Oversize Problem with v0.91Installer

[Prosper0]

After attemping to burn the movie "The Name of the Rose" a number of times and still get oversize problems, Im turning to the forum for help. The lowest size folder I have obtained so far is standing at 4440.1 mb in Nero and in windows - 4.33 GB (4,655,458,304 bytes. The software I used for the process was DVD decrypter to make the ISO, then I used Shrink to strip audio and compress one of the extras which was in the same VTS (according to rebuilder) as the main movie. After this I opened the files in DVD remake and modified the menu and removed some unwated stuff(trailer, adds, warnings etc). Then I finally open it up with Rebuilder (0.91 Installer)using CCE 2.67.00.27 and EclCCE 1.81. I have half-d1 and extras on and have the settings exactly like in the guides. I have already backed up some dvd's in the past with rebuilder on some earlier versions and have recently started again. I do not have any of the hidden settings on I think,
Here is the text file from the burn:

[22:43:12] One Click encoding activated...
-----------------
[22:43:12] Phase I, PREPARATION started.
- "Half-D1/Half Space for Extras" mode is enabled.
- VTS_01: 763,968 sectors.
-- Scanning and writing .D2V file
-- Processed 65,175 frames.
-- Building .AVS and .ECL files
- VTS_02: 3,043,377 sectors.
-- Scanning and writing .D2V file
-- Processed 213,287 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 57.8%
- Overall Bitrate : 2,791Kbs
- Space for Video : 3,794,370KB
- Movie improvement from extra reduction = 14.2%
- HIGH/LOW/AVERAGE Cell Bitrates: 4,146/819/2,791 Kbs
[22:57:05] Phase I, PREPARATION completed in 14 minutes.
[22:57:05] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_02 segment 2
- Creating M2V for VTS_02 segment 3
- Creating M2V for VTS_02 segment 4
- Creating M2V for VTS_02 segment 5
- Creating M2V for VTS_02 segment 6
- Creating M2V for VTS_02 segment 7
- Creating M2V for VTS_02 segment 8
- Creating M2V for VTS_02 segment 9
- Creating M2V for VTS_02 segment 10
- Creating M2V for VTS_02 segment 11
- Creating M2V for VTS_02 segment 12
- Creating M2V for VTS_02 segment 13
- Creating M2V for VTS_02 segment 14
- Creating M2V for VTS_02 segment 15
- Creating M2V for VTS_02 segment 16
- Creating M2V for VTS_02 segment 17
- Creating M2V for VTS_02 segment 18
- Creating M2V for VTS_02 segment 19
- Creating M2V for VTS_02 segment 20
- Creating M2V for VTS_02 segment 21
- Creating M2V for VTS_02 segment 22
- Creating M2V for VTS_02 segment 23
- Creating M2V for VTS_02 segment 24
- Creating M2V for VTS_02 segment 25
- Creating M2V for VTS_02 segment 26
- Creating M2V for VTS_02 segment 27
- Creating M2V for VTS_02 segment 28
- Creating M2V for VTS_02 segment 29
- Creating M2V for VTS_02 segment 30
- Creating M2V for VTS_02 segment 31
- Creating M2V for VTS_02 segment 32
- Creating M2V for VTS_02 segment 33
- Creating M2V for VTS_02 segment 34
- Creating M2V for VTS_02 segment 35
- Creating M2V for VTS_02 segment 36
[05:41:50] Phase II ENCODING completed in 404 minutes.
[05:41:50] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 1 VOBID: 2 CELLID: 1
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 2 VOBID: 3 CELLID: 1
- Rebuilding segment 3 VOBID: 3 CELLID: 2
- Rebuilding segment 4 VOBID: 3 CELLID: 3
- Rebuilding segment 5 VOBID: 3 CELLID: 4
- Rebuilding segment 6 VOBID: 3 CELLID: 5
- Rebuilding segment 7 VOBID: 3 CELLID: 6
- Rebuilding segment 8 VOBID: 3 CELLID: 7
- Rebuilding segment 9 VOBID: 3 CELLID: 8
- Rebuilding segment 10 VOBID: 3 CELLID: 9
- Rebuilding segment 11 VOBID: 3 CELLID: 10
- Rebuilding segment 12 VOBID: 3 CELLID: 11
- Rebuilding segment 13 VOBID: 3 CELLID: 12
- Rebuilding segment 14 VOBID: 3 CELLID: 13
- Rebuilding segment 15 VOBID: 3 CELLID: 14
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 16 VOBID: 4 CELLID: 1
- Rebuilding segment 17 VOBID: 4 CELLID: 2
- Rebuilding segment 18 VOBID: 4 CELLID: 3
- Rebuilding segment 19 VOBID: 4 CELLID: 4
- Rebuilding segment 20 VOBID: 4 CELLID: 5
- Rebuilding segment 21 VOBID: 4 CELLID: 6
- Rebuilding segment 22 VOBID: 4 CELLID: 7
- Rebuilding segment 23 VOBID: 4 CELLID: 8
- Rebuilding segment 24 VOBID: 4 CELLID: 9
- Rebuilding segment 25 VOBID: 4 CELLID: 10
- Rebuilding segment 26 VOBID: 4 CELLID: 11
- Rebuilding segment 27 VOBID: 4 CELLID: 12
- Rebuilding segment 28 VOBID: 4 CELLID: 13
- Rebuilding segment 29 VOBID: 4 CELLID: 14
- Rebuilding segment 30 VOBID: 4 CELLID: 15
- Rebuilding segment 31 VOBID: 4 CELLID: 16
- Rebuilding segment 32 VOBID: 4 CELLID: 17
- Rebuilding segment 33 VOBID: 4 CELLID: 18
- Rebuilding segment 34 VOBID: 4 CELLID: 19
- Rebuilding segment 35 VOBID: 4 CELLID: 20
- Updating NAVPACKS for VOBID_04
- Rebuilding segment 36 VOBID: 5 CELLID: 1
- Updating NAVPACKS for VOBID_05
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
Correcting VTS Sectors...
[06:01:19] Phase III, REBUILD completed in 20 minutes.

