Log in

View Full Version : Burning error using dvd shrink - a disc compatability problem?

ler01kjh
25th September 2004, 12:06
I haven't had any problems at all backing up dvds, using dvd decrypter 3.2.3 to rip and Dvd shrink 3.2.0.15 to copy. The first discs I bought were InfinitiŽ Samurai Electric Blue 4x DVD-r.

I've since run out of these and have started to use Budget Yellow 4xdvd-r.

The first couple of dvds came out successful, but each one since then has had a burn error. Copied below is the error from dvd strink. The dvd-writer I use is: LG Double Layer 12x DVD DUAL R/RW/RAM IDE Burner - OEM.

I haven't a clue what the error message means but if anyone can suggest the solution I would be really grateful. I assume it is probably incompatability of the discs? Is this most likely, and whats the cause?

ERROR MESSAGE BELOW:
1A20-020E-0000-1349-1210-6697*

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.6
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST38420A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-ROM MAX 52X atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120 F: CDRom0
ATAPI CD-ROM MAX 52X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 223MB (229152kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.9.2004
NeroAPI
10:23:27 #1 Phase 112 File APIProgress.cpp, Line 266
DVD-Video files reallocation started

10:23:27 #2 Phase 114 File APIProgress.cpp, Line 266
DVD-Video files reallocation completed (no file modified)

10:23:27 #3 Phase 111 File APIProgress.cpp, Line 266
DVD-Video files sorted

10:23:27 #4 Text 0 File Reader.cpp, Line 118
Reader running

10:23:27 #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:23:27 #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4120B running

10:23:27 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

10:23:27 #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

10:23:27 #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-At-Once, using DVD media

10:23:28 #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

10:23:28 #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

10:23:28 #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: INFOSM - ART01
Disc Application Code: 64, Disc Physical Code: 193

10:23:28 #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:23:28 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

10:23:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

10:23:28 #16 Phase 24 File APIProgress.cpp, Line 266
Caching of files started

10:23:28 #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

10:23:28 #18 Phase 25 File APIProgress.cpp, Line 266
Caching of files completed

10:23:28 #19 Phase 36 File APIProgress.cpp, Line 266
Burn process started at 4x (5,540 KB/s)

10:23:28 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:23:28 #21 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode

10:23:28 #22 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON

10:23:28 #23 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: No

10:23:28 #24 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:23:38 #25 Text 0 File Cdrdrv.cpp, Line 1289
10:23:38.281 - HL-DT-ST DVDRAM GSA-4120B\H1 T0 : Queue again later

10:37:26 #26 SCSI -1061 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x263D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 0x00 0x00 0x21 0x52 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x24 0x00 0x0C 0x44 0x86

10:37:26 #27 CDR -1061 File Writer.cpp, Line 304
Internal target failure

10:37:26 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:37:26 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:37:26 #30 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 2183871

10:37:28 #31 Phase 38 File APIProgress.cpp, Line 266
Burn process failed at 4x (5,540 KB/s)

10:37:28 #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

10:37:28 #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/11/2003 22:07:28
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/11/2003 22:07:28
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 20/08/2004 22:39:41 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 06/04/2004 19:39:20 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 06/04/2004 19:40:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 06/04/2004 19:43:22 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
LIGHTNING UK!
26th September 2004, 16:35
Try upgrading to the A111 firmware.
ler01kjh
28th September 2004, 10:05
Thanks for the suggestion. Upgraded the firmware, and successfully burnt another disc! But the second I tried failed again :(
What does firmware upgrade do that the previous firmware didn't?
ler01kjh
6th October 2004, 10:43
Hi, I tried using nero instead of dvd shrink this time, but got a 'focus or tracking problem'. Error log is below. I also used Nero's system check facility, and noticed that under the 'aspi' tab, for 'system' it says there are aspi file(s) missing. On 'nero' it says all aspi files are present and working.

I'm completely ignorant to what this means. Would be grateful for any suggestions please!

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.6 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A111 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-ROM MAX 52X >Version: 1.13 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST38420A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-ROM MAX 52X atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120 F: CDRom0
ATAPI CD-ROM MAX 52X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 208MB (213572kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2004
UDF/ISO compilation
22:55:02 #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started

22:55:02 #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)

22:55:02 #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

22:55:02 #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted

22:55:02 #5 Text 0 File Reader.cpp, Line 118
Reader running

22:55:02 #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4120B running

22:55:02 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

22:55:02 #8 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

22:55:02 #9 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

22:55:02 #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

22:55:02 #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

22:55:02 #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: INFOSM - ART01
Disc Application Code: 64, Disc Physical Code: 193

22:55:02 #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:55:02 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

22:55:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

22:55:03 #16 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

22:55:03 #17 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

22:55:03 #18 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

22:55:03 #19 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 4x (5,520 KB/s)

22:55:03 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:55:03 #21 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode

22:55:03 #22 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON

22:55:03 #23 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes

22:55:03 #24 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:55:12 #25 Text 0 File Cdrdrv.cpp, Line 1289
22:55:12.484 - HL-DT-ST DVDRAM GSA-4120B\H1 T0 : Queue again later

23:08:31 #26 SCSI -1039 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09550000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x20 0x2A 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01

23:08:31 #27 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

23:08:31 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

23:08:31 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

23:08:31 #30 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 2107951

23:08:33 #31 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/11/2003 22:07:28
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/11/2003 22:07:28
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 20/08/2004 22:39:41 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 06/04/2004 19:39:20 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 06/04/2004 19:40:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 06/04/2004 19:43:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 20:05:04 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
LIGHTNING UK!
6th October 2004, 12:21
Firmware updates are just like software updates - they fix problems!

Try getting some different (better quality) media, your drive doesnt appear to like the discs you're currently using.