Major undersize... 2 times

[Xuivo]

Hi, i've tried encoding 2 movies, and both gived me undersize problem. One was 3.13 gb and the last one was 2 gb...

This only happened when i was encoding movie from Quebec... I know that they have a werid encoding in my province when they do encoding... Both movie from quebec were undersize, which was not the case with american movies...

What must I post to get an anwser? Ini file?

Thx

[jptheripper]

ini, encoder (cce, hc, etc..) logfile (was it ilvu, etc..) rb version

also, did you look at the video? and by chance was there a large lpcm audio track?

[Xuivo]

All right

I'm using CCE SP v2.67.00.27, there was no large track, only a 5.1 (which i kept) and a stereo (2 channel) Both were 293 and 252 respectively. I don't know how to check for ILVU though, but i'm sure taht my previous movie was not and pretty sure this is one is not either.

I'm using v.0.93.2 Pro. I've post the ini file.

Thx

-----------------
[20:59:57] Phase I, PREPARATION started.
- CCE SP 2.67.0.27 encoder selected.
- "Steal Space from Extras" mode is enabled.
- VTS_04: 2 698 156 sectors.
-- Scanning and writing .D2V file
-- Processed 163 727 frames.
-- Building .AVS and .ECL files
- VTS_05: 33 116 sectors.
-- Scanning and writing .D2V file
-- Processed 2 053 frames.
-- Building .AVS and .ECL files
- VTS_06: 33 116 sectors.
-- Scanning and writing .D2V file
-- Processed 2 053 frames.
-- Building .AVS and .ECL files
- VTS_07: 33 113 sectors.
-- Scanning and writing .D2V file
-- Processed 2 053 frames.
-- Building .AVS and .ECL files
- VTS_08: 33 114 sectors.
-- Scanning and writing .D2V file
-- Processed 2 053 frames.
-- Building .AVS and .ECL files
- VTS_11: 55 236 sectors.
-- Scanning and writing .D2V file
-- Processed 3 427 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 73,9%
- Overall Bitrate : 4 253Kbs
- Space for Video : 3 797 466KB
- Movie improvement from extra reduction = 1,8%
- HIGH/LOW/TYPICAL Bitrates: 4 449/3 150/4 253 Kbs
[21:06:44] Phase I, PREPARATION completed in 7 minutes.
[22:37:07] Phase II ENCODING started
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Creating M2V for VTS_04 segment 5
- Creating M2V for VTS_04 segment 6
- Creating M2V for VTS_04 segment 7
- Creating M2V for VTS_04 segment 8
- Creating M2V for VTS_04 segment 9
- Creating M2V for VTS_04 segment 10
- Creating M2V for VTS_04 segment 11
- Creating M2V for VTS_04 segment 12
- Creating M2V for VTS_04 segment 13
- Creating M2V for VTS_04 segment 14
- Creating M2V for VTS_04 segment 15
- Creating M2V for VTS_04 segment 16
- Creating M2V for VTS_04 segment 17
- Creating M2V for VTS_04 segment 18
- Creating M2V for VTS_04 segment 19
- Creating M2V for VTS_04 segment 20
- Creating M2V for VTS_04 segment 21
- Creating M2V for VTS_04 segment 22
- Creating M2V for VTS_04 segment 23
- Creating M2V for VTS_04 segment 24
- Creating M2V for VTS_04 segment 25
- Creating M2V for VTS_04 segment 26
- Creating M2V for VTS_04 segment 27
- Creating M2V for VTS_04 segment 28
- Creating M2V for VTS_04 segment 29
- Creating M2V for VTS_04 segment 30
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_07 segment 0
- Creating M2V for VTS_08 segment 0
- Creating M2V for VTS_11 segment 0
[23:46:19] Phase II ENCODING completed in 69 minutes.
[23:52:06] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Rebuilding segment 2 VOBID: 1 CELLID: 3
- Rebuilding segment 3 VOBID: 1 CELLID: 4
- Rebuilding segment 4 VOBID: 1 CELLID: 5
- Rebuilding segment 5 VOBID: 1 CELLID: 6
- Rebuilding segment 6 VOBID: 1 CELLID: 7
- Rebuilding segment 7 VOBID: 1 CELLID: 8
- Rebuilding segment 8 VOBID: 1 CELLID: 9
- Rebuilding segment 9 VOBID: 1 CELLID: 10
- Rebuilding segment 10 VOBID: 1 CELLID: 11
- Rebuilding segment 11 VOBID: 1 CELLID: 12
- Rebuilding segment 12 VOBID: 1 CELLID: 13
- Rebuilding segment 13 VOBID: 1 CELLID: 14
- Rebuilding segment 14 VOBID: 1 CELLID: 15
- Rebuilding segment 15 VOBID: 1 CELLID: 16
- Rebuilding segment 16 VOBID: 1 CELLID: 17
- Rebuilding segment 17 VOBID: 1 CELLID: 18
- Rebuilding segment 18 VOBID: 1 CELLID: 19
- Rebuilding segment 19 VOBID: 1 CELLID: 20
- Rebuilding segment 20 VOBID: 1 CELLID: 21
- Rebuilding segment 21 VOBID: 1 CELLID: 22
- Rebuilding segment 22 VOBID: 1 CELLID: 23
- Rebuilding segment 23 VOBID: 1 CELLID: 24
- Rebuilding segment 24 VOBID: 1 CELLID: 25
- Rebuilding segment 25 VOBID: 1 CELLID: 26
- Rebuilding segment 26 VOBID: 1 CELLID: 27
- Rebuilding segment 27 VOBID: 1 CELLID: 28
- Rebuilding segment 28 VOBID: 1 CELLID: 29
- Rebuilding segment 29 VOBID: 1 CELLID: 30
- Rebuilding segment 30 VOBID: 1 CELLID: 31
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Processing VTS_06
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
- Updating TMAP table...
- Processing VTS_07
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_07_0.IFO
- Updating TMAP table...
- Processing VTS_08
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_08_0.IFO
- Updating TMAP table...
- Processing VTS_11
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_11_0.IFO
- Updating TMAP table...
Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[00:10:19] Phase III, REBUILD completed in 18 minutes.

