Besweet Will Not Operate

[kevsim]

I am trying to convert a .WAV file to AC3 format, using the GUI interface.
When I press Wav to AC3 I receive the following error message “Besweet has caused an error in <unknown> Besweet will now close”
I tried restarting the computer but the same fault appears.
No matter what I try to convert the same error message appears.
I have tried the Command Line, when I press GO nothing happens.
I am using Besweet version 1.4 with 1.5b29 added, also I used BS_ac3enc , Besweet GUIv 0.6.
My computer system is –
Pentium III 866Mz.
Windows ME.
Memory 512Mb.
Drive “C” 40Gb 7200 rpm.
Drive “D” 80Gb 7200 rpm.

I would appreciate some assistance.

Find Log file below -
BeSweet v1.5b29 by DSPguru.
--------------------------
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using lame_enc.dll v1.32 (8/8/2003), Engine 3.90 <http://www.mp3dev.org/>.

Logging start : 03/19/05 , 11:09:27.

c:\Program Files\BeSweet\BeSweet.exe -core( -input d:\Music\I still call Australia home re done.wav -output d:\National Park\AC3 test\Piano 1-New.wav -wavmp3 -logfile C:\WINDOWS\DESKTOP\BeSweet.log ) -ssrc( --rate 48000 ) -lame( -b 128 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : d:\Music\I still call Australia home re done.wav
[00:00:00:000] | Output: d:\National Park\AC3 test\Piano 1-New.wav
[00:00:00:000] | RIFF header will be added
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 22.1KHz
[00:00:00:000] | Dest. Sample-Rate: 48.0KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +-------- LAME -------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP3 bitrate : 128
[00:00:00:000] | Channels Mode : Joint Stereo
[00:00:00:000] | Error Protection: No
[00:00:00:000] +---------------------

kevsim

[KpeX]

From your logfile it appears you're converting to MP3-wav, not AC3. The crash might be a problem with the resampling operation. Try resampling the wav with a separate program (such as SSRC.exe) and then converting the result to MP3 with besweet.

Also take a look at belight, it's a very easy to use new GUI for besweet.

[kevsim]

KpeX,
thanks for the info.

I tried Belight, I pressed the START button, there was a small Black Screen flash then nothing more happened.

Below is the Log report for Belight.

One other question, are these programmes OK to run with Windows ME?

BeSweet v1.5b29 by DSPguru.
--------------------------
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using AC3enc.dll v1.20 (Feb 18 2004) by Fabrice Bellard (http://ffmpeg.org).

Logging start : 03/20/05 , 10:07:04.

BeSweet.exe -core( -input D:\Music\I still call Australia home Qantas Choir Testing.wav -output D:\Music\I still call Australia home Qantas Choir Testing3 -logfile D:\Music\I still call Australia home Qantas Choir Testing.log ) -azid( -s stereo -c normal -L -3db ) -ota( -hybridgain ) -ssrc( --rate 44100 ) -ac3enc( -b 256 -intel )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : D:\Music\I still call Australia home Qantas Choir Testing.wav
[00:00:00:000] | Output: D:\Music\I still call Australia home Qantas Choir Testing3
[00:00:00:000] | Floating-Point Process: No

kevsim

[kevsim]

I am trying to convert a .WAV file to MP3 format, using the GUI interface.
When I press Wav to MP3 I receive the following error message “Besweet has caused an error in <unknown> Besweet will now close”
I tried to convert WAV to AC3, same problem.
I tried restarting the computer but the same fault appears.
No matter what I try to convert the same error message appears.
I have tried the Command Line, when I press GO nothing happens.
I am using Besweet version 1.4 with 1.5b29 added, also I used BS_ac3enc , Besweet GUIv 0.6.
My computer system is –
Pentium III 866Mz.
Windows ME.
Memory 512Mb.
Drive “C” 40Gb 7200 rpm.
Drive “D” 80Gb 7200 rpm.

Does this programme run on Windows ME?

I would appreciate some assistance.

Find Log file below -
BeSweet v1.5b29 by DSPguru.
--------------------------
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using lame_enc.dll v1.32 (8/8/2003), Engine 3.90 <http://www.mp3dev.org/>.

Logging start : 03/19/05 , 11:09:27.

c:\Program Files\BeSweet\BeSweet.exe -core( -input d:\Music\I still call Australia home re done.wav -output d:\National Park\AC3 test\Piano 1-New.wav -wavmp3 -logfile C:\WINDOWS\DESKTOP\BeSweet.log ) -ssrc( --rate 48000 ) -lame( -b 128 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : d:\Music\I still call Australia home re done.wav
[00:00:00:000] | Output: d:\National Park\AC3 test\Piano 1-New.wav
[00:00:00:000] | RIFF header will be added
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 22.1KHz
[00:00:00:000] | Dest. Sample-Rate: 48.0KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +-------- LAME -------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP3 bitrate : 128
[00:00:00:000] | Channels Mode : Joint Stereo
[00:00:00:000] | Error Protection: No
[00:00:00:000] +---------------------

kevsim