herokid
1st August 2004, 20:06
Somehow or other, Ive lost the ability to run xvid thru dvd2svcd (to any mpg). I somehow created this prob as xvids used to work fine.
I have tried several source files from different suppliers, all have the same symptom. I load the avi and hit the preview frame getting a message "Avisource: Could not compress frame 0 (C:\.......,line 2".
using ver 1.2.2.B1. CCE ver 2.5. WinME
When I load the avi into VD, info says vid=xvid mpeg-4 codec, aud=AC-3 ACM Decomprssor. An info utility called YAAI says the audio stream is "8192-AC3 Audio".
When I decompress the audio prior to load into VD, info says vid=xvid mpeg-4 codec, aud=PCM.
With audio of type 'AC3' or 'PCM', dragging the VD slider gives message "Error decompressing video fram xxx. An unknown error occurred (may be corrupt data). (error code -100)". Needless to say, VD will not process the data any more so than dvd2svcd. A manual load to TMPGE yields a blank screen preview.
Numerous codecs installed. Of relevence would seem to be Xvid MPEG-4 video codec and AC-3 ACM Decompressor.
The XVIDS play fine using wither WMP or my default ATI file player.
Follows is a sample log from a convwewsion attempt to SVCD. The whole process blew thru in about 5 minutes resulting in a 60MB mpg of 45 minutes of the correct audio on a blurry "AviSource Could not decompress......" frozen frame.
Appreciate any help.
WNASPI32.DLL 4.6.0.1021
--------------------------------------------------------
- 8/1/2004 1:44:09 PM
- AVI to SVCD Conversion
- AVI2DVD ver. 1.2.2 build 1
--------------------------------------------------------
Initializing
- D:\stuff.avi
Initializing finished.
--------------------------------------------------------
- 8/1/2004 1:44:12 PM
- Free on drive D: 73593.91 mb
- AUDIO Extraction
--------------------------------------------------------
Audio extraction finished.
--------------------------------------------------------
- 8/1/2004 1:44:31 PM
- Free on drive D: 73526.22 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: D:\dvd2svcd\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\dvd2svcd\Extracted_audio_1.ac3" -output "D:\DVD2SVCD\Encoded_audio_1.mp2" -logfile "D:\DVD2SVCD\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )
Audio conversion of D:\dvd2svcd\Extracted_audio_1.ac3 finished.
Audio conversion finished.
--------------------------------------------------------
- 8/1/2004 1:49:56 PM
- Free on drive D: 73468.16 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------
Executing Cinema Craft Encoder.
StreamSectors: 4682829788
AudioSectors: 413672
VideoPAPO: 72533124
ScanOffsetBytes: 360
SeqAligningBytes: 22880
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 4609859748.00
Seconds: 17.00
CalcMPEGStream: 4609859748.00
Frames: 240
CDSize: 4480.00
Number of CDs: 1
Cut point 4476.00
Variable Settings:
Frames: 240
Anti Noise Filter: Off
Passes: 3
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 2000
Max. bitrate: 8000
Avg. Bitrate: 2500
Aspect Ratio: 4:3 (No borders, encoded as 4:3)
---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.5PL\MPEG2DEC\MPEG2D~1.DLL")
AVISource("D:\SG-107~1\SG-107~1.AVI",audio=false)
ConvertToYUY2()
BilinearResize(720,576)
----AVS End----
Closing program
CCE Max Speed: 16.200
Video Encoding finished.
--------------------------------------------------------
- 8/1/2004 1:50:41 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:43 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:46 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:49 PM
- Free on drive D: 73467.13 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 0
Executing bbMPEG.
Variable Settings:
Movie offset: 0 seconds
Cut point: 4476 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\dvd2svcd\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.
Image creation finished.
--------------------------------------------------------
- 8/1/2004 1:50:59 PM
- Free on drive D: 73407.50 mb
- Conversion done!
--------------------------------------------------------
I have tried several source files from different suppliers, all have the same symptom. I load the avi and hit the preview frame getting a message "Avisource: Could not compress frame 0 (C:\.......,line 2".
using ver 1.2.2.B1. CCE ver 2.5. WinME
When I load the avi into VD, info says vid=xvid mpeg-4 codec, aud=AC-3 ACM Decomprssor. An info utility called YAAI says the audio stream is "8192-AC3 Audio".
When I decompress the audio prior to load into VD, info says vid=xvid mpeg-4 codec, aud=PCM.
With audio of type 'AC3' or 'PCM', dragging the VD slider gives message "Error decompressing video fram xxx. An unknown error occurred (may be corrupt data). (error code -100)". Needless to say, VD will not process the data any more so than dvd2svcd. A manual load to TMPGE yields a blank screen preview.
Numerous codecs installed. Of relevence would seem to be Xvid MPEG-4 video codec and AC-3 ACM Decompressor.
The XVIDS play fine using wither WMP or my default ATI file player.
Follows is a sample log from a convwewsion attempt to SVCD. The whole process blew thru in about 5 minutes resulting in a 60MB mpg of 45 minutes of the correct audio on a blurry "AviSource Could not decompress......" frozen frame.
Appreciate any help.
WNASPI32.DLL 4.6.0.1021
--------------------------------------------------------
- 8/1/2004 1:44:09 PM
- AVI to SVCD Conversion
- AVI2DVD ver. 1.2.2 build 1
--------------------------------------------------------
Initializing
- D:\stuff.avi
Initializing finished.
--------------------------------------------------------
- 8/1/2004 1:44:12 PM
- Free on drive D: 73593.91 mb
- AUDIO Extraction
--------------------------------------------------------
Audio extraction finished.
--------------------------------------------------------
- 8/1/2004 1:44:31 PM
- Free on drive D: 73526.22 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: D:\dvd2svcd\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\dvd2svcd\Extracted_audio_1.ac3" -output "D:\DVD2SVCD\Encoded_audio_1.mp2" -logfile "D:\DVD2SVCD\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )
Audio conversion of D:\dvd2svcd\Extracted_audio_1.ac3 finished.
Audio conversion finished.
--------------------------------------------------------
- 8/1/2004 1:49:56 PM
- Free on drive D: 73468.16 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------
Executing Cinema Craft Encoder.
StreamSectors: 4682829788
AudioSectors: 413672
VideoPAPO: 72533124
ScanOffsetBytes: 360
SeqAligningBytes: 22880
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 4609859748.00
Seconds: 17.00
CalcMPEGStream: 4609859748.00
Frames: 240
CDSize: 4480.00
Number of CDs: 1
Cut point 4476.00
Variable Settings:
Frames: 240
Anti Noise Filter: Off
Passes: 3
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 2000
Max. bitrate: 8000
Avg. Bitrate: 2500
Aspect Ratio: 4:3 (No borders, encoded as 4:3)
---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.5PL\MPEG2DEC\MPEG2D~1.DLL")
AVISource("D:\SG-107~1\SG-107~1.AVI",audio=false)
ConvertToYUY2()
BilinearResize(720,576)
----AVS End----
Closing program
CCE Max Speed: 16.200
Video Encoding finished.
--------------------------------------------------------
- 8/1/2004 1:50:41 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:43 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:46 PM
- Free on drive D: 73467.13 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 8/1/2004 1:50:49 PM
- Free on drive D: 73467.13 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 0
Executing bbMPEG.
Variable Settings:
Movie offset: 0 seconds
Cut point: 4476 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\dvd2svcd\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.
Image creation finished.
--------------------------------------------------------
- 8/1/2004 1:50:59 PM
- Free on drive D: 73407.50 mb
- Conversion done!
--------------------------------------------------------