Done.

[Xuivo]

I also want to point out the very slow encoding time... Usually, it takes between 130 and 160 minutes to encode a DVD, never something under 70 minutes!

[Xuivo]

And that's my configuration file. Any body got a clue? i've tooked the original and did no modification

[Options]
Mode=1
OneClick=0
ReduceOpt=2
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=0
Skin=Rockas Original
HC_Quality=1
HC_Matrix=1
SkinVersion=5
CCE=1
ISO_Output=1
HalfD1=0000000
Convert_16_9=0000000
DisableInterlace=0000000
MovieOnly=0
DVD_Name=AIMANTS.ISO
DVD_Label=DVD-VIDEO
ISO_Delete_Option=0
Decrypter_Write=0
Completed=5
DECOMBFlag=1
[Paths]

QuEnc=C:\Program Files\DVD-RB PRO\Encoders\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB PRO\Encoders\ReJig\ReJig.exe
HC=C:\Program Files\DVD-RB PRO\Encoders\HC Encoder\HCbatch.EXE
ProCoder=C:\Program Files\DVD-RB PRO\Encoders\EclPro\EclPro.exe
DECOMB=C:\Program Files\DVD-RB PRO\Filters\Decomb521.dll
MPEG2DEC=C:\Program Files\DVD-RB PRO\DGDecode.dll
Working=C:\RB_WORK\
Output=C:\RB_FINISH\
CCENew=C:\Program Files\Cinema Craft Encoder SP v2.67.00.27\cctsp.exe
Source=C:\REMAKE\
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=3
[Audio]
Selected=101111111111
[Subpictures]
Selected=1001111111111

[jptheripper]

69 minute cce encode?

damn

opv?

[Xuivo]

No, that's what weird. It a 3 passes CCE encoding.

[jptheripper]

no way you did that that fast.. did you look at the video?

[Xuivo]

Just did, and find out something really weird. I've got the red bar issue at the bottom... I did installed properly and i double check to see if DGDecode was in the rebuilder directory and it's there...

Now, i'm very confused... I though this issue was only a problem regarding the decoder.

Suggestion? I've done 3 dvd's without problem though before. I did not check if it was red bar in the first undersized one, but in this case, it's definitely red bar

[k2002rahmani]

I actually have a suggestion for you. Remove everything you have. Install newest version Rockas style. Go to start menu, DVD-RB directory, Extras, and open the CCE and Procoder configuration. Follow everything and select CCE SP 2.67 from the wizard, Retail or Trial, whichever you have. It almost seems like you have CCE and HC both enabled in different areas. I would just do the CCE setup with Rockas conffiguration wizard.

This should work, I was getting major size problems before I did the Rockas installation. Hope it works!

[Axlemar]

If you get distorted / weird video make sure you are using avisynth 2.55 (not the beta) and the dgdecode that comes with the program.

[Xuivo]

I will try reinstalling it... I've already did that with rockas original, perhaps some file got overwrited or something...

Just want to know if some dvd from certain place may be a problem for dvd-rb?
I remember when i was doing divx of those quebec movie, and it was a pain in the a**. Is it possible that deinterlacing it with decomb may cause a problem?

[nymph]

I had a similar problem. I had CCE 2.67 and did numerous movies with no issues at all, and then decided to try CCE version 2.70.
Thats when the problems started. I ran into issues, and then reinstalled CCE 2.67. From that point on, DVD's would rebuild at only 2gb and 1/4 the time it normally took. Then when I tried to view the movie I got that red bar at the bottom. I tried everything I could think of, even going through the registry and deleting all references to CCE that I could find, but I must have missed some because the problem remained. So, I reformatted my hard drive and reisntalled eveything and the problem is gone.

2 things I learned:

1. Stay with CCE 2.67 and if it aint broke don't fix it.
2. From now on have a back-up image of my freshly installed OS with all my apps installed!

nYmph

[pg55555]

Is it possible that deinterlacing it with decomb may cause a problem?

I really do not know, but in general jdobbs discourage deinterlacing, so I would try processing those DVDs w/o it.

And YES, weird DVD authoring can cause RB problems. In general jdobbs will try to understand what is the problem and solve it. But sometimes it is difficullt for him to find what the problem is when he does not have access to that particular title.