Oversizing Problem

[esso]

Im trying to encode invader zim vol 2 Disc 4. my output keeps comming out oversized 4.43GB. at first i just installed v.1.00 RC1 over 93.2 and i thought maybe that was the issue, but i did a clean install of RC1 and it still is oversizing. The only options im using are:
iDCT: 32 bit Simple MMX (XVID)
HC Options: Best
DC Precision: 10 Bit Precision
Steal space from extras: 10%
and one click mode.

i've done it with all the options set to default and had a file around 4.41GB i think it was.

heres my status log:

[08:05:18] One Click encoding activated...
-----------------
[08:05:19] Phase I, PREPARATION started.
- HC encoder selected
- "Steal Space from Extras" mode is enabled.
- VTS_01: 32,852 sectors.
-- Scanning and writing .D2V file
-- Processed 2,597 frames.
-- Building .AVS and .ECL files
- VTS_02: 3,312,554 sectors.
-- ANGLE and/or INTERLEAVING is present.
-- Scanning and writing .D2V file
- Processed 1,533.7MB ILVU section...
- Processed 1,526.3MB ILVU section...
- Processed 757.2MB ILVU section...
- Processed 1,512.8MB ILVU section...
-- Processed 358,358 frames.
-- Building .AVS and .ECL files
- VTS_03: 172,814 sectors.
-- Scanning and writing .D2V file
-- Processed 17,865 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 62.3%
- Overall Bitrate : 1,984Kbs
- Space for Video : 3,826,714KB
- Movie improvement from extra reduction = .7%
- HIGH/LOW/TYPICAL Bitrates: 3,868/546/1,984 Kbs
[08:18:52] Phase I, PREPARATION completed in 13 minutes.
[08:18:52] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Creating M2V for VTS_02 segment 6
- Creating M2V for VTS_02 segment 7
- Creating M2V for VTS_02 segment 8
- Creating M2V for VTS_02 segment 9
- Creating M2V for VTS_02 segment 10
- Creating M2V for VTS_02 segment 11
- Creating M2V for VTS_02 segment 12
- Creating M2V for VTS_02 segment 13
- Creating M2V for VTS_02 segment 14
- Creating M2V for VTS_02 segment 15
- Creating M2V for VTS_02 segment 16
- Creating M2V for VTS_02 segment 17
- Creating M2V for VTS_02 segment 18
- Creating M2V for VTS_02 segment 19
- Creating M2V for VTS_02 segment 20
- Creating M2V for VTS_02 segment 21
- Creating M2V for VTS_02 segment 22
- Creating M2V for VTS_02 segment 23
- Creating M2V for VTS_02 segment 24
- Creating M2V for VTS_02 segment 25
- Creating M2V for VTS_02 segment 26
- Creating M2V for VTS_02 segment 27
- Creating M2V for VTS_02 segment 28
- Creating M2V for VTS_02 segment 29
- Creating M2V for VTS_02 segment 30
- Creating M2V for VTS_02 segment 31
- Creating M2V for VTS_02 segment 32
- Creating M2V for VTS_02 segment 33
- Creating M2V for VTS_02 segment 34
- Creating M2V for VTS_02 segment 35
- Creating M2V for VTS_02 segment 36
- Creating M2V for VTS_02 segment 37
- Creating M2V for VTS_02 segment 38
- Creating M2V for VTS_02 segment 39
- Creating M2V for VTS_02 segment 40
- Creating M2V for VTS_02 segment 41
- Creating M2V for VTS_02 segment 42
- Creating M2V for VTS_02 segment 43
- Creating M2V for VTS_02 segment 44
- Extracting STILLS for VTS_02 segment 45
- Creating M2V for VTS_02 segment 46
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_03 segment 2
- Creating M2V for VTS_03 segment 3
[17:02:21] Phase II ENCODING completed in 524 minutes.
[17:02:21] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 2 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 3 VOBID 3 CELLID 1
- Rebuilding seg 4 VOBID 3 CELLID 2
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Processed 1,533.7MB ILVU section...
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Rebuilding seg 2 VOBID 2 CELLID 2
- Rebuilding seg 3 VOBID 2 CELLID 3
- Rebuilding seg 4 VOBID 2 CELLID 4
- Rebuilding seg 5 VOBID 3 CELLID 1
- Rebuilding seg 6 VOBID 3 CELLID 2
- Rebuilding seg 7 VOBID 3 CELLID 3
- Rebuilding seg 8 VOBID 3 CELLID 4
- Updating NAVPACKS for VOBID_02
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 9 VOBID 4 CELLID 1
- Rebuilding seg 10 VOBID 4 CELLID 2
- Processed 1,526.3MB ILVU section...
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 11 VOBID 5 CELLID 1
- Rebuilding seg 12 VOBID 5 CELLID 2
- Rebuilding seg 13 VOBID 5 CELLID 3
- Rebuilding seg 14 VOBID 6 CELLID 1
- Rebuilding seg 15 VOBID 6 CELLID 2
- Rebuilding seg 16 VOBID 6 CELLID 3
- Rebuilding seg 17 VOBID 7 CELLID 1
- Rebuilding seg 18 VOBID 7 CELLID 2
- Rebuilding seg 19 VOBID 8 CELLID 1
- Rebuilding seg 20 VOBID 8 CELLID 2
- Updating NAVPACKS for VOBID_05
- Updating NAVPACKS for VOBID_06
- Updating NAVPACKS for VOBID_07
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 21 VOBID 9 CELLID 1
- Rebuilding seg 22 VOBID 9 CELLID 2
- Rebuilding seg 23 VOBID 9 CELLID 3
- Rebuilding seg 24 VOBID 9 CELLID 4
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 25 VOBID 10 CELLID 1
- Rebuilding seg 26 VOBID 10 CELLID 2
- Processed 757.2MB ILVU section...
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 27 VOBID 11 CELLID 1
- Rebuilding seg 28 VOBID 11 CELLID 2
- Rebuilding seg 29 VOBID 12 CELLID 1
- Rebuilding seg 30 VOBID 12 CELLID 2
- Updating NAVPACKS for VOBID_11
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 31 VOBID 13 CELLID 1
- Rebuilding seg 32 VOBID 13 CELLID 2
- Processed 1,512.8MB ILVU section...
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 33 VOBID 14 CELLID 1
- Rebuilding seg 34 VOBID 14 CELLID 2
- Rebuilding seg 35 VOBID 14 CELLID 3
- Rebuilding seg 36 VOBID 14 CELLID 4
- Rebuilding seg 37 VOBID 15 CELLID 1
- Rebuilding seg 38 VOBID 15 CELLID 2
- Rebuilding seg 39 VOBID 15 CELLID 3
- Rebuilding seg 40 VOBID 15 CELLID 4
- Updating NAVPACKS for VOBID_14
- Updating NAVPACKS for VOBID_15
- Rebuilding seg 41 VOBID 16 CELLID 1
- Rebuilding seg 42 VOBID 16 CELLID 2
- Updating NAVPACKS for VOBID_16
- Rebuilding seg 43 VOBID 17 CELLID 1
- Rebuilding seg 44 VOBID 17 CELLID 2
- Updating NAVPACKS for VOBID_17
- Rebuilding seg 45 VOBID 18 CELLID 1
- Updating NAVPACKS for VOBID_18
- Rebuilding seg 46 VOBID 19 CELLID 1
- Updating NAVPACKS for VOBID_19
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
Correcting VTS Sectors...
[17:36:29] Phase III, REBUILD completed in 34 minutes.

