I am having a lot of trouble with 0.93b

[canoner]

DVD RB had been working perfectly for me a long time till I updated to 0.93b. I was trying to back up Aviator and Million Dollar Baby using the 0.93b this week and run into following trouble. I used both CCE 2.66 trial, CCE 2.67SP, CCE 2.70SP and none works right.

1) often time, I get the "encoding failed to creat .m2v, retrying" message
2) And I get a lot of "possible frames dropped in this segment" message
3) CCE 2.66 trial freezes from time to time. I noticed that if runs minimized, which I prefer.
4) severly oversizing and undersizing. I got 6.7GB, 2.1GB and 3.2GB on three tries with the Aviator.

I would appreciate if anyone give me a pointer.

[canoner]

This is the log of latest failure attemp with Million dollar baby:

[02:54:53] One Click encoding activated...
-----------------
[02:54:53] Phase I, PREPARATION started.
- "Steal Space from Extras" mode is enabled.
- VTS_01: 3,475,181 sectors.
-- Scanning and writing .D2V file
-- Processed 195,695 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 64.8%
- Overall Bitrate : 3,906Kbs
- Space for Video : 3,892,004KB
- Movie improvement from extra reduction = .0%
- HIGH/LOW/AVERAGE Cell Bitrates: 4,579/2,855/3,906 Kbs
[02:59:33] Phase I, PREPARATION completed in 5 minutes.
[02:59:33] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
[05:24:53] Phase II ENCODING completed in 145 minutes.
[05:24:53] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 1 VOBID: 2 CELLID: 1
[11:55:49] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 1 VOBID: 2 CELLID: 1
- Rebuilding segment 2 VOBID: 2 CELLID: 2
- Rebuilding segment 3 VOBID: 2 CELLID: 3
- Rebuilding segment 4 VOBID: 2 CELLID: 4
- Rebuilding segment 5 VOBID: 2 CELLID: 5
- Rebuilding segment 6 VOBID: 2 CELLID: 6
- Rebuilding segment 7 VOBID: 2 CELLID: 7
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 8 VOBID: 2 CELLID: 8
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 9 VOBID: 2 CELLID: 9
- Rebuilding segment 10 VOBID: 2 CELLID: 10
- Rebuilding segment 11 VOBID: 2 CELLID: 11
- Rebuilding segment 12 VOBID: 2 CELLID: 12
- Rebuilding segment 13 VOBID: 2 CELLID: 13
- Rebuilding segment 14 VOBID: 2 CELLID: 14
- Rebuilding segment 15 VOBID: 2 CELLID: 15
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 16 VOBID: 2 CELLID: 16
- Rebuilding segment 17 VOBID: 2 CELLID: 17
- Rebuilding segment 18 VOBID: 2 CELLID: 18
- Rebuilding segment 19 VOBID: 2 CELLID: 19
- Rebuilding segment 20 VOBID: 2 CELLID: 20
- Rebuilding segment 21 VOBID: 2 CELLID: 21
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 22 VOBID: 3 CELLID: 1
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 23 VOBID: 3 CELLID: 2
- Rebuilding segment 24 VOBID: 3 CELLID: 3
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 25 VOBID: 3 CELLID: 4
- Rebuilding segment 26 VOBID: 3 CELLID: 5
- Rebuilding segment 27 VOBID: 3 CELLID: 6
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 28 VOBID: 3 CELLID: 7
- Rebuilding segment 29 VOBID: 3 CELLID: 8
- Rebuilding segment 30 VOBID: 3 CELLID: 9
- Rebuilding segment 31 VOBID: 3 CELLID: 10
- Rebuilding segment 32 VOBID: 3 CELLID: 11
- Rebuilding segment 33 VOBID: 3 CELLID: 12
- Rebuilding segment 34 VOBID: 3 CELLID: 13
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 35 VOBID: 3 CELLID: 14
- Rebuilding segment 36 VOBID: 3 CELLID: 15
- Rebuilding segment 37 VOBID: 3 CELLID: 16
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 38 VOBID: 4 CELLID: 1
- Updating NAVPACKS for VOBID_04
- Rebuilding segment 39 VOBID: 5 CELLID: 1
- Updating NAVPACKS for VOBID_05
- Rebuilding segment 40 VOBID: 6 CELLID: 1
- Updating NAVPACKS for VOBID_06
- Rebuilding segment 41 VOBID: 7 CELLID: 1
- Updating NAVPACKS for VOBID_07
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
Correcting VTS Sectors...
[12:16:52] Phase III, REBUILD completed in 21 minutes.

Done.

[jptheripper]

did you preprocessing? there are no extras on this disk.

[canoner]

did you preprocessing? there are no extras on this disk.

No. I ripped the files on hard drive and started DVD-RB. There had been disks that had no extras and it worked perfectly well.

[jptheripper]

OPV or VBR, also can you try re-ripping the files to you hdd, maybe you had read errors

[canoner]

the ripping was fine. I tested with DVD Shrink and it worded fine. But I prefer DVD-RB for the better quality.

[pg55555]

CANONER

Your posting was so general that it is difficult to pinpoint the problem.
I would suggest to focus in one DVD, one encoder, one problem.

So first, the log you post about Million dolar Baby, what encoder do you used?
If it was 2.70, please redo it with other, as there has been reports of this dropped frames with this encoder. You should not have that kind of problems with 2.66 or 2.67

If it was with 2.66 or 2.67, I would suggest to desinstall RB and all its auxiliary soft (Avisynth, CCE, DGMPEG,..) and re-install. Please use Rockas installer for it. And install just one encoder (2.66 or 2.7).
Re-rip your DVD and run RB with just the standard settings
Report the result.