Runtime Error '6' Overflow

[SiC]

I've been reading about this program so I thought I'd give it a try but I've been running into this error. As soon as I try to load the Source path, I get this error: "Runtime Error '6' Overflow". I'm using DVD RB 0.80 with CCESP 2.67 and I've setup AviSynth 2.5 with all the *.dll files in place. I ripped the DVD to my HD using Decrypter and I have plenty of free HD space but I still get this error....

Thanx in advanced

[jdobbs]

Try using Rockas' installer...

[SiC]

I still get the same error, any other suggestions?

[jdobbs]

What version are you using?

[SiC]

I just tried Rocka's installer version 0.80, it just crashes with that error as soon as I try to load the source path. I seems like it doesn't even check that directory, as soon as I click the OK button after selecting the directory, it gives me that error.

[jdobbs]

It sure sound like something is wrong with the source path... is there anything special about it?

Are you saying the installer crashes too, or DVD-RB crashes after the install?

[SiC]

No, the installer is fine and the program runs fine until I try to load the source directory, which is d:\DVDRip\VIDEO_TS. As soon as I hit the OK button when I browse for the directory, it gives me the error and it crashes. I'm running the Japanese version of WinXP Pro SP2, maybe some issues with foreign Windows?

[Rockas]

Yep... that's the problem... Japanese (and other oriental) characters.

Please check it here:
http://dvd-rb.dvd2go.org/modules.php?name=Forums&file=viewtopic&t=100

and here:

http://dvd-rb.dvd2go.org/modules.php?name=Forums&file=viewtopic&t=57

keep it UP

[SiC]

Worked like a charm, thanx alot!

[SpazzHH]

I just received the same error(6) trying to do Sideways NTSC R1 with the new 0.83. Popped up while trying to extract still for VTS 5, segment 6. I converted text segments to slideshow with segment viewer after Prepare with 25% reduction in Extras enabled in 3 click mode. Ran the project with 0.82 without converting to Slideshow and didn't get the error. Here is log:

- Versions:
-- CCE SP Version: 2.70.2.0
-- ReJig Version: 0.3.0.0
-- QuEnc Version: 0.0.5.9
-- DECODER Version: UNKNOWN
-- AVISYNTH Version: 2.5.5.0

-----------------
[12:27:15] Phase I, PREPARATION started.
- CCE SP 2.70.2.0 encoder selected.
- "Steal Space from Extras" mode is enabled.
- VTS_04: 46,523 sectors.
-- Scanning and writing .D2V file
-- Processed 3,546 frames.
-- Building .AVS and .ECL files
- VTS_05: 259,156 sectors.
-- Scanning and writing .D2V file
-- Processed 27,011 frames.
-- Building .AVS and .ECL files
- VTS_06: 2,539,017 sectors.
-- Scanning and writing .D2V file
-- Processed 182,791 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 76.1%
- Overall Bitrate : 3,626Kbs
- Space for Video : 3,939,118KB
- Movie improvement from extra reduction = 3.1%
- HIGH/LOW/TYPICAL Bitrates: 5,588/500/3,626 Kbs
[12:30:34] Phase I, PREPARATION completed in 3 minutes.
[12:45:33] Phase II ENCODING started
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Extracting STILLS for VTS_04 segment 5
- Extracting STILLS for VTS_04 segment 6
- Extracting STILLS for VTS_04 segment 7
- Extracting STILLS for VTS_04 segment 8
- Extracting STILLS for VTS_04 segment 9
- Extracting STILLS for VTS_04 segment 10
- Extracting STILLS for VTS_04 segment 11
- Extracting STILLS for VTS_05 segment 0
- Extracting STILLS for VTS_05 segment 1
- Extracting STILLS for VTS_05 segment 2
- Extracting STILLS for VTS_05 segment 3
- Extracting STILLS for VTS_05 segment 4
- Creating M2V for VTS_05 segment 5
- Extracting STILLS for VTS_05 segment 6

Version Of DGDecode coming with release. This is the point it got to when error popped up.Here is .ini if it helps:

[Options]
SkinVersion=5
HC_Quality=3
LogFile=1
EncoderMinimized=1
RemoveDTS=1
idct7Opt=1
AudioDub=0
CCE=3
AdditionalOutput=1
LowMatrix=Low Bitrate
VLowMatrix=Very Low Bitrate
ExtraMatrix=Low Bitrate
TargetSectors=2264000
MIN_BITRATE=500
vts_min_size=12000
HalfD1=0000
Convert_16_9=0000
DisableInterlace=0000
Completed=2
ReduceOpt=1
SkipPrepare=1
QTrellis=1
[Paths]
CCENEW=C:\Program Files\CCE SP Trial Version 2.70.02\cctspt.exe
REJIG=C:\Program Files\Ripping Tools\DVD-RB\ReJig\ReJig.exe
QuEnc=C:\Program Files\Ripping Tools\DVD-RB\QuEnc\QuEnc.exe
ProCoder=C:\Program Files\Ripping Tools\DVD-RB\EclPro\EclPro.exe
MPEG2DEC=C:\Program Files\Ripping Tools\DVD-RB\dgdecode.dll
DECOMB=C:\Program Files\Ripping Tools\AviSynth 2.5\plugins\InverseTelecine\Decomb521.dll
Working=H:\TEMP\DVD-RB\
Output=G:\DVD\DVD_RB\SIDEWAYS_169\
Source=C:\DOCUMENTS AND SETTINGS\ALL USERS\DESKTOP\SIDEWAYS_169\VIDEO_TS\
[Setup]
Language11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
sLanguage00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
[CCEOptions]
VBR_bias=25
Quality_prec=24
eclPasses=4
[Audio]
Selected=111000

[jdobbs]

What happens if you run it in v0.82 and convert to SLIDESHOW?

What do you mean by "text segments"?

[jdobbs]

I'm confused. I have that disc and I just loaded it. There are 16 segments in VTS_04 (0 - 15) -- where are they? They don't show in your post???

[SpazzHH]

There are very short(less than 1000 frames) text only segments before each deleted scene giving a small background history on each. I just reran the same project without converting to slideshow with 0.83 and it passed that part already. It happens very early in project. I will try converting with 0.82 and let you know results very soon.

[SpazzHH]

Originally posted by jdobbs
I'm confused. I have that disc and I just loaded it. There are 16 segments in VTS_04 (0 - 15) -- where are they? They don't show in your post???

Sorry, was not as thorough as I should have been. I did preprocess with Vob Blanker leaving only Main Movie(Title 1-VTS_6),Trailer(Title 6-Last part of VTS_4),and Deleted Scenes(Ttitles 7-14-VTS_5).I haven't figured out yet how to get rid of warning screens, etc. using only RB.
Error occured at start of 6th segment-VTS_5. Project aborted when error occured. That was as far as that run went. I posted the error as soon as it happened, while error message was still on the screen even.

(Update) I have isolated the problem. It only occurs on a very small(19 frames) segment when converting to slideshow. It also will happen if you try and convert segment 26(23 frames) to slideshow. If you do not convert those segments, using them "as is", the project will continue with no error. Same result in 0.82 or 0.83. The problem seems to be in the small frame segment conversion, but I will certainly leave that conclusion up to you.

[jdobbs]

SpazzHH -- this isn't aimed at you, I just want to reiterate something to all.

Please, please, please... everyone -- if you preprocess, don't post any reported problems until you've tried it without preprocessing, and always, always mention the fact that you've preprocessed the file. I have spent an immeasurable amount of time chasing down rabbit holes only to find out later that the problem wasn't related to DVD-RB at all.

[jdobbs]

@SpazzHH

Thanks for the update. I'm going back to check it out on small segments.

[SpazzHH]

Did "The Terminal R1-NTSC" last night with 0.88. Once again, through Seg. Viewer, tried to convert the last segment of Main Movie VTS(end credits) to slideshow(I've only tried this once before-see above post). I got the dreaded "Runtime Error 6 - Overflow" message during Rebuild when Rebuild reached the segment that would have contained the slideshow. I am still using CCE 2.70.2 as before, and have tried doing a lot of the discs that people have reported problems with, just to see if I could make CCE choke. I have never been able to get it to act up, except here it seems. Everything else I do with it, for me, it works flawlessly, but convert end credits to slideshow, and it's choke, choke, choke. I redid this project, like the last one, without converting to slideshow, and it completed flawlessly. Can't see anything in CCE log that would be a problem on either project.

[jdobbs]

If you got a runtime error 6 during rebuild I don't think it would have anything to do with the encoder... it's DVD Rebuilder. So give me the steps exactly so I can try to repeat this.

You try to set the last segment of the movie to SLIDESHOW -- does it matter if its the last segment of the entire disc or not?

[SpazzHH]

Originally posted by jdobbs
If you got a runtime error 6 during rebuild I don't think it would have anything to do with the encoder... it's DVD Rebuilder. So give me the steps exactly so I can try to repeat this.

You try to set the last segment of the movie to SLIDESHOW -- does it matter if its the last segment of the entire disc or not?

Hasn't mattered on location on disc. The Terminal has main movie in VTS 8 of 12.Don't remember, but think Sideways ways VTS 1, anyway, only common factor for me, was converting end credits segment to slideshow. Both times(and only times) I have done that, I got the Error 6. Redo with same source, without selecting that, and the project completes perfectly.The error pops up as soon as it tries to rebuild the slideshow segment.

[jdobbs]

I'll try one and see what happens.

[jdobbs]

Found and fixed for version 0.89. Thanks for pointing it out. It was a really odd one.

