Run-time error '75' assistance

[in_a_silent_way]

I receive a "Run-time error '75' Path/file access error" using DVD-RB 0.80 while updating NAVPACKS of the final VOBID for 'Master and Commander.'

- Updating NAVPACKS for VOBID_02
The specified source path is not valid. Reset to blank.

I have tried three other titles ('Open Range' etc) with the same results. Prior to this problem occuring I backed up approximately fifteen titles flawlessly using various versions of the software below.

currently running:
DVD Decrypter 3.5.4.0
AviSynth 2.55 build Sep 1 2004 (16:49:49)
CCE Basic 2.70.01.02
DVD-RB 0.80
DGDecode.dll
Daemon Tools 3.47

PIII 667mhz, 512MB RAM, 30GB HDD, Win 2000 Sp4
(underpowered but it did work in the past)

I am fairly confident that there is an obvious fix for this and that this post reveals me to be the ignorant fool that I am, but I have read the forum posts and tried everything that I could think of, including a complete system reinstall, but to no avail. If someone could throw me some rope on this one, I promise to use it to hang myself after I get this working again.

[Rockas]

Can you post your Rebuilder.ini file?

[in_a_silent_way]

[Audio]
Selected=
[Options]
Mode=1
OneClick=0
ReduceOpt=1
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=0
RemoveDTS=1
Skin=Simple Blue
HC_Quality=1
HC_Matrix=1
CCE=2
HalfD1=0000
Convert_16_9=0000
DisableInterlace=0000
[Paths]

QuEnc=D:\Program Files\DVD Rebuilder\QuEnc\QuEnc.exe
ReJig=D:\Program Files\DVD Rebuilder\ReJig\ReJig.exe
DECOMB=D:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
ProCoder=D:\Program Files\DVD Rebuilder\EclPro\EclPro.exe
MPEG2DEC=D:\Program Files\AviSynth 2.5\plugins\DGDecode.dll
Working=E:\DVD WORK\
Output=F:\DVD FINAL\
CCEBasic=D:\Program Files\Custom Technology\Cinema Craft Encoder Basic\cct2.exe
Source=



Thank you for the reply

[jdobbs]

That usually means there are files in your output path that are read-only and DVD-RB couldn't delete them. You probably at some point copied some files directly from DVD to that folder, and they inherited the flag... you need to delete them by hand.

[in_a_silent_way]

I doubled checked jdobbs' suggestion and formatted the drive on which the output path resides, recreated the output path, and pointed the DVD-RB output path to it. I then tried the rebuild phase III and got the same error. To reiterate, the error appears consistently after the rebuild has completed (100%) and during the updating of NAVPACKS. Phase III of the rebuilder log is posted below in the unlikely event that this might clarify my problem.

Thank you for your response.


[12:12:24] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_04
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Rebuilding segment 2 VOBID: 1 CELLID: 2
- Rebuilding segment 3 VOBID: 1 CELLID: 2
- Rebuilding segment 4 VOBID: 1 CELLID: 2
- Rebuilding segment 5 VOBID: 1 CELLID: 2
- Rebuilding segment 6 VOBID: 1 CELLID: 2
- Rebuilding segment 7 VOBID: 1 CELLID: 2
- Rebuilding segment 8 VOBID: 1 CELLID: 2
- Rebuilding segment 9 VOBID: 1 CELLID: 2
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 10 VOBID: 2 CELLID: 1
- Rebuilding segment 11 VOBID: 2 CELLID: 1
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 12 VOBID: 3 CELLID: 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Processing VTS_05
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 2 VOBID: 2 CELLID: 1
- Rebuilding segment 3 VOBID: 2 CELLID: 2
- Rebuilding segment 4 VOBID: 2 CELLID: 2
- Rebuilding segment 5 VOBID: 2 CELLID: 2
- Rebuilding segment 6 VOBID: 2 CELLID: 2
- Rebuilding segment 7 VOBID: 2 CELLID: 2
- Rebuilding segment 8 VOBID: 2 CELLID: 2
- Rebuilding segment 9 VOBID: 2 CELLID: 2
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 10 VOBID: 3 CELLID: 1
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 11 VOBID: 4 CELLID: 1
- Updating NAVPACKS for VOBID_04
- Rebuilding segment 12 VOBID: 5 CELLID: 1
- Updating NAVPACKS for VOBID_05
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Processing VTS_06
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 1
- Rebuilding segment 2 VOBID: 1 CELLID: 1
- Rebuilding segment 3 VOBID: 1 CELLID: 2
- Rebuilding segment 4 VOBID: 1 CELLID: 2
- Rebuilding segment 5 VOBID: 1 CELLID: 2
- Rebuilding segment 6 VOBID: 1 CELLID: 2
- Rebuilding segment 7 VOBID: 1 CELLID: 3
- Rebuilding segment 8 VOBID: 1 CELLID: 4
- Rebuilding segment 9 VOBID: 1 CELLID: 5
- Rebuilding segment 10 VOBID: 1 CELLID: 5
- Rebuilding segment 11 VOBID: 1 CELLID: 5
- Rebuilding segment 12 VOBID: 1 CELLID: 6
- Rebuilding segment 13 VOBID: 1 CELLID: 7
- Rebuilding segment 14 VOBID: 1 CELLID: 8
- Rebuilding segment 15 VOBID: 1 CELLID: 9
- Rebuilding segment 16 VOBID: 1 CELLID: 10
- Rebuilding segment 17 VOBID: 1 CELLID: 11
- Rebuilding segment 18 VOBID: 1 CELLID: 12
- Rebuilding segment 19 VOBID: 1 CELLID: 13
- Rebuilding segment 20 VOBID: 1 CELLID: 14
- Rebuilding segment 21 VOBID: 1 CELLID: 15
- Rebuilding segment 22 VOBID: 1 CELLID: 16
- Rebuilding segment 23 VOBID: 1 CELLID: 17
- Rebuilding segment 24 VOBID: 1 CELLID: 18
- Rebuilding segment 25 VOBID: 1 CELLID: 19
- Rebuilding segment 26 VOBID: 1 CELLID: 20
- Rebuilding segment 27 VOBID: 1 CELLID: 21
- Rebuilding segment 28 VOBID: 1 CELLID: 22
- Rebuilding segment 29 VOBID: 1 CELLID: 23
- Rebuilding segment 30 VOBID: 1 CELLID: 24
- Rebuilding segment 31 VOBID: 1 CELLID: 25
- Rebuilding segment 32 VOBID: 1 CELLID: 26
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 33 VOBID: 2 CELLID: 1
- Rebuilding segment 34 VOBID: 2 CELLID: 2
- Rebuilding segment 35 VOBID: 2 CELLID: 3
- Rebuilding segment 36 VOBID: 2 CELLID: 4
- Rebuilding segment 37 VOBID: 2 CELLID: 5
- Rebuilding segment 38 VOBID: 2 CELLID: 6
- Rebuilding segment 39 VOBID: 2 CELLID: 7
- Rebuilding segment 40 VOBID: 2 CELLID: 8
- Rebuilding segment 41 VOBID: 2 CELLID: 9
- Rebuilding segment 42 VOBID: 2 CELLID: 10
- Rebuilding segment 43 VOBID: 2 CELLID: 11
- Rebuilding segment 44 VOBID: 2 CELLID: 12
- Rebuilding segment 45 VOBID: 2 CELLID: 13
- Rebuilding segment 46 VOBID: 2 CELLID: 14
- Rebuilding segment 47 VOBID: 2 CELLID: 15
- Rebuilding segment 48 VOBID: 2 CELLID: 16
- Rebuilding segment 49 VOBID: 2 CELLID: 17
- Rebuilding segment 50 VOBID: 2 CELLID: 18
- Rebuilding segment 51 VOBID: 2 CELLID: 19
- Rebuilding segment 52 VOBID: 2 CELLID: 20
- Rebuilding segment 53 VOBID: 2 CELLID: 21
- Rebuilding segment 54 VOBID: 2 CELLID: 22
- Rebuilding segment 55 VOBID: 2 CELLID: 22
- Rebuilding segment 56 VOBID: 2 CELLID: 22
- Rebuilding segment 57 VOBID: 2 CELLID: 23
- Rebuilding segment 58 VOBID: 2 CELLID: 24
- Rebuilding segment 59 VOBID: 2 CELLID: 25
- Rebuilding segment 60 VOBID: 2 CELLID: 26
- Rebuilding segment 61 VOBID: 2 CELLID: 27
- Rebuilding segment 62 VOBID: 2 CELLID: 28
- Rebuilding segment 63 VOBID: 2 CELLID: 29
- Rebuilding segment 64 VOBID: 2 CELLID: 29
- Updating NAVPACKS for VOBID_02


The previous attempt produced a rebuilder log that was the same as the above except for the last line as follows:

- Updating NAVPACKS for VOBID_02
The specified source path is not valid. Reset to blank.

[jdobbs]

The specified source path is not valid. Reset to blank. The only time this message is show is when a project file is being loaded. Is this happening in a BATCH encode?

[in_a_silent_way]

Originally posted by jdobbs
The only time this message is show is when a project file is being loaded. Is this happening in a BATCH encode?

No, I have never used batch processing. Please note that the message 'The specified source path is not valid. Reset to blank.' only appeared in the rebuilder log once that I am aware of. It did not show up the last time I tried to rebuild after reformatting and recreating the output path, but I got the same error (Run-time error '75') at the same point in the rebuilding process (updating NAVPACKS) both instances.

Thanks, jdobbs for your attention to this problem! I hope this is not the result of operator error.

[Rockas]

Source=


Am I seeing wrong or your source path is empty?

edit: are you sure that you didn't, accidentaly, deleted one file from the source?... believe... it happened to me once... I lost about 2 days with that movie trying to figure what was wrong (DVD Rebuilder didn't exist at the time :D).

[in_a_silent_way]

Rockas, you are seeing right. I rip the DVD in ISO mode and when I copied the rebuilder.ini file at that moment the image was not mounted. However, it is mounted when I run DVD-RB. I reattached the rebuilder.ini file as it appears when I run DVD-RB.

With regard to the possibility that files were deleted accidentaly, it certainly is possible that deletion may have happened once without my noticing, but this error (Run-time 75) has occured after encoding at least three different titles, each of which were attempted several times each. It seems to me very unlikely that I could be deleting files each time.?.? Note that this error never happened before with twenty other titles, but now happens each time at the end of the rebuilding process (see above posts). I generally do not 'tinker around' with this computer (new software, hardware etc.) and have racked my (apparently small) brain for three weeks before posting, for anything that I might have done to cause this error. I am at the end of my rope.

Thanks for your suggestions. I really appreciate any time you can devote to my problem.


[Audio]
Selected=111011
[Options]
Mode=1
OneClick=0
ReduceOpt=1
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=0
RemoveDTS=1
Skin=Simple Blue
HC_Quality=1
HC_Matrix=1
CCE=2
HalfD1=0000
Convert_16_9=0000
DisableInterlace=0000
[Paths]

QuEnc=D:\Program Files\DVD Rebuilder\QuEnc\QuEnc.exe
ReJig=D:\Program Files\DVD Rebuilder\ReJig\ReJig.exe
DECOMB=D:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
ProCoder=D:\Program Files\DVD Rebuilder\EclPro\EclPro.exe
MPEG2DEC=D:\Program Files\AviSynth 2.5\plugins\DGDecode.dll
Working=E:\DVD WORK\
Output=F:\DVDFINAL\
CCEBasic=D:\Program Files\Custom Technology\Cinema Craft Encoder Basic\cct2.exe
Source=J:\VIDEO_TS\
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=2

[jdobbs]

Are you sure its mounted at the time of encode and rebuild? It has to be there throught the entire process.

[Rockas]

Let me add another question :)
Have you tried without mounting?

[in_a_silent_way]

jdobbs, I am absolutely certain the ISO image is mounted throughout the whole process. After the error appears, I have checked the virtual drive in 'Explorer' and the image is always mounted. When ripping, encoding, and rebuilding, this computer is not touched and is not connected to any network for access by anyone else.

I know if I were in your shoes, I would be skeptical, but I think the problem has to be less obvious (or at least I hope). I am generally very thorough and meticulous when troubleshooting a computer problem. Having said that, I welcome any suggestions as at this point, nothing would surprise me. Again, I really appreciate your attention to this problem.


-----------------
[06:06:15] Phase I, PREPARATION started.
- "Steal Space from Extras" mode is enabled.
- VTS_04: 97,340 sectors.
-- Scanning and writing .D2V file
-- Processed 6,913 frames.
-- Building .AVS and .ECL files
- VTS_05: 42,453 sectors.
-- Scanning and writing .D2V file
-- Processed 4,035 frames.
-- Building .AVS and .ECL files
- VTS_06: 3,713,726 sectors.
-- Scanning and writing .D2V file
-- Processed 199,025 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 63.6%
- Overall Bitrate : 3,464Kbs
- Space for Video : 3,703,504KB
- Movie improvement from extra reduction = 1.2%
- HIGH/LOW/AVERAGE Cell Bitrates: 4,534/107/3,464 Kbs
[06:20:06] Phase I, PREPARATION completed in 14 minutes.
[18:06:09] Phase II ENCODING started
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Creating M2V for VTS_04 segment 5
- Creating M2V for VTS_04 segment 6
- Creating M2V for VTS_04 segment 7
- Creating M2V for VTS_04 segment 8
- Creating M2V for VTS_04 segment 9
- Creating M2V for VTS_04 segment 10
- Creating M2V for VTS_04 segment 11
- Creating M2V for VTS_04 segment 12
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_05 segment 2
- Creating M2V for VTS_05 segment 3
- Creating M2V for VTS_05 segment 4
- Creating M2V for VTS_05 segment 5
- Creating M2V for VTS_05 segment 6
- Creating M2V for VTS_05 segment 7
- Creating M2V for VTS_05 segment 8
- Creating M2V for VTS_05 segment 9
- Creating M2V for VTS_05 segment 10
- Creating M2V for VTS_05 segment 11
- Creating M2V for VTS_05 segment 12
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_06 segment 2
- Creating M2V for VTS_06 segment 3
- Creating M2V for VTS_06 segment 4
- Creating M2V for VTS_06 segment 5
- Creating M2V for VTS_06 segment 6
- Creating M2V for VTS_06 segment 7
- Creating M2V for VTS_06 segment 8
- Creating M2V for VTS_06 segment 9
- Creating M2V for VTS_06 segment 10
- Creating M2V for VTS_06 segment 11
- Creating M2V for VTS_06 segment 12
- Creating M2V for VTS_06 segment 13
- Creating M2V for VTS_06 segment 14
- Creating M2V for VTS_06 segment 15
- Creating M2V for VTS_06 segment 16
- Creating M2V for VTS_06 segment 17
- Creating M2V for VTS_06 segment 18
- Creating M2V for VTS_06 segment 19
- Creating M2V for VTS_06 segment 20
- Creating M2V for VTS_06 segment 21
- Creating M2V for VTS_06 segment 22
- Creating M2V for VTS_06 segment 23
- Creating M2V for VTS_06 segment 24
- Creating M2V for VTS_06 segment 25
- Creating M2V for VTS_06 segment 26
- Creating M2V for VTS_06 segment 27
- Creating M2V for VTS_06 segment 28
- Creating M2V for VTS_06 segment 29
- Creating M2V for VTS_06 segment 30
- Creating M2V for VTS_06 segment 31
- Creating M2V for VTS_06 segment 32
- Creating M2V for VTS_06 segment 33
- Creating M2V for VTS_06 segment 34
- Creating M2V for VTS_06 segment 35
- Creating M2V for VTS_06 segment 36
- Creating M2V for VTS_06 segment 37
- Creating M2V for VTS_06 segment 38
- Creating M2V for VTS_06 segment 39
- Creating M2V for VTS_06 segment 40
- Creating M2V for VTS_06 segment 41
- Creating M2V for VTS_06 segment 42
- Creating M2V for VTS_06 segment 43
- Creating M2V for VTS_06 segment 44
- Creating M2V for VTS_06 segment 45
- Creating M2V for VTS_06 segment 46
- Creating M2V for VTS_06 segment 47
- Creating M2V for VTS_06 segment 48
- Creating M2V for VTS_06 segment 49
- Creating M2V for VTS_06 segment 50
- Creating M2V for VTS_06 segment 51
- Creating M2V for VTS_06 segment 52
- Creating M2V for VTS_06 segment 53
- Creating M2V for VTS_06 segment 54
- Creating M2V for VTS_06 segment 55
- Creating M2V for VTS_06 segment 56
- Creating M2V for VTS_06 segment 57
- Creating M2V for VTS_06 segment 58
- Creating M2V for VTS_06 segment 59
- Creating M2V for VTS_06 segment 60
- Creating M2V for VTS_06 segment 61
- Creating M2V for VTS_06 segment 62
- Creating M2V for VTS_06 segment 63
- Creating M2V for VTS_06 segment 64
- Creating M2V for VTS_06 segment 65
[02:39:36] Phase II ENCODING completed in 513 minutes.
[03:18:45] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_04
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Rebuilding segment 2 VOBID: 1 CELLID: 2
- Rebuilding segment 3 VOBID: 1 CELLID: 2
- Rebuilding segment 4 VOBID: 1 CELLID: 2
- Rebuilding segment 5 VOBID: 1 CELLID: 2
- Rebuilding segment 6 VOBID: 1 CELLID: 2
- Rebuilding segment 7 VOBID: 1 CELLID: 2
- Rebuilding segment 8 VOBID: 1 CELLID: 2
- Rebuilding segment 9 VOBID: 1 CELLID: 2
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 10 VOBID: 2 CELLID: 1
- Rebuilding segment 11 VOBID: 2 CELLID: 1
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 12 VOBID: 3 CELLID: 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Processing VTS_05
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 2 VOBID: 2 CELLID: 1
- Rebuilding segment 3 VOBID: 2 CELLID: 2
- Rebuilding segment 4 VOBID: 2 CELLID: 2
- Rebuilding segment 5 VOBID: 2 CELLID: 2
- Rebuilding segment 6 VOBID: 2 CELLID: 2
- Rebuilding segment 7 VOBID: 2 CELLID: 2
- Rebuilding segment 8 VOBID: 2 CELLID: 2
- Rebuilding segment 9 VOBID: 2 CELLID: 2
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 10 VOBID: 3 CELLID: 1
- Updating NAVPACKS for VOBID_03
- Rebuilding segment 11 VOBID: 4 CELLID: 1
- Updating NAVPACKS for VOBID_04
- Rebuilding segment 12 VOBID: 5 CELLID: 1
- Updating NAVPACKS for VOBID_05
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Processing VTS_06
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Rebuilding segment 1 VOBID: 1 CELLID: 1
- Rebuilding segment 2 VOBID: 1 CELLID: 1
- Rebuilding segment 3 VOBID: 1 CELLID: 2
- Rebuilding segment 4 VOBID: 1 CELLID: 2
- Rebuilding segment 5 VOBID: 1 CELLID: 2
- Rebuilding segment 6 VOBID: 1 CELLID: 2
- Rebuilding segment 7 VOBID: 1 CELLID: 3
- Rebuilding segment 8 VOBID: 1 CELLID: 4
- Rebuilding segment 9 VOBID: 1 CELLID: 5
- Rebuilding segment 10 VOBID: 1 CELLID: 5
- Rebuilding segment 11 VOBID: 1 CELLID: 5
- Rebuilding segment 12 VOBID: 1 CELLID: 6
- Rebuilding segment 13 VOBID: 1 CELLID: 7
- Rebuilding segment 14 VOBID: 1 CELLID: 8
- Rebuilding segment 15 VOBID: 1 CELLID: 9
- Rebuilding segment 16 VOBID: 1 CELLID: 10
- Rebuilding segment 17 VOBID: 1 CELLID: 11
- Rebuilding segment 18 VOBID: 1 CELLID: 12
- Rebuilding segment 19 VOBID: 1 CELLID: 13
- Rebuilding segment 20 VOBID: 1 CELLID: 14
- Rebuilding segment 21 VOBID: 1 CELLID: 15
- Rebuilding segment 22 VOBID: 1 CELLID: 16
- Rebuilding segment 23 VOBID: 1 CELLID: 17
- Rebuilding segment 24 VOBID: 1 CELLID: 18
- Rebuilding segment 25 VOBID: 1 CELLID: 19
- Rebuilding segment 26 VOBID: 1 CELLID: 20
- Rebuilding segment 27 VOBID: 1 CELLID: 21
- Rebuilding segment 28 VOBID: 1 CELLID: 22
- Rebuilding segment 29 VOBID: 1 CELLID: 23
- Rebuilding segment 30 VOBID: 1 CELLID: 24
- Rebuilding segment 31 VOBID: 1 CELLID: 25
- Rebuilding segment 32 VOBID: 1 CELLID: 26
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 33 VOBID: 2 CELLID: 1
- Rebuilding segment 34 VOBID: 2 CELLID: 2
- Rebuilding segment 35 VOBID: 2 CELLID: 3
- Rebuilding segment 36 VOBID: 2 CELLID: 4
- Rebuilding segment 37 VOBID: 2 CELLID: 5
- Rebuilding segment 38 VOBID: 2 CELLID: 6
- Rebuilding segment 39 VOBID: 2 CELLID: 7
- Rebuilding segment 40 VOBID: 2 CELLID: 8
- Rebuilding segment 41 VOBID: 2 CELLID: 9
- Rebuilding segment 42 VOBID: 2 CELLID: 10
- Rebuilding segment 43 VOBID: 2 CELLID: 11
- Rebuilding segment 44 VOBID: 2 CELLID: 12
- Rebuilding segment 45 VOBID: 2 CELLID: 13
- Rebuilding segment 46 VOBID: 2 CELLID: 14
- Rebuilding segment 47 VOBID: 2 CELLID: 15
- Rebuilding segment 48 VOBID: 2 CELLID: 16
- Rebuilding segment 49 VOBID: 2 CELLID: 17
- Rebuilding segment 50 VOBID: 2 CELLID: 18
- Rebuilding segment 51 VOBID: 2 CELLID: 19
- Rebuilding segment 52 VOBID: 2 CELLID: 20
- Rebuilding segment 53 VOBID: 2 CELLID: 21
- Rebuilding segment 54 VOBID: 2 CELLID: 22
- Rebuilding segment 55 VOBID: 2 CELLID: 22
- Rebuilding segment 56 VOBID: 2 CELLID: 22
- Rebuilding segment 57 VOBID: 2 CELLID: 23
- Rebuilding segment 58 VOBID: 2 CELLID: 24
- Rebuilding segment 59 VOBID: 2 CELLID: 25
- Rebuilding segment 60 VOBID: 2 CELLID: 26
- Rebuilding segment 61 VOBID: 2 CELLID: 27
- Rebuilding segment 62 VOBID: 2 CELLID: 28
- Rebuilding segment 63 VOBID: 2 CELLID: 29
- Rebuilding segment 64 VOBID: 2 CELLID: 29
- Updating NAVPACKS for VOBID_02

[in_a_silent_way]

Rockas, I have tried each one of the three DVD titles in both ISO and file mode, but that did not change the result - same error at the same point in the updating NAVPACKS process.

[Rockas]

What program do you use to Rip your DVDs to your HDD?

[in_a_silent_way]

Rockas-

currently running:

DVD Decrypter 3.5.4.0
AviSynth 2.55 build Sep 1 2004 (16:49:49)
CCE Basic 2.70.01.02
DVD-RB 0.80
DGDecode.dll
Daemon Tools 3.47

PIII 667mhz, 512MB RAM, 30GB HDD, Win 2000 Sp4
(underpowered but it did work in the past)

[Rockas]

Man... all I can tell you is that you must have done something wrong or there's something wrong with your computer.

You really must start over and follow the guide from: http://www.doom9.org/mpg/dvdrb.htm

Read it carefully...

By the way... delete Rebuilder's folder, and install a fresh new one... use my Installer.

[KYUSS]

i am getting the exact same error :(

when i found this thread i thought i would be cured :)

will take a look at the guide and create new working and output folders

[k2002rahmani]

KYUSS: I bet you are using a mounted image virtual drive aren't you? Try ripping from the DVD in file mode with DVD Decrypter, and set that as the source.

[KYUSS]

KYUSS: I bet you are using a mounted image virtual drive aren't you? Try ripping from the DVD in file mode with DVD Decrypter, and set that as the source.


no m8 i had ripped with file mode...........sorted it tho.

i made an iso from the VIDEO_TS folder using Clonedvd2 and it must have locked the folders for access.

working now a treat

thanks
KYUSS

[daprettiestdon]

Hi all,

I too am having runtime error 75...but it occurs during my rebuild stage....I have been experimenting with the VBR Passes and tried passes of 4 and 5 to see check quality...not sure if that would impact it...it was working fine before....but here's my rebuilder.ini and rebuilder.log info...would appreciate any help you can give on this matter...thx

rebuilder.ini:
[Audio]
Selected=100011
[Options]
Mode=1
OneClick=0
ReduceOpt=3
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=1
Skin=Rockas Original
HC_Quality=1
HC_Matrix=1
SkinVersion=3
CCE=1
HalfD1=00
Convert_16_9=00
DisableInterlace=00
Completed=1
[Paths]
QuEnc=C:\Program Files\DVD-RB\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB\ReJig\ReJig.exe
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
ProCoder=C:\Program Files\DVD-RB\EclPro\EclPro.exe
MPEG2DEC=C:\Program Files\DVD-RB\DGDecode.dll
Working=C:\WORK FOLDER\
Output=C:\OutPut Folder\
HC=C:\Program Files\DVD-RB\HC Encoder\HCbatch.EXE
CCENew=C:\Program Files\Cinema Craft Encoder SP v2.67.00.27\cctsp.exe
Source=F:\VIDEO_TS\