Done.
[06:01:19] PREPARE/ENCODE/REBUILD completed in 438 min.

And here is a copy of my Rebuilder.ini from C/programs files/ DVD-RB/
[Audio]
Selected=0000110101
[Options]
Mode=1
OneClick=1
ReduceOpt=0
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=0
Skin=Rockas Original
HC_Quality=1
HC_Matrix=1
SkinVersion=3
CCE=1
HalfD1=000
Convert_16_9=000
DisableInterlace=000
Completed=2
HalfExtras=1
[Paths]
QuEnc=C:\Program Files\DVD-RB\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB\ReJig\ReJig.exe
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
ProCoder=C:\Program Files\DVD-RB\EclPro\EclPro.exe
MPEG2DEC=C:\Program Files\DVD-RB\DGDecode.dll
Working=D:\WORKPATH\
Output=D:\NAME OF THE ROSE\
HC=C:\Program Files\DVD-RB\HC Encoder\HCbatch.EXE
CCENew=C:\Program Files\Custom Technology\CCE SP Trial Version\EclCCE.exe
Source=F:\NAMEOFTHEROSE2\VIDEO_TS\

[Subpictures]
Selected=10101010
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=3

If anyone can offer any help that would be great,
Prosper0

[Rockas]

Man I've never seen so many rules broken in a single post... congratulations http://www.thestylemachine.com/smileys/palmas.gif

[Prosper0]

Woops :( Can this be blamed on my noobiness?
Sorry for the trouble...
Prosper0

[johnruiz]

Originally posted by Prosper0
using CCE 2.67.00.27 with a CCE patcher applied CCE patcher:eek:

[Prosper0]

Woops, is CCE patcher a bad thing? Other DVD's have backed up fine on this setup using older versions of Rebuilder

[borgraf]

1) :readrule:
2) edit your post, removing anything that breaks the rules like illegal software and whatnot
3) while i'm at it, :readfaq:

[Rockas]

And another rule (this one... lets consider it as a Rebuilder rule):

Don't post any problems when working with Preprocessed sources without trying a clean one first.

[Prosper0]

Okay Ill try rebuilder without the other programs. Also could someone link me to the rules as I cant seem to find them.
Thanks and sorry for the trouble
Prosper0

[MarkP]

There is a link at the top of every page in the Forum
http://forum.doom9.org/forum-rules.htm

[Prosper0]

After reading those rules, I really cant see what rules I have supposedly broken. Like must of the other similar topics I posted the logs as normally they are requested.

[Rockas]

You broke two rules that's why I said I've never seen so many rules broken in one post (usually people - me included... - only break one lol)

1st ... doom9's rule number 6

2nd And another rule (this one... lets consider it as a Rebuilder rule):

Don't post any problems when working with Preprocessed sources without trying a clean one first.

;)