Bug: ATI Multimedia Center break encoding

[Sirber]

AVS2AVI v1.39x (c) 2002-2004:
Christophe Paris, David Leatherdale, int21h, Moitah
http://www.avs2avi.org/
1pass, bitrate, all defaults. Tryed my custom build and "official p3" build.

From realanime config:
avs2avi .\temp\0.avs 0.avi -l .\profiles\x264.1.cod

Error: Unable to find the state file.

From cmdline (defaults):
avs2avi .\temp\0.avs 0.avi -c x264

Source:
* Filename: "C:\Program Files\RealAnime\temp\0.avs"
* FourCC: YV12
* Frames: 573
* Resolution: 640x480
* Frame rate: 23.976 FPS
Compressor:
* Name: x264 - H264/AVC encoder
* FourCC: X264
Destination:
* Filename: "C:\Program Files\RealAnime\temp\0.avi"

and not encoding :(

[edit]

Workd through vdub though

[Sirber]

VP7 fails too. I will format :devil:

[Sharktooth]

Uhm maybe i have an idea. Check the yv12 handler in the registry.

[buzzqw]

on my sistem (p4 winxp sp2) avs2avi 1.39x and rev 184 (p3) runs without problem...

BHH

[Sirber]

Originally posted by Sharktooth
Uhm maybe i have an idea. Check the yv12 handler in the registry. I can't find it. Where is it?

Thanks for your help :D

[edit]

HKEY_CURRENT_USER\Software\Microsoft\ActiveMovie\devenum\{33D9A760-90C8-11D0-BD43-00A0C911CE86}\yv12

?

[Sharktooth]

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32\vidc.yv12

ensure it's set to xvidvfw.dll or divx.dll

[Sirber]

It was set to ATI dll, I reinstalled "Helix codecs" but I still get the error.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32]
"midimapper"="midimap.dll"
"msacm.imaadpcm"="imaadp32.acm"
"msacm.msadpcm"="msadp32.acm"
"msacm.msg711"="msg711.acm"
"msacm.msgsm610"="msgsm32.acm"
"msacm.trspch"="tssoft32.acm"
"vidc.cvid"="iccvid.dll"
"VIDC.I420"="i420vfw.dll"
"vidc.iv31"="ir32_32.dll"
"vidc.iv32"="ir32_32.dll"
"vidc.iv41"="ir41_32.ax"
"VIDC.IYUV"="iyuv_32.dll"
"vidc.mrle"="msrle32.dll"
"vidc.msvc"="msvidc32.dll"
"VIDC.YVYU"="msyuv.dll"
"wavemapper"="msacm32.drv"
"msacm.msg723"="msg723.acm"
"vidc.M263"="msh263.drv"
"vidc.M261"="msh261.drv"
"msacm.msaudio1"="msaud32.acm"
"msacm.sl_anet"="sl_anet.acm"
"msacm.iac2"="C:\\WINDOWS\\system32\\iac25_32.ax"
"vidc.iv50"="ir50_32.dll"
"msacm.l3acm"="C:\\WINDOWS\\system32\\l3codeca.acm"
"wave"="wdmaud.drv"
"midi"="wdmaud.drv"
"mixer"="wdmaud.drv"
"VIDC.WMV3"="wmv9vcm.dll"
"VIDC.VP40"="vp4vfw.dll"
"msacm.voxacm160"="vct3216.acm"
"MSVideo"="vfwwdm32.dll"
"MSVideo8"="VfWWDM32.dll"
"wave1"="wdmaud.drv"
"midi1"="wdmaud.drv"
"mixer1"="wdmaud.drv"
"aux"="wdmaud.drv"
"vidc.VP70"="vp7vfw.dll"
"vidc.X264"="x264vfw.dll"
"VIDC.FPS1"="frapsvid.dll"
"vidc.VP60"="vp6vfw.dll"
"vidc.VP61"="vp6vfw.dll"
"vidc.VP62"="vp6vfw.dll"
"vidc.DIVX"="DivX.dll"
"VIDC.UYVY"="msyuv.dll"
"VIDC.YUY2"="msyuv.dll"
"VIDC.YVU9"="tsbyuv.dll"
"VIDC.VCR2"="ATIVCR2.DLL"
"VIDC.DRAW"="DVIDEO.DLL"
"VIDC.VCR1"="ATIVCR1.DLL"
"VIDC.YV12"="yv12vfw.dll"
"VIDC.YU12"="ATIYUV12.DLL "
"vidc.3IV2"="3ivxVfWCodec.dll"
"wave2"="wdmaud.drv"
"midi2"="wdmaud.drv"
"mixer2"="wdmaud.drv"
"aux1"="wdmaud.drv"
"wave3"="wdmaud.drv"
"midi3"="wdmaud.drv"
"mixer3"="wdmaud.drv"
"aux2"="wdmaud.drv"
"VIDC.MSUD"="msulvc05.dll"
"wave4"="wdmaud.drv"
"midi4"="wdmaud.drv"
"mixer4"="wdmaud.drv"
"aux3"="wdmaud.drv"
"vidc.ffds"="ff_vfw.dll"

[Sirber]

Just tryed at work, and it works.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32]
"aux"="mmdrv.dll"
"midimapper"="midimap.dll"
"msacm.imaadpcm"="imaadp32.acm"
"msacm.msadpcm"="msadp32.acm"
"msacm.msg711"="msg711.acm"
"msacm.msgsm610"="msgsm32.acm"
"msacm.trspch"="tssoft32.acm"
"vidc.cvid"="iccvid.dll"
"vidc.iv31"="ir32_32.dll"
"vidc.iv32"="ir32_32.dll"
"vidc.mrle"="msrle32.dll"
"vidc.msvc"="msvidc32.dll"
"wavemapper"="msacm32.drv"
"wdmaud.drv"="wdmaud.drv"
"midi"="wdmaud.drv"
"msacm.lhacm"="lhacm.acm"
"msacm.msg723"="msg723.acm"
"vidc.M263"="msh263.drv"
"vidc.M261"="msh261.drv"
"vidc.I420"="i420vfw.dll"
"msacm.iac2"="C:\\WINNT\\system32\\iac25_32.ax"
"vidc.iv50"="ir50_32.dll"
"wave"="wdmaud.drv"
"mixer"="wdmaud.drv"
"vidc.ffds"="ff_vfw.dll"
"VIDC.VP40"="vp4vfw.dll"
"msacm.l3acm"="C:\\WINNT\\system32\\l3codeca.acm"
"VIDC.UYVY"="msyuv.dll"
"VIDC.YUY2"="msyuv.dll"
"VIDC.YVYU"="msyuv.dll"
"vidc.yv12"="yv12vfw.dll"
"vidc.X264"="x264vfw.dll"
"vidc.PNG1"="C:\\WINNT\\system32\\CorePNG_vfw.dll"
"msacm.sl_anet"="sl_anet.acm"
"VIDC.WMV3"="wmv9vcm.dll"

:confused:

[buzzqw]

i also have an ati video card (aiw 9700pro) but yv12 is set to xvidvfw.dll

BHH

[Sirber]

Nope, doesn't help. I'll definitly format it tonight. Something more deep might be broken.

[buzzqw]

try reinstalling directx or media player 10...
BHH

[Sirber]

Reinstalling DX never resolved anything, and I don't have WMP10. Anyway, formating is like 2h, so it's not too bad :)

[Sirber]

Formated.

Now getting error #1, cannot find state file.

[Sirber]

ok, that was my fault. Encoding #1 now.

Many thanks to microsoft to have unstable products :devil:

[Sirber]

Crap. Just installed ATI Multimedia Center. Error is back. :devil:

[edit]

With producer, files are created and playable. I'll tweak realanime for it. Now testing avs2avi. It's encoding so far.

[edit]

At audio, I got a "chunk viewer" popup :confused:

[buzzqw]

i had installed 9.03 mmc
BHH

[Sirber]

RealAnime is running #1? (avs2avi and producer)

[shae]

Unable to find the state file happens to me when the AVS file is not in the current directory. Seems like a bug.