[Subpictures]
Selected=1000
[Setup]
Languages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
sLanguages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
[CCEOptions]
VBR_bias=30
Quality_prec=16
eclPasses=4
____________________________________________________
rebuilder.log info:
-----------------
[07:52:24] Phase I, PREPARATION started.
- "Steal Space from Extras" mode is enabled.
- VTS_03: 77,866 sectors.
-- Scanning and writing .D2V file
-- Processed 3,492 frames.
-- Building .AVS and .ECL files
- VTS_04: 3,033,357 sectors.
-- Scanning and writing .D2V file
-- Processed 173,014 frames.
-- Building .AVS and .ECL files
- VTS_05: 957,630 sectors.
-- Scanning and writing .D2V file
-- Processed 82,251 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.6%
- Overall Bitrate : 3,109Kbs
- Space for Video : 4,096,292KB
- Movie improvement from extra reduction = 20.4%
- HIGH/LOW/AVERAGE Cell Bitrates: 6,019/500/3,109 Kbs
[08:03:26] Phase I, PREPARATION completed in 11 minutes.
[08:03:35] Phase II ENCODING started
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Creating M2V for VTS_04 segment 5
- Creating M2V for VTS_04 segment 6
- Creating M2V for VTS_04 segment 7
- Creating M2V for VTS_04 segment 8
- Creating M2V for VTS_04 segment 9
- Creating M2V for VTS_04 segment 10
- Creating M2V for VTS_04 segment 11
- Creating M2V for VTS_04 segment 12
- Creating M2V for VTS_04 segment 13
- Creating M2V for VTS_04 segment 14
- Creating M2V for VTS_04 segment 15
- Creating M2V for VTS_04 segment 16
- Creating M2V for VTS_04 segment 17
- Creating M2V for VTS_04 segment 18
- Creating M2V for VTS_04 segment 19
- Creating M2V for VTS_04 segment 20
- Creating M2V for VTS_04 segment 21
- Creating M2V for VTS_04 segment 22
- Creating M2V for VTS_04 segment 23
- Creating M2V for VTS_04 segment 24
- Creating M2V for VTS_04 segment 25
- Creating M2V for VTS_04 segment 26
- Creating M2V for VTS_04 segment 27
- Creating M2V for VTS_04 segment 28
- Creating M2V for VTS_04 segment 29
- Creating M2V for VTS_04 segment 30
- Creating M2V for VTS_04 segment 31
- Creating M2V for VTS_04 segment 32
- Creating M2V for VTS_04 segment 33
- Creating M2V for VTS_04 segment 34
- Creating M2V for VTS_04 segment 35
- Creating M2V for VTS_04 segment 36
- Creating M2V for VTS_04 segment 37
[15:55:16] Phase II ENCODING started
- Creating M2V for VTS_04 segment 37
- Creating M2V for VTS_04 segment 38
[16:08:54] Phase II ENCODING started
- Creating M2V for VTS_04 segment 38
[16:33:36] Phase II ENCODING started
- Creating M2V for VTS_04 segment 38
- Creating M2V for VTS_04 segment 39
- Creating M2V for VTS_04 segment 40
- Creating M2V for VTS_04 segment 41
- Creating M2V for VTS_04 segment 42
- Creating M2V for VTS_04 segment 43
- Creating M2V for VTS_04 segment 44
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_05 segment 2
- Creating M2V for VTS_05 segment 3
[20:40:34] Phase II ENCODING started
- Creating M2V for VTS_05 segment 3
- Creating M2V for VTS_05 segment 4
- Creating M2V for VTS_05 segment 5
- Creating M2V for VTS_05 segment 6
- Creating M2V for VTS_05 segment 7
- Creating M2V for VTS_05 segment 8
- Creating M2V for VTS_05 segment 9
- Creating M2V for VTS_05 segment 10
- Creating M2V for VTS_05 segment 11
- Creating M2V for VTS_05 segment 12
- Creating M2V for VTS_05 segment 13
- Creating M2V for VTS_05 segment 14
- Creating M2V for VTS_05 segment 15
- Creating M2V for VTS_05 segment 16
- Creating M2V for VTS_05 segment 17
- Creating M2V for VTS_05 segment 18
- Creating M2V for VTS_05 segment 19
- Creating M2V for VTS_05 segment 20
- Creating M2V for VTS_05 segment 21
- Creating M2V for VTS_05 segment 22
- Creating M2V for VTS_05 segment 23
- Creating M2V for VTS_05 segment 24
- Creating M2V for VTS_05 segment 25
- Creating M2V for VTS_05 segment 26
- Creating M2V for VTS_05 segment 27
[22:49:23] Phase II ENCODING completed in 129 minutes.
[23:58:21] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
-----------------
[08:14:13] Phase I, PREPARATION started.
- "Steal Space from Extras" mode is enabled.
- VTS_01: 3,280,041 sectors.
-- Scanning and writing .D2V file
-- Processed 198,944 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 63.2%
- Overall Bitrate : 3,484Kbs
- Space for Video : 3,529,372KB
- Movie improvement from extra reduction = .0%
- HIGH/LOW/AVERAGE Cell Bitrates: 4,241/3,098/3,484 Kbs
[08:21:40] Phase I, PREPARATION completed in 7 minutes.
[08:28:21] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
[18:31:54] Phase II ENCODING completed in 603 minutes.

[daprettiestdon]

nvmd...I reinstalled dvd-rb and daemon tools and it works fine now...thx anywayz