Getting a burning error w/ Shrink + Nero -- please help

[Skrill]

Hello,

I was previously able to burn backup DVDs without issue with Shrink + Nero. However, recently I have been getting an error message and I am not sure what is causing it. For background -- it seems to be for all DVDs. I cannot back Bourne Supremacy, Grudge or virtually any other. I have tried using DVD Decrypter to rip first. And I have tried VOB Blanker to take out the copy protection. Nothing seems to work.

I have following rig:

Intel P4 2.8 ghz
Abit TH7II Raid
2 x 256MB Samsung PC800
Nvidia 6800
Maxtor HDDs (60 gb x 2)
NEC ND-2500A DVD Burner (I have tried updating the firmware -- and flashing in 2510A upgrade -- no affect)

Please help

I have cut and pasted the entire log as I am not sure what is relevant:



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.18 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 5T060H6 TAH7 hpt3xx Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y060P0 YAR4 hpt3xx Port 0 ID 0 DMA: Off
OtherPeripheral : HPT RCM DEVICE hpt3xx Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-2510A IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A L: CDRom3
PIONEER DVD-ROM DVD-116 G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 221MB (227068kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.4.2005
NeroAPI
7:13:19 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

7:13:19 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

7:13:19 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

7:13:19 AM #4 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:19 AM #5 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:19 AM #6 Text 0 File Reader.cpp, Line 127
Reader running

7:13:19 AM #7 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running

7:13:19 AM #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

7:13:19 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:13:19 AM #10 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

7:13:19 AM #11 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

7:13:20 AM #12 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)

7:13:20 AM #13 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO

7:13:20 AM #14 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

7:13:20 AM #15 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:13:20 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

7:13:20 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00

7:13:20 AM #18 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

7:13:20 AM #19 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

7:13:20 AM #20 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

7:13:20 AM #21 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

7:13:20 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:13:20 AM #23 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

7:13:20 AM #24 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

7:13:20 AM #25 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

7:13:20 AM #26 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:13:20 AM #27 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:20 AM #28 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:20 AM #29 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:20 AM #30 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-2510A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

7:13:23 AM #31 Text 0 File Cdrdrv.cpp, Line 1287
07:13:23.781 - _NEC DVD_RW ND-2510A\H1 T0 : Queue again later

7:13:38 AM #32 SCSI -1106 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BAA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

7:13:38 AM #33 CDR -1106 File Writer.cpp, Line 311
Power calibration error

7:13:38 AM #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:13:38 AM #35 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:13:38 AM #36 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1

7:13:38 AM #37 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:38 AM #38 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:38 AM #39 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-2510A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

7:13:38 AM #40 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

7:13:38 AM #41 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

7:13:38 AM #42 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

7:13:42 AM #43 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4

7:13:42 AM #44 Text 0 File DVDR.cpp, Line 5937
Book Type counter: 500, Book Type selected in EEPROM, command version 4


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 10/21/2002 10:33:40 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[dragongodz]

try outputing to iso from dvdshrink and then try burning that with DvdDecrypter and see if you get an error.

[Skrill]

I tried creating an ISO earlier (used Nero still to burn) -- no help.

I may be mistaken -- but I was not aware that DVD Decrypter could burn.

[Axed]

You havent played with your firmware at all have you? Just that the parts that really stick out to me are:

7:13:38 AM #33 CDR -1106 File Writer.cpp, Line 311
Power calibration error

7:13:38 AM #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:13:38 AM #39 Text 0 File DVDR.cpp, Line 5061
Drive: _NEC DVD_RW ND-2510A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

It seemed to do that twice.

DVD Decrypter has had burning for awhile now. Just click 'Mode', then 'ISO' then select 'Write'.

[Skrill]

I did this with the factory firmware. I tried updating the firmware, then I flashed in the 2510A firmware -- but neither worked.

[Skrill]

I tried DVDDecrypter and got this:


http://images8.fotki.com/v148/photos/8/84864/661823/errormessage-vi.jpg

[darkangle73]

outch, I hate to be the one to say.... you might benifit from a old fasion clean install. write zeros to the drive, then install your operating system. :eek: