GDI+ error

[videokid]

Trying to run DVDRebuilder latest version 0.55 gave me the error "GDI+ does not exist"

A search through this forum gave me the explanation that MS GDI is not installed for WIN98SE and a link to MS to get gdiplus.dll

I got this file and put it in the DVDReBuilder directory as instructed.

Now I get the error

"GDIPLoadImageFromFile Failed: 3"

Any advice to get it working would be appreciated.

Thanks

[dannyv]

I seem to be having the same problem (GDI+ does not exist) as the post above using cce 2.67 and got GDIPLoadImageFromFile Failed: 3 when I tried the work around as above. With cce 250 and HC encoder I get m2v file is missing. Please see my signature at the bottom of this post for my system specs

Here is the log file when cce 2.67 was used.

-----------------
[19:35:28] Phase I, PREPARATION started.
- ECLCCE encoder selected.
- VTS_02: 1,880,833 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 124,983 frames.
-- Building .AVS and .ECL files
- VTS_03: 1,833,240 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 126,602 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 58.4%
- Overall Bitrate : 3,664/2,931Kbs
- Space for Video : 3,754,898KB
- HIGH/LOW/TYPICAL Bitrates: 3,786/1,136/2,931 Kbs
[19:45:00] Phase I, PREPARATION completed in 10 minutes.
[19:52:19] Phase II ENCODING started
- Creating M2V for VTS_02 segment 0
-- Encoding resulted in no .M2V, retrying.
- Creating M2V for VTS_02 segment 0

Here is the item.ecl file from the creation of the first m2v file

; Cinema Craft Encoder SP -- Encoder Control List
; Created by DVD Rebuilder

[item]
title=V02000000001001
aud_out=0
vaf_file=D:\WORK\D2VAVS\V02000000001001.vaf
aud_file=D:\WORK\D2VAVS\V02000000001001.mpa
file_focused=0
packet_size=2048
width=720
height=480
frame_rate_idx=1
cbr_brate=6000
vbr_brate_avg=3247
vbr_brate_min=500
vbr_brate_max=8930
seq_endcode=0
dvd=0
half_width=0
half_height=0
lum_level=0
adjust_q_matrix=0
aspect_ratio=3
gop_m=3
gop_nm=4
gop_hdr=12
seq_hdr=1
all_closed_gop=0
fix_gop_length=0
samples_per_sec=44100
stereo=2
brate_idx=7
crc=1
progressive=1
alternate_scan=0
intra_dc_prec=0
intra_dc_precision_9_max=1
intra_dc_precision_10_max=1
aud_mode=0
tc_ref_frm=0
drop_frame=0
fix_vbv_delay=0
letter_box=0
pulldown_detect=0
offset_line=0
create_new_vaf=1
credits_tweak=0
credits_start=0x00000
credits_brate=1000
h_filter=0
h_filter_idx=8
dither=0
dither_max=8
quality_prec=20
timecode=0x0000000
video_type=4
vid_file0=D:\WORK\D2VAVS\V02000000001001.m2v
vid_file1=D:\WORK\D2VAVS\V02000000001001.m2v
vid_out=1
vaf_out=1
opv_q_factor=20
opv_brate_min=0
opv_brate_max=8930
vbr_bias=15
vbr_pass=2
use_filter=0
filter_val=6
non_linear=1
top_first=0
mpeg1=0
mpeg1_cps=1
qmat_idx=-1
q_scale_type=1
qmat=
08 16 19 22 26 27 99 99
16 16 22 24 27 29 99 99
19 22 26 27 29 34 99 99
22 22 26 27 29 34 99 99
22 26 27 29 32 35 99 99
26 27 29 32 35 40 99 99
26 27 29 34 38 46 99 99
27 29 35 38 46 56 99 99
16 17 18 19 20 21 99 99
17 18 19 20 21 22 99 99
18 19 20 21 22 23 99 99
19 20 21 22 23 24 99 99
20 21 22 23 25 26 99 99
21 22 23 24 26 27 99 99
22 23 24 26 27 28 99 99
23 24 25 27 28 30 99 99

[file]
name=D:\WORK\D2VAVS\V02000000001001.avs
frame_first=0
frame_last=4061
encode_first=0
encode_last=4061

And finally the rebuilder.ini file

[Options]
Skin=Simple Blue
CCE=1
OneClick=0
EncoderMinimized=1
Completed=12
NoWarn=1
ReduceOpt=0
AdditionalOutput=1
LogFile=1
HalfD1=000
Convert_16_9=000
DisableInterlace=000
Mode=1
HC_Quality=1
HC_Matrix=1
HalfExtras=0
SkinVersion=10
MainMatrix=Low Bitrate
DVD_Label=1
DVD_Name=1.ISO
QuEncHQ=0
QuEncodeType=0
MovieOnly=0
ProCoder_Quality=4
AudioDub=1
iDCT=0
GOP=0
DCPrec=1
LowMatrix=Same as Main Feature
VLowMatrix=Same as Main Feature
ExtraMatrix=Same as Main Feature
ConvertToYUY2=1
HC_VBR_Bias=20
HC_OPV=0
[CCEOptions]
VBR_bias=15
Quality_prec=20
eclPasses=3
OPV=0
[Paths]
CCENEW=C:\dvd rebuilder install\eclecc\eclecc267\EclCCE.exe
CCE250=C:\video software\Cinemacraft Encoder sp v2.50.exe
MPEG2DEC=C:\Program Files\AviSynth2\plugins\DGDecode.dll
Source=E:\MIAMI\1\
Working=D:\WORK\
Output=D:\MIAMI\1\
CCEBasic=C:\dvd rebuilder install\eclecc\ccebasic\EclCCE.exe
HC=C:\dvd rebuilder install\HCbatch_016.exe
[Setup]
Languages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
sLanguages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
[Audio]
Selected=10010
Remapping=
[Subpictures]
Selected=


Please help

[jdobbs]

That's a CCE error. Reinstall AVISYNTH. Usually that means it has been hosed somehow.

[dannyv]

That's a CCE errror. Reinstall AVISYNTH. Usually that means it has been hosed somehow.

I reinstalled AVISYNTH and it worked like a charm. As usual you were right on the money again.....thanks jdobbs.

[jdobbs]

I'm glad it worked.