Angle cells can`t be linked

[arlsair]

Error Angle Cell "VTS10_Title1_PGC1_PG1_C1" and Angle Cell "VTS10_Title1_PGC1_PG2_C1" can not be linked.

Does anybody knows a solution ?

[D3s7]

your going to have to give us a LOT more info then that....

[arlsair]

Good point.
I did DoItFast4U! -> ScenAid -> BatchCCE -> Scenarist. The video is Half D1, but this is nothing special, as I did several DVD with this resolution. Also multi angles DVDs.

Here is the IFO structure:

PGC_1 (program chain): [Title(TTN): 1] [00:02:31.10 / 25 fps] (Programs: 2) (Cells: 4) (uses VOB-IDs: 1,2,3,4)

[Ch 01] [Pg 01] [Cell 01] [V/C Id: 1/ 1] (Angle 1): time: 00:02:30.05 / 25 fps [Pos: 00:02:30.05] [Frames: 3755] SP/ILVU/DISC/SA:[ no/yes/yes/yes]
[Cell 02] [V/C Id: 2/ 1] (Angle 2): time: 00:02:30.05 / 25 fps [Pos: 00:02:30.05] [Frames: 3755] SP/ILVU/DISC/SA:[ no/yes/yes/yes]

[Ch 02] [Pg 02] [Cell 03] [V/C Id: 3/ 1] (Angle 1): time: 00:00:01.05 / 25 fps [Pos: 00:02:31.10] [Frames: 3785] SP/ILVU/DISC/SA:[ no/yes/yes/yes]
[Cell 04] [V/C Id: 4/ 1] (Angle 2): time: 00:00:01.05 / 25 fps [Pos: 00:02:31.10] [Frames: 3785] SP/ILVU/DISC/SA:[ no/yes/yes/yes]


PGC_2 (program chain): [Title(TTN): 2] [00:01:41.10 / 25 fps] (Programs: 2) (Cells: 4) (uses VOB-IDs: 5,6,7,8)

[Ch 01] [Pg 01] [Cell 01] [V/C Id: 5/ 1] (Angle 1): time: 00:01:40.05 / 25 fps [Pos: 00:01:40.05] [Frames: 2505] SP/ILVU/DISC/SA:[ no/yes/yes/yes]
[Cell 02] [V/C Id: 6/ 1] (Angle 2): time: 00:01:40.05 / 25 fps [Pos: 00:01:40.05] [Frames: 2505] SP/ILVU/DISC/SA:[ no/yes/yes/yes]

[Ch 02] [Pg 02] [Cell 03] [V/C Id: 7/ 1] (Angle 1): time: 00:00:01.05 / 25 fps [Pos: 00:01:41.10] [Frames: 2535] SP/ILVU/DISC/SA:[ no/yes/yes/yes]

[Cell 04] [V/C Id: 8/ 1] (Angle 2): time: 00:00:01.05 / 25 fps [Pos: 00:01:41.10] [Frames: 2535] SP/ILVU/DISC/SA:[ no/yes/yes/yes]


PGC_3 (program chain): [Title(TTN): 3] [00:01:04.11 / 25 fps] (Programs: 2) (Cells: 4) (uses VOB-IDs: 9,10,11,12)
[Ch 01] [Pg 01] [Cell 01] [V/C Id: 9/ 1] (Angle 1): time: 00:01:03.06 / 25 fps [Pos: 00:01:03.06] [Frames: 1581] SP/ILVU/DISC/SA:[ no/yes/yes/yes]

[Cell 02] [V/C Id: 10/ 1] (Angle 2): time: 00:01:03.06 / 25 fps [Pos: 00:01:03.06] [Frames: 1581] SP/ILVU/DISC/SA:[ no/yes/yes/yes]
[Ch 02] [Pg 02] [Cell 03] [V/C Id: 11/ 1] (Angle 1): time: 00:00:01.05 / 25 fps [Pos: 00:01:04.11] [Frames: 1611] SP/ILVU/DISC/SA:[ no/yes/yes/yes]

[Cell 04] [V/C Id: 12/ 1] (Angle 2): time: 00:00:01.05 / 25 fps [Pos: 00:01:04.11] [Frames: 1611] SP/ILVU/DISC/SA:[ no/yes/yes/yes]
This structure is correctly recreated in Scenarist.

If you miss some info, please ask for it.

[D3s7]

i'm guessing you demuxed by PGC which ScenAid can't handle yet (angles via PGC)

[arlsair]

Sorry, no.

[D3s7]

well then again we need more info

how did you demux?

did you get any import errors into scenarist?

when do you get that error? on compile?

did you set the proper flags in BatchCCE for angles?

[arlsair]

I demuxed by VobID, I get the normal "width is wrong" error because of the half D1, no other errors. The error is directly after the muxing, after it is read from the database. I set the flags in BatchCCE.