Error 0006 : Inconsistency in source data between PREPARE and REBUILD

[goc]

this is something new ?
http://respawners.gamer.hr/upload/dvd-rb_error.gif

CCE Basic 2.69.1.4
QuENC 5.4
decoder 1.0.0.1
AviSynth 2.5.4

[jdobbs]

Nope. This means that one of the segments has a different framecount at rebuild than it did during prepare so DVD-RB can't apply the flags properly. Something has changed either through other processing or (more commonly) because one of the segment encodes was stopped prematurely.

Did you accidentally hit the "Abort" button on one of the encodes?

[goc]

first time i did, but the second time surely not coz i was full aware od the mistake. so my surprise was huge ,
... and how is possible to change something beteen processing ?

dvd is THE DAY AFTER r1

edit: dvd-rb 0.66a

[pg55555]

I am also experimenting this error with the dvd SIMONE R4 NTSC.

RB 0.66a and 0.67
CCE SP Trial 2.66
Avisynth 2.55
DGDECODE

The first time (with RB 0.66a) I used 3 steps method, tweaked with RBOpt 0.15 and stopped the encoding a couple of times.

But after I tried with One click and versions 0.66a and 0.67a, and just the rebuilding with 0.57, getting the same error at the same place (in the middle of the main movie VTS_01). In these cases I left all the audio streams, and use Steal Space from extras instead of Half D1

I have backuped more than 100 DVD with this setup before and around 5 more after, withouth problems

[Methanoid]

I got this error for the first time (likewise done many disks before).

Using one click mode, no extras (rb-opt etc) and no cancel encodes. Also used CCE and QuEnc. The title is ERIK THE VIKING PAL version.

Is there any workaround?

Funny but I have done LOTS of disks with DVDrb but only in last week or so have I found 2 disks that just would not do. This one and a compilation called B Movies (of 3 SciFi movies) and cos the studio made it with 49 VTS or some stupid number I wondered if that was the prob. In the end I had to use Shrink (spits!!)

[radar]

hello,i am having the same error.using dvdrb.66 and quenc.56.tried 4 diff. movies,3 button and one button modes,all with english only.same errors for all of them.also without stopping the encoding process.any advice,thanks

[Ngr]

I also get this error with COLD CREEK MANOR R2

RB 0.67
CCE SP Trial 2.67.00.27
Avisynth 2.55
DGDECODE

I have tried several different approaches but with no success. While rebuilding the dvd it always reaches about 718 MB size on output dir and then produces this error.

This is the only dvd that produces this error out of several i have tried.

[Methanoid]

I was wondering about trying an older version of DVD-Rb on my "problem" disks... its just such a pisser to leave it overnight and come back and find its done very little and then hung....

[arctostaphyllos]

im getting the same error code in certain movies f.e various alien quadrilogy dvds, i do think it´s a multiangle and/or seamless branching related stuff because it normally happens with that kinda title sets but as far as i now it´s not a 100% rule coz i detected the same bug in other dvds - f.e. monsters of metal vol2 - without angle/s and/or seamless bra.I tried all configurations possible on earth plus used all the encoders supported by dvd-rb , always with the same result : the prepare and encode phases run ok but the rebuild one crashes reporting the infamous error code.
dvd-rb is a tremendous appz , the best thing happened since dvd decrypter or dvdshrink , a tool paypal worthwhile for sure but i think we´re facing a bug which need to be solved soon.

[TheSeeker]

Hey arctostaphyllos,

I had alot of problems with the aliens disc in the alien quadrilogy, they are seamless branching. No matter what I did i could not get dvd rb to work on the disc. I ended up settling for way less than perfect output and used IC8 (which is the only app that would work with this movie, even dvd shrinks output was choppy and did not play right). My point being is that I think the alien quadrilogy dvd's are either very poorly authored/mastered or most apps just dont have very good seamless branching support. Of course dvd rb is still in beta and its multi angle/seamless branching support is still very new.

[arctostaphyllos]

this might be useful in order to solve the problem : if you use the procoder mode , once the avisynth file responsible for the inconsistency is loaded by the encoder - procoder as i´ve just said - the process stop in that segment arguing : " the settings of this preset are invalid ".Any other encoder mode will just go on ending up with the infamous ERROR 0006 during the rebuild phase.
Thx for the post THESEEKER i backed up de quadrilogy dvds the same way you did - IC8+ITOOL - but i had to leave the menu structure just the way it was because any single attemp of modifying it caused the dvd to hang up.

[TheSeeker]

Yea same here. I couldnt touch anything on the alien quadrilogy except removing audio. Otherwise it wouldnt play right. I wonder if this is intentional?

[jdobbs]

Well I guess I gotta get me a copy of that one. I'm not one to avoid a challenge. How expensive is the set?

[wmansir]

It's about $75. I saw somewhere that Costco has it for $65.

4 movies on 4 discs plus 5 more of bonus material. I think all but Resurrection are seamless branching with theatrical/directors cuts, or "extended" in the case of Alien3 because David Fincher did not want to be involved.

EDIT: I was wrong, they are all seamless. Though Resurrection's new cut isn't very different from the threatrical.

[spase]

I get this error code as well.

using:
dvdrb 0.67
QuEnc 0.56
DGDecode

DVD: Hero (2004 release)

Upon the rebuild phase I get the error 0006. I was using half d1 and half space for extras. I will try without this to see if this is the problem.

If this doesnt fix it, I will try with MPEG2Dec3dg instead.

[Rockas]

A little offtopic :)
@spase
I was using half d1 and half space for extras.

Why don't you just remove all the extras!!! :)

keep iy UP

[lamster]

Originally posted by spase
DVD: Hero (2004 release)

The release I saw had 2 copies of the movie - Title one in widescreen format, and Title 2 in fullscreen. The fullscreen version actually contained the widescreen version with black bars top and bottom to make it fit the fullscreen aspect ratio. Furthermore, there's no menu navigation to title 2. Therefore, I just dropped title 2 and made a back up with no compression.

[spase]

Originally posted by lamster
The release I saw had 2 copies of the movie - Title one in widescreen format, and Title 2 in fullscreen. The fullscreen version actually contained the widescreen version with black bars top and bottom to make it fit the fullscreen aspect ratio. Furthermore, there's no menu navigation to title 2. Therefore, I just dropped title 2 and made a back up with no compression.

ill have to check this out...

[spase]

hmm seems this isnt the case. what is the best tool to use to sort of re-author the dvd in such a way to remove extras... ifo edit? pgc edit?

[spase]

ok i used a combo of menuedit free, pgcedit, and ifoedit to remove what i didnt want (really just audio streams) and to disable the referring buttons.

i also re aligned the vts sectors with ifoedit.

basically i did all this so i can have rebuilder not strip any streams on its own (to see if maybe that was the problem).

i guess we will find out in a good 10 hrs or so when encoding is finished.

edit: also used half space/half d1 for extras and RB-Opt to tweak bitrates. hopefully this wont cause problems.

[spase]

ok i simply cant get this to work...

@jdobbs: maybe you should check out the hero dvd to see if you can figure it out... in any case it is a good movie.

i think im gonna have to try dvd shrink on this one. hopefully dvd-rb will have no trouble with the next disc.

edit: just so you know, the error comes when in the rebuilding phase and it gets to rebuilding vob id 3 i believe... right at the end when the progress bar is about 1 or 2 pixels shy of being full.

here is the log:

[21:00:47] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Updating NAVPACKS for VOBID_01
- Rebuilding segment 1 VOBID: 2 CELLID: 1
- Updating NAVPACKS for VOBID_02
- Rebuilding segment 2 VOBID: 3 CELLID: 1

[jdobbs]

@spase

ok i used a combo of menuedit free, pgcedit, and ifoedit to remove what i didnt want (really just audio streams) and to disable the referring buttons.

You may want to try letting DVD-RB remove the streams and skip all the extra processing. Have you tried it alone?

[spase]

yea this is how i tried it originally.

it always stops at the same spot though.... the one i mentioned above.

dvd shrink had no problems (althought picture quality could be better :eek: )

[damian_dimitri]

Hello

anything new....on this subject?

I have the same problem with The Patriot

Damian

[houstonbofh]

This will be a developers nightmare. I am one of the guys who pushed to get 98se support back while everyone said upgrade. Well, my last legacy app finally went XP compatable, so I blew away and reinstalled. Took a while, so I also had time to jump a few versions for all the software. As of now, I have yet to get one sucess. All of them fail with Error #0006 ... inconsistancy ...

Versions;
XP Pro SP2 with security hotfixes.
DVDrb .67
QuEnc .56

Settings;
Starsky and Hutch with steel space at %25, 2 pass, and trellis.
Bounce with steel space at %25, 2 pass, and trellis.
Bounce as one click, with no steel space, with 2 pass and trellis.

Any hints?

[jdobbs]

It's working on thousands of other PCs running XP... I have to believe it is something unique to your configuration.

[candsh]

Only advise I can give is go ahead and buy a CCE Basic for 59.00. I have the same setup you have programming wise and NEVER have a problem. The only thing I have played with at all in the way of preprocessing is VOBBlanker and only Blank extras when I do. Easy to use and can do some advanced pre editing but have left those alone. So, I wind up with a perfect movie and a working menu (so what if it has a couple of buttons on it that now lead to nothing, didn't want to see them anyway). CCE Basic in RB has almost no choices but to just fire up and make perfect movies. I am entertained by the continuing arguement about "how many passes to make" I don't have a choice and have a great movie every time. I get two passes no matter what day of the week I encode on and I doubt that anyone has ever made a better back-up with RB than I am getting. Was stealing space frome the extras and getting great movies and crappy previews. That is why I went to VOB Blanker for help. It doesn't remove anything really, just substitutes a "Blank" file in the place of the original. I promise, you would not be disssapointed with Basic and simple seems to be better and very fast.....about 2 1/2 hrs from start to ready to burn on most encodes.
Please don't take wrong. I am NOT saying my way is the only way but I will guarantee it works!! And I know a lot of others enjoy all of the tinkering and editing and I say knock yourself out......all I want is a great movie to watch when I am done.

[Rockas]

@houstonbofh

Have you tried installing Rebuilder using my installer?

keep it UP

[houstonbofh]

It's working on thousands of other PCs running XP... I have to believe it is something unique to your configuration.

I don't doubt it. I was saying from a standpoint of what varibles changed since my last sucess. :D Everything...

Have you tried installing Rebuilder using my installer?

No. First I heard of it. Where do I find it?

[Rockas]

well you haven't search for it :)

check on: http://forum.doom9.org/showthread.php?s=&threadid=84487

keep it UP

[spase]

i found the issue, at least in my case.

I had to turn off the AudioDub(BlankClip()) option to avoind the inconsistencies. I think this is due to the new quenc 0.56 muxxing the video with blank audio.

@jdobbs: this could be worked around if there is a no audio command line switch for QuEnc (i swear there was one, but now I can't seem to find it...)

for now though i will just disable the AudioDub(BlankClip())

[yourskeptic]

I have been having the same problem, with both rejig and QuEnc. Multiple disks. Decrypted with dvd decryptor and dvdshrink. I get to the rebuild phase and a few minutes in, boom, same problem, every time. Thoughts?

[TheSeeker]

isnt that AudioDub(BlankClip()) thing only needed if you have an amd athlon proc or something?

[spase]

i think its if you have amd athlon something or another AND you are using CCE... not sure though.

no troubles so far using it turned off with QuEnc

[jdobbs]

I'll just disable it with QuEnc. Why is it too much trouble just to unclick it in the AVS menu?

[houstonbofh]

I'll just disable it with QuEnc. Why is it too much trouble just to unclick it in the AVS menu?

Just like the old IBM joke... "Pressing one button, $5. Knowing which button to press, $9,995." I guess today, it would change to "priceless." :D