[CyberCouf]

I had the error(6) over flow too, (v0.85free/avisynth2.5/CCESP2.67) DVD multiangle.

so i'll wait for 0.89 :cool:

[jdobbs]

There also is a reported "Runtime Error 6" that can happen during rebuild. I'm still trying to find that one -- but can't seem to repeat it. If anyone has a clue as to the circumstances, please let me know. I'd like to get that fix into 0.89 as well.

[CyberCouf]

For mine it was just during the "prepare" phase.

[bmiller]

I had a runtime 6 error when using movie only mode for Vera Drake.I decrypted the whole movie with dvd decrypter,ran rebuilder in movie only mode using cce 2.70 trial.It re-encoded the movie as there was only 1 vts in the list.After the movie itself was finished,indicating 100% and 2.5 hrs. later,i got a runtime error 6.Sorry i can't remember if this was the rebuild phase,or it was trying to look for a non existent vts and then pooped out.
I used Videoredo to blank out everything and loaded the resulting file in rebuilder,and it completed no problem.
I was using .88 beta.
Waiting for .89 to try again.Great program.Keep up the good work.

[jdobbs]

I just found and fixed a source of that error during rebuild that could happen when using the SLIDESHOW option. Was that set in your example?

[elizerrojas]

it is not the source path, i got run-time error'6' overflow at 66% encording. and i have no process the movie either. i use RB-prov.88/HC/mickey disney movie, entire movie mode.

[jdobbs]

??? Source path?

I just said I'd found and fixed this. It will be in v0.89.

[bmiller]

I tried .89 pro with Vera Drake again,and i get the same error 6 when it tries to process vobid 4.The entire movie itself is in the vts folder,as i can play each vob individually,but when it gets to rebuilding vobid 4 it crashes.Maybe this is a quirk in this movie.I will have to try another movie and see.
cce2.70,movie only mode.

[Carpo]

try using cce 2.6 or HC and see if you still get the error - also did you pre process or let dvd-rb blank out what you dont wont

[jdobbs]

I've been told I can repeat that error on the "The Corporation" -- I've ordered it online (couldn't find it locally), so when it gets delivered maybe I'll be able to find this...

[bmiller]

I just decrypted the whole movie with dvddecrypter and loaded it in dvdrb.I'll try it with HC.

[jdobbs]

Just the movie, or the whole disc?

[jdobbs]

Fixed in v0.89.

[L3on]

Hi , Did you FIX This Problem in v.0.89 ?

ERROR 0006: DVD-RB has found an inconsistency in source data between the PREPARE and REBUILD phases. Aborting.

I'm using DVD Rebuilder with canopus Procoder 2.0 and this Error popup When Rebuilder Trying to Rebuild a DVD , Tryed many versions of RB and still no luck . Thx

[bmiller]

I tried it with HC.Same error 6.I load the whole disc,and then selected movie only in rebuilder.When it gets to rebuilding vobid4 it hesitates and then the error.The progress window at this point is at %100.
At the point of error,rebuilder has re-encoded and rebuit and updated the navpacks for the first 3 vobs. That status window after vobid3 is at %100,which doesn't seem right
I attached a picture of the error.

[bmiller]

I tried Vera Drake with version 90.Same error,same place.

[jdobbs]

I found and fixed the "Runtime Error 6" in "The Corporation" for v0.91 -- not sure if it is related to yours.

[jdobbs]

I'll go out and see if I can find a copy of Vera Drake...

[bmiller]

I'll try another movie tonight to see if it is just that movie causing the problem.

[bmiller]

I ran The same movie only test with "sideways".It ran perfectly.
The problem is with the movie Vera Drake.

[jdobbs]

If I can find that title, I will nail down what causes it.

[bmiller]

I tried Vera Drake with version 91.Works ok.Good job.
Thanks, Brad Miller

[lark]

bmiller, are you saying that you used 0.91 in movie only mode?

regards
t :)

[bmiller]

You are correct.Up until version 91 this movie wouldn't work in movie only mode.The problem has been corrected in version 91.

[jdobbs]

Every now and then (rare as it may seem) I do something right. :cool:

[lantern]

I have gotten this error with Ice Age using ReJig. I am using the latest version of ReJig 0.5f (from DVD-RB site) and ripped using DVDFab Decrypter. There was no other preprocessing. DVD-RB was installed using the installer. I was using the one-click option and during the prepare phase I receive the error:

Run-Time error '6':
Overflow

Thanks

[jdobbs]

I'll check it out.

[jdobbs]

@lantern

What version of DVD Rebuilder are you using?
Is this an NTSC, R1 disc?
Did it happen on Disc 1 or Disc2?
Could you post your REBUILDER.INI file so I can copy your settings?

[jdobbs]

I just did both discs using DVD Fab v2.9.6.6, DVD-RB v1.05.1 and ReJig 0.5f -- and they went through without any problems. Apparently you are using different settings somewhere. I'll need your REBUILDER.INI file before I can continue.