Done.
[17:36:29] PREPARE/ENCODE/REBUILD completed in 571 min.

please let me know if im doing something wrong here.
we watch the zim dvd's religiously in my house, so i would like to keep my investment safe. ^_^

[Axlemar]

Try setting the DC Precision lower or on auto. I think the bitrate is too low for 10 (if I understand it correctly). Also, stealing space for a .7 gain will probably make the extras look really bad and have very little or no visual difference on the main episode vts so if you want more space just remove the extras. Also, the different idct settings can affect the accuracy of the size from what I understand.

Are the .m2v files in the d2vavs folder playable, or is there an error?

[esso]

the .m2v's are playable. i tried it with all the settings default and it was still oversized. i'll go through and do a clean install and use default settings to see what it gets me.

[Axlemar]

I just did an ILVU that came out oversized also, so it might have to do with rebuilder.

[esso]

i just did it again, and it came out oversized again. i completely uninstalled everything and re-installed rebuilder, i also used only the default setttings. i will try it tonite when i get home from work and skool, with cce basic.

[pg55555]

Try lowering the TargetSize setting in the Rebuilder.ini file
If it is complete clean installation, it should not been there, so RB uses its default of 2236000.
But you can try setting it to a lower value. (look at the sticky "RB setting" thread at the top of this forum, search for "Hidden settings".
Also can just try procesing your ouutput with Shrink, compressing just the titles