BeSweet Error

[wlc108]

I'm trying to encode a mp3 using BeSweet from a AC3 file. I've had no problems with other dvds, but this one is giving me problems. It generates 2KB file and gives the following error:


BeSweet v1.5b29 by DSPguru.
--------------------------
Using azid.dll v1.9 (b922) by Midas (midas@egon.gyaloglo.hu).
Using lame_enc.dll v1.32 (8/8/2003), Engine 3.90 <http://www.mp3dev.org/>.

Logging start : 03/05/05 , 20:19:16.

C:\Program Files\GordianKnot\BeSweet\BeSweet.exe -core( -input E:\dvd\Projects\THE_FORGOTTEN_VTS_03_PGC1\THE_FORGOTTEN Track 1 English DELAY 0ms.ac3 -output E:\dvd\Projects\THE_FORGOTTEN_VTS_03_PGC1\THE_FORGOTTEN Track 1 English DELAY 0ms.mp3 -logfile E:\dvd\Projects\THE_FORGOTTEN_VTS_03_PGC1\THE_FORGOTTEN Track 1 English DELAY 0ms.log ) -ota( -hybridgain -d 0 ) -azid( -L -3db -c normal ) -lame( --alt-preset 128 ) -profile( robot4rip v0.5.0.1090 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : E:\dvd\Projects\THE_FORGOTTEN_VTS_03_PGC1\THE_FORGOTTEN Track 1 English DELAY 0ms.ac3
[00:00:00:000] | Output: E:\dvd\Projects\THE_FORGOTTEN_VTS_03_PGC1\THE_FORGOTTEN Track 1 English DELAY 0ms.mp3
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | PostGain normalize to : 0.97
[00:00:00:000] +-------- AZID -------
[00:00:00:000] | Input Channels Mode: 1+1, Bitrate: 32kbps
[00:00:00:000] | Output Stereo mode: Dolby surround compatible
[00:00:00:000] | Total Gain: 0.000dB, Compression: Normal
[00:00:00:000] | LFE levels: To LR -3.0dB, To LFE 0.0dB
[00:00:00:000] | Center mix level: BSI
[00:00:00:000] | Surround mix level: BSI
[00:00:00:000] | Dialog normalization: No
[00:00:00:000] | Rear channels filtering: No
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +-------- LAME -------
[00:00:00:000] | 'abr 128' preset is used
[00:00:00:000] +---------------------
[00:00:00:064] Stream error : Sync found after 640 bytes
[00:00:00:096] Stream error : Sync found after 640 bytes
[00:00:00.064] E12: No coupling strategy exists in first audio block
[00:00:00:096] Gain of 1.5dB had been asserted to file.
[00:00:00:096] Conversion Completed !
[00:00:00:096] Actual Avg. Bitrate : 112kbps
[00:00:00:000] <-- Transcoding Duration

Logging ends : 03/05/05 , 20:19:16.


Does anyone have any ideas? I tried re-ripping the ac3 and I still get the same error. However, the movie plays so the DVD is not messed up.

Thanks

[wlc108]

Hmm this may be related to the new protection used. I'll have to work on ripping it again.

[wlc108]

Oddly, my rip seems fine now that I've re-done it. It's just the ac3 reencode giving me problems. I may put this disk back on the shelf and give up for a while :) Unless anyone has had a similar problem and solved it.

[hubereevez]

same error here
[02:05:59.392] E12: No coupling strategy exists in first audio block
[00:00:00:064] Stream error : Sync found after 640 bytes

but a way much lines (1000)

hubert

edit : check the duration of your ac3, mine is wrong with 00:28:35 stead of 1:44:35. Try with vstrip.