the "movie only" occupies less than the full DVD, you may be (fortunately) avoiding burning data to the outermost extremities of the DVD, where most problems arise when using low quality media.

Post your NERO log of one of these "Full DVD" problem burns here...

[Taelon]

When does it freeze up the player? During the movie, when accessing the menu, when the disk is first inserted?

If the movie only backups play fine, I'm guessing you've made errors when reauthoring the titles.

[ElJugador247]

They freeze up prior to getting to the movie, a couple have frozen up almost immediately, a couple have played throught the previews then freeze before going to the movie. I will post a log file

[ElJugador247]

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 16b

Recorder: <GENERIC DVD RW 8XMax> Version: 160I - HA 2 TA 3 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HDS728080PLAT20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4481B D: CDRom0
GENERIC DVD RW 8XMax J: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514800kB)
Free physical memory: 202MB (207520kB)
Memory in use : 59
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.8.2005
NeroAPI
1:40:23 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

1:40:23 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

1:40:23 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

1:40:23 AM #4 Text 0 File Reader.cpp, Line 127
Reader running

1:40:23 AM #5 Text 0 File Writer.cpp, Line 122
Writer GENERIC DVD RW 8XMax running

1:40:23 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:40:23 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:40:23 AM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

1:40:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283631 (507:28.31, 4460MB)

1:40:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

1:40:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

1:40:24 AM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:40:24 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [GENERIC DVD RW 8XMax]
--------------------------------------------------------------

1:40:24 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [GENERIC DVD RW 8XMax] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676878336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283632 | lead-out | 1 | 0x41 | 0x00

1:40:24 AM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

1:40:24 AM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

1:40:24 AM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

1:40:24 AM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

1:40:24 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:40:24 AM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

1:40:24 AM #21 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

1:54:33 AM #22 Text 0 File WriterStatus.cpp, Line 116
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2283632 (22D870h), lenght 0 blocks

1:54:33 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:55:01 AM #24 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[setarip_old]

CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: Off

Turn DMA on for your burner


File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

Uninstall "InCD" and all related files (Use NERO's InCD "Clean Tool"), as this packet-writing program is known to interfere with proper burning by NERO Burning ROM...

[blutach]

When you uninstall InCD, use the CleanTool (http://www.nero.com/en/InCD_Clean_Tool.html). Nevertheless, your log shows a successful burn.

Your media is very cheap and may not be at all compatible with your players. See here (http://forum.digital-digest.com/showthread.php?s=&threadid=49635) for burning tips. Best one is to get good media - Verbatims, Taiyo Yudens, Riteks, Maxells.

Regards

[ElJugador247]

I learned alot form these posts thanks particularly to blutach for the links to detailed information. Still haven't found a fix for the new nero, but I have switched to burning with decrypter and I really do think its better anyway. Thanks for the help.