error from d2Sroba ??

[tbmarcom]

hi,
when try to convert in DVD2SVCD with option DVD to DVD
i get an error.
i have the vobs and ifo of the dvd on hdd. i start d2sroba
and click all like i want to have.
then the program works a lot on hdd (zbbbzbbrbrbbbchrrrzbrr or so)
after a time,
i starts cce 2.67.0.27 , and then appears

can not find CCE_Video_Information_File.vaf

i dont get this, when using dvd2svcd "without" d2sroba

i tried with d2sroba 3.60 & 3.76

have i set some options wrong ?

any ideas ?

[tylo]

Welcome to the forum. Please, post the D2SRoBa_log.txt file located in the output folder.

[tbmarcom]

--------------------------------------------------------
D2SRoBa v3.76, by Tylo
--------------------------------------------------------
- WIN_2000 - AutoIt 3.0.103.0
- 2004-10-12 02:57:45
--------------------------------------------------------
- INI file : E:\Programme\DVD2SVCD\Tylo\D2SRoBa.ini
- Output type : DVD
- CD size : 4464
- Sample file size : 1.0% (delete previous: Yes)
- Adjust estimated : 1.2% (accuracy tweak: Yes)
- Sizing pass : Encode (1 pass) if opv pass < -2.5% from target, or Q > 40
Transcode (Requant) if opv pass > 0.0% above target, and Q <= 40
- Cond. filtering : No
- Run mode : Normal
--------------------------------------------------------
- Waiting for CCE window, or 'Ripping done' message box...
- Detected a CCE encode window
- Detected the movie encode window - shutting down
--------------------------------------------------------
- 2004-10-12 03:09:04
- Copying D2SRoBa.ini to project dir F:\tigerdragon\
- Avisynth setup: LanczosResize
- D2S ver. 1.2.2.3, CCE ver. 2.67.0.27
- Setting process priority 0
--------------------------------------------------------
- Movie length : 01:42:45 (154138 frames, 25 fps)
- D2S audio select : 448 + 0 kbps
- D2S video calc. : 5492 kbps, 1 CDs
- Select ranges : every 1200, select 12 frames
- Sample frames : 1548
--------------------------------------------------------
Calculations:
- 1 CD: video_br=5492 (5492) audio_br=448+0 video_sz=4232629480 fill=100% cbr=0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Using num CDs : 1
- Target mpv br : 5492 (max 8000) kbps, size=4232629480 bytes
--------------------------------------------------------
Search for Q:
- Sample enc. Q=14 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=14 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=6 : 0 kbps, err=-100%, size=0, sample sz=0
- Switch to binary search
- Sample enc. Q=6 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=3 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=3 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=2 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=2 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=1 : 0 kbps, err=-100%, size=0, sample sz=0
- Sample enc. Q=1 : 0 kbps, err=-100%, size=0, sample sz=0
--------------------------------------------------------
- Determined Q : 1 = Round(1 + (-100/0)) with 1.2% adjustment.
--------------------------------------------------------
- 2004-10-12 03:13:31
- Start movie OPV encoding (Q 1)

on each line Sample enc. it asks for "CCE_Video_Information_File.vaf"
and says it misses the "CCE_Video_Information_File.vaf"
i have to klick many times ok, then it starts encoding
but why does it miss the CCE_Video_Information_File.vaf on sample enc?

[tylo]

No clue. Please post the D2SRoBa.ecl file too (preferable between [size=1] ... [/size ])

[tbmarcom]

; Cinema Craft Encoder SP -- Encoder Control List

[item]
title=D2SRoBa.avs
vid_out=1
vaf_out=0
aud_out=0
aud_mode=0
vid_file0=F:\tigerdragon\D2SRoBa_Q1.mpv
vid_file1=F:\tigerdragon\D2SRoBa_Q1.mpv
vaf_file=F:\tigerdragon\CCE_Video_Information_File.vaf
aud_file=F:\tigerdragon\Encoded_Video_CCE_PAL.mpv.mp2
file_focused=0
video_type=2
packet_size=2048
tc_offset=0
tc_ref_frm=0
drop_frame=0
width=720
height=576
frame_rate_idx=3
cbr_brate=5492
opv_q_factor=1
opv_brate_min=800
opv_brate_max=8000
vbr_brate_avg=6000
vbr_brate_min=2000
vbr_brate_max=9000
vbr_bias=20
vbr_pass=3
create_new_vaf=0
seq_endcode=1
dvd=0
half_width=0
half_height=0
uscc=0
blanking=0
blank_top=0
blank_bottom=0
blank_left=0
blank_right=0
offset_line=0
sde_display_w=540
sde_display_h=576
sde_color_description=1
sde_video_format=1
sde_color_primaries=5
sde_trans_chars=5
sde_matrix_coeffs=6
lum_level=1
aspect_ratio=3
gop_m=3
gop_nm=4
gop_hdr=12
seq_hdr=1
all_closed_gop=0
fix_gop_length=1
fix_vbv_delay=0
pulldown_detect=0
letter_box=0
panscan=0
qmat_idx=-1
qmat_name=
qmat=
8 16 19 22 26 27 29 34
16 16 22 24 27 29 34 37
19 22 26 27 29 34 34 38
22 22 26 27 29 34 37 40
22 26 27 29 32 35 40 48
26 27 29 32 35 40 48 58
26 27 29 34 38 46 56 69
27 29 35 38 46 56 69 83
16 17 18 19 20 21 22 23
17 18 19 20 21 22 23 24
18 19 20 21 22 23 24 25
19 20 21 22 23 24 26 27
20 21 22 23 25 26 27 28
21 22 23 24 26 27 28 30
22 23 24 26 27 28 30 31
23 24 25 27 28 30 31 33
samples_per_sec=44100
stereo=2
brate_idx=7
crc=1
pict_name=
pict_type=0
pict_level=2
q_char_f=16
progressive=1
alternate_scan=0
intra_dc_prec=-1
h_filter=1
h_filter_idx=8
v_filter=1
v_filter_val=4
dither=0
dither_max=8

[file]
name=F:\tigerdragon\D2SRoBa.avs
stream_no=0
frame_first=0
frame_last=1548
encode_first=0
encode_last=1548

mpeg1=0
timecode=0x00000000
mpeg1_cps=1
chapter=0:Chapter0
chapter=4875:Chapter1
chapter=9225:Chapter2
chapter=16525:Chapter3
chapter=21077:Chapter4
chapter=24332:Chapter5
chapter=29623:Chapter6
chapter=34377:Chapter7
chapter=38411:Chapter8
chapter=42694:Chapter9
chapter=47605:Chapter10
chapter=52677:Chapter11
chapter=55577:Chapter12
chapter=62725:Chapter13
chapter=68509:Chapter14
chapter=74086:Chapter15
chapter=80955:Chapter16
chapter=84774:Chapter17
chapter=88002:Chapter18
chapter=91693:Chapter19
chapter=94616:Chapter20
chapter=98748:Chapter21
chapter=105430:Chapter22
chapter=109378:Chapter23
chapter=112717:Chapter24
chapter=119203:Chapter25
chapter=125960:Chapter26
chapter=131944:Chapter27
chapter=135670:Chapter28
chapter=139610:Chapter29
chapter=144105:Chapter30
chapter=148262:Chapter31
quality_prec=17
use_filter=0
filter_val=2
non_linear=0



thats all

again it was so that it asks for the "CCE_Video_Information_File.vaf
and says it miss it, i got to klick sometimes OK, then it starts
encoding

on maybe its for interest, i am using cce sp original :-)

[tylo]

Yes, the problem is that CCE 2.67.0.27 retail (and newer) uses different values for 'video_type' than the EclCCE + the trial version. And you can't use EclCCE 1.81 with CCE 2.67.0.27 retail. I'll release a new version of D2SRoBa at some point that will handle it.

Read this for details: http://forum.doom9.org/showthread.php?s=&threadid=81972

[tbmarcom]

ok.
please add in History on your d2Sroba website
if retail cce is added.

thanks